Bearing issues
#31
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from
naOsc.33742$cA1.22976@fe13.usenetserver.com,
but <noEmail@please.com> wouldn't let me go...
| Just drive the jeep, the noise from the bad bearings is only
| half as annoying as someone criticizing you as you try to help
| them.
|
|
| "Joseph P" <jpribe@nc.rr.com> wrote in message
| news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
||
||
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Not criticism dude, it is annoyance. You make the assumption that I
have no idea what I am talking about. Instead of answering my
question, you bring question my decision to pull the rear drive shaft.
All I wanted to know about was driving by utilizing the front end
only. And you still haven't answered that.
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
naOsc.33742$cA1.22976@fe13.usenetserver.com,
but <noEmail@please.com> wouldn't let me go...
| Just drive the jeep, the noise from the bad bearings is only
| half as annoying as someone criticizing you as you try to help
| them.
|
|
| "Joseph P" <jpribe@nc.rr.com> wrote in message
| news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
||
||
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Not criticism dude, it is annoyance. You make the assumption that I
have no idea what I am talking about. Instead of answering my
question, you bring question my decision to pull the rear drive shaft.
All I wanted to know about was driving by utilizing the front end
only. And you still haven't answered that.
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#32
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from
naOsc.33742$cA1.22976@fe13.usenetserver.com,
but <noEmail@please.com> wouldn't let me go...
| Just drive the jeep, the noise from the bad bearings is only
| half as annoying as someone criticizing you as you try to help
| them.
|
|
| "Joseph P" <jpribe@nc.rr.com> wrote in message
| news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
||
||
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Not criticism dude, it is annoyance. You make the assumption that I
have no idea what I am talking about. Instead of answering my
question, you bring question my decision to pull the rear drive shaft.
All I wanted to know about was driving by utilizing the front end
only. And you still haven't answered that.
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
naOsc.33742$cA1.22976@fe13.usenetserver.com,
but <noEmail@please.com> wouldn't let me go...
| Just drive the jeep, the noise from the bad bearings is only
| half as annoying as someone criticizing you as you try to help
| them.
|
|
| "Joseph P" <jpribe@nc.rr.com> wrote in message
| news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
||
||
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Not criticism dude, it is annoyance. You make the assumption that I
have no idea what I am talking about. Instead of answering my
question, you bring question my decision to pull the rear drive shaft.
All I wanted to know about was driving by utilizing the front end
only. And you still haven't answered that.
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#33
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from
naOsc.33742$cA1.22976@fe13.usenetserver.com,
but <noEmail@please.com> wouldn't let me go...
| Just drive the jeep, the noise from the bad bearings is only
| half as annoying as someone criticizing you as you try to help
| them.
|
|
| "Joseph P" <jpribe@nc.rr.com> wrote in message
| news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
||
||
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Not criticism dude, it is annoyance. You make the assumption that I
have no idea what I am talking about. Instead of answering my
question, you bring question my decision to pull the rear drive shaft.
All I wanted to know about was driving by utilizing the front end
only. And you still haven't answered that.
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
naOsc.33742$cA1.22976@fe13.usenetserver.com,
but <noEmail@please.com> wouldn't let me go...
| Just drive the jeep, the noise from the bad bearings is only
| half as annoying as someone criticizing you as you try to help
| them.
|
|
| "Joseph P" <jpribe@nc.rr.com> wrote in message
| news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
||
||
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Not criticism dude, it is annoyance. You make the assumption that I
have no idea what I am talking about. Instead of answering my
question, you bring question my decision to pull the rear drive shaft.
All I wanted to know about was driving by utilizing the front end
only. And you still haven't answered that.
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#34
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from MRTsc.69$gZ4.123434@news.uswest.net,
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#35
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from MRTsc.69$gZ4.123434@news.uswest.net,
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#36
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from MRTsc.69$gZ4.123434@news.uswest.net,
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#37
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from MRTsc.69$gZ4.123434@news.uswest.net,
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <spamless@microsoft.net> wouldn't let me go...
| Many of us find BOTTOM posting to be a pain. Shrug.
|
| Joseph P wrote:
|
|| I was trying to save myself from
|| 4vLsc.60791$U4.7529@fe29.usenetserver.com,
|| but <noEmail@please.com> wouldn't let me go...
||
|||
|||
||| "Joseph P" <jpribe@nc.rr.com> wrote in message
||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
|||| Can't get into the shop soon enough, and my TJ is my only
|||| vehicle...needs opinions (fact would be better) as to how
|||| long I can drive on the front axle. Read as: Rear
|||| propeller shaft (driveshaft) removed from vehicle, transfer
|||| case place in 4H.
||||
||
||| What bearings are bad?
|| Pinion bearings, maybe carrier as well, getting it rebuilt,
|| probably by Rob @ http://www.downeastoffroad.com/
||
||| Does removing the rear axle stop those bearings from moving?
|| No, but by doing so, and removing anykind of actual load from
|| those bearing, the noise has gone away, so I do indeed know
|| what the problem is.
||
||| Can you remove the driveline without losing fluid out of
||| your t
|| case?
|| Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase
|| (has splined output shaft.)
||
|| And don't top post, it is terrible netiquette
||
||||
||||
|||| --
|||| --
|||| Joe Pribe
|||| NC
|||| jpribe 'at' nc.rr.com
|||| jegp 'at' hotmail.com
|||| ---- I Love My O|||||||O TJ
You don't find the readability in better. Maybe you don't spend
enough time on usenet to care...that's fine...as much as Bill posts
though, I wish he would do it "properly." Of course, I am not
twisting anyone's arm here, am I?
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#38
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from 40B3DC12.27BD3AFF@sympatico.ca,
but <romainm@sympatico.ca> wouldn't let me go...
| I drove for quite a while like that in my CJ7. I was very
| careful about accelerating with the wheels turned hard, but
| other than that I run in 4x4 for weeks at a time in the
| winter. I don't expect damage....
|
| Just make sure you don't lose the fluid. I think Jerry B said
| a WD40 cap will fit right on and a hose clamp holds it....
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
| 88 Cherokee 235 BFG AT's
|
| Joseph P wrote:
||
|| Can't get into the shop soon enough, and my TJ is my only
|| vehicle...needs opinions (fact would be better) as to how
|| long I can drive on the front axle. Read as: Rear propeller
|| shaft (driveshaft) removed from vehicle, transfer case place
|| in 4H.
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Mike, how exactly would I lose the fluid? Rusty's posts aside, I am
not trying to be a d!ck, maybe I am smoking something. Or, by telling
me I should be losing fluid, you are really telling me I need a CJ.
;)
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <romainm@sympatico.ca> wouldn't let me go...
| I drove for quite a while like that in my CJ7. I was very
| careful about accelerating with the wheels turned hard, but
| other than that I run in 4x4 for weeks at a time in the
| winter. I don't expect damage....
|
| Just make sure you don't lose the fluid. I think Jerry B said
| a WD40 cap will fit right on and a hose clamp holds it....
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
| 88 Cherokee 235 BFG AT's
|
| Joseph P wrote:
||
|| Can't get into the shop soon enough, and my TJ is my only
|| vehicle...needs opinions (fact would be better) as to how
|| long I can drive on the front axle. Read as: Rear propeller
|| shaft (driveshaft) removed from vehicle, transfer case place
|| in 4H.
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Mike, how exactly would I lose the fluid? Rusty's posts aside, I am
not trying to be a d!ck, maybe I am smoking something. Or, by telling
me I should be losing fluid, you are really telling me I need a CJ.
;)
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#39
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from 40B3DC12.27BD3AFF@sympatico.ca,
but <romainm@sympatico.ca> wouldn't let me go...
| I drove for quite a while like that in my CJ7. I was very
| careful about accelerating with the wheels turned hard, but
| other than that I run in 4x4 for weeks at a time in the
| winter. I don't expect damage....
|
| Just make sure you don't lose the fluid. I think Jerry B said
| a WD40 cap will fit right on and a hose clamp holds it....
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
| 88 Cherokee 235 BFG AT's
|
| Joseph P wrote:
||
|| Can't get into the shop soon enough, and my TJ is my only
|| vehicle...needs opinions (fact would be better) as to how
|| long I can drive on the front axle. Read as: Rear propeller
|| shaft (driveshaft) removed from vehicle, transfer case place
|| in 4H.
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Mike, how exactly would I lose the fluid? Rusty's posts aside, I am
not trying to be a d!ck, maybe I am smoking something. Or, by telling
me I should be losing fluid, you are really telling me I need a CJ.
;)
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <romainm@sympatico.ca> wouldn't let me go...
| I drove for quite a while like that in my CJ7. I was very
| careful about accelerating with the wheels turned hard, but
| other than that I run in 4x4 for weeks at a time in the
| winter. I don't expect damage....
|
| Just make sure you don't lose the fluid. I think Jerry B said
| a WD40 cap will fit right on and a hose clamp holds it....
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
| 88 Cherokee 235 BFG AT's
|
| Joseph P wrote:
||
|| Can't get into the shop soon enough, and my TJ is my only
|| vehicle...needs opinions (fact would be better) as to how
|| long I can drive on the front axle. Read as: Rear propeller
|| shaft (driveshaft) removed from vehicle, transfer case place
|| in 4H.
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Mike, how exactly would I lose the fluid? Rusty's posts aside, I am
not trying to be a d!ck, maybe I am smoking something. Or, by telling
me I should be losing fluid, you are really telling me I need a CJ.
;)
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
#40
Guest
Posts: n/a
Re: Bearing issues
I was trying to save myself from 40B3DC12.27BD3AFF@sympatico.ca,
but <romainm@sympatico.ca> wouldn't let me go...
| I drove for quite a while like that in my CJ7. I was very
| careful about accelerating with the wheels turned hard, but
| other than that I run in 4x4 for weeks at a time in the
| winter. I don't expect damage....
|
| Just make sure you don't lose the fluid. I think Jerry B said
| a WD40 cap will fit right on and a hose clamp holds it....
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
| 88 Cherokee 235 BFG AT's
|
| Joseph P wrote:
||
|| Can't get into the shop soon enough, and my TJ is my only
|| vehicle...needs opinions (fact would be better) as to how
|| long I can drive on the front axle. Read as: Rear propeller
|| shaft (driveshaft) removed from vehicle, transfer case place
|| in 4H.
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Mike, how exactly would I lose the fluid? Rusty's posts aside, I am
not trying to be a d!ck, maybe I am smoking something. Or, by telling
me I should be losing fluid, you are really telling me I need a CJ.
;)
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ
but <romainm@sympatico.ca> wouldn't let me go...
| I drove for quite a while like that in my CJ7. I was very
| careful about accelerating with the wheels turned hard, but
| other than that I run in 4x4 for weeks at a time in the
| winter. I don't expect damage....
|
| Just make sure you don't lose the fluid. I think Jerry B said
| a WD40 cap will fit right on and a hose clamp holds it....
|
| Mike
| 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
| 88 Cherokee 235 BFG AT's
|
| Joseph P wrote:
||
|| Can't get into the shop soon enough, and my TJ is my only
|| vehicle...needs opinions (fact would be better) as to how
|| long I can drive on the front axle. Read as: Rear propeller
|| shaft (driveshaft) removed from vehicle, transfer case place
|| in 4H.
||
|| --
|| --
|| Joe Pribe
|| NC
|| jpribe 'at' nc.rr.com
|| jegp 'at' hotmail.com
|| ---- I Love My O|||||||O TJ
Mike, how exactly would I lose the fluid? Rusty's posts aside, I am
not trying to be a d!ck, maybe I am smoking something. Or, by telling
me I should be losing fluid, you are really telling me I need a CJ.
;)
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com
jegp 'at' hotmail.com
---- I Love My O|||||||O TJ