Bearing issues
#11
Guest
Posts: n/a
Re: Bearing issues
Just drive the jeep, the noise from the bad bearings is only half as
annoying as someone criticizing you as you try to help them.
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
> I was trying to save myself from
> 4vLsc.60791$U4.7529@fe29.usenetserver.com,
> but <noEmail@please.com> wouldn't let me go...
>
> |
> |
> | "Joseph P" <jpribe@nc.rr.com> wrote in message
> | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
> || Can't get into the shop soon enough, and my TJ is my only
> || vehicle...needs opinions (fact would be better) as to how
> || long I can drive on the front axle. Read as: Rear propeller
> || shaft (driveshaft) removed from vehicle, transfer case place
> || in 4H.
> ||
>
> | What bearings are bad?
> Pinion bearings, maybe carrier as well, getting it rebuilt, probably
> by Rob @ http://www.downeastoffroad.com/
>
> | Does removing the rear axle stop those bearings from moving?
> No, but by doing so, and removing anykind of actual load from those
> bearing, the noise has gone away, so I do indeed know what the problem
> is.
>
> | Can you remove the driveline without losing fluid out of your t
> case?
> Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
> splined output shaft.)
>
> And don't top post, it is terrible netiquette
>
> ||
> ||
> || --
> || --
> || Joe Pribe
> || NC
> || jpribe 'at' nc.rr.com
> || jegp 'at' hotmail.com
> || ---- I Love My O|||||||O TJ
>
>
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com
> jegp 'at' hotmail.com
> ---- I Love My O|||||||O TJ
>
annoying as someone criticizing you as you try to help them.
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
> I was trying to save myself from
> 4vLsc.60791$U4.7529@fe29.usenetserver.com,
> but <noEmail@please.com> wouldn't let me go...
>
> |
> |
> | "Joseph P" <jpribe@nc.rr.com> wrote in message
> | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
> || Can't get into the shop soon enough, and my TJ is my only
> || vehicle...needs opinions (fact would be better) as to how
> || long I can drive on the front axle. Read as: Rear propeller
> || shaft (driveshaft) removed from vehicle, transfer case place
> || in 4H.
> ||
>
> | What bearings are bad?
> Pinion bearings, maybe carrier as well, getting it rebuilt, probably
> by Rob @ http://www.downeastoffroad.com/
>
> | Does removing the rear axle stop those bearings from moving?
> No, but by doing so, and removing anykind of actual load from those
> bearing, the noise has gone away, so I do indeed know what the problem
> is.
>
> | Can you remove the driveline without losing fluid out of your t
> case?
> Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
> splined output shaft.)
>
> And don't top post, it is terrible netiquette
>
> ||
> ||
> || --
> || --
> || Joe Pribe
> || NC
> || jpribe 'at' nc.rr.com
> || jegp 'at' hotmail.com
> || ---- I Love My O|||||||O TJ
>
>
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com
> jegp 'at' hotmail.com
> ---- I Love My O|||||||O TJ
>
#12
Guest
Posts: n/a
Re: Bearing issues
Just drive the jeep, the noise from the bad bearings is only half as
annoying as someone criticizing you as you try to help them.
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
> I was trying to save myself from
> 4vLsc.60791$U4.7529@fe29.usenetserver.com,
> but <noEmail@please.com> wouldn't let me go...
>
> |
> |
> | "Joseph P" <jpribe@nc.rr.com> wrote in message
> | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
> || Can't get into the shop soon enough, and my TJ is my only
> || vehicle...needs opinions (fact would be better) as to how
> || long I can drive on the front axle. Read as: Rear propeller
> || shaft (driveshaft) removed from vehicle, transfer case place
> || in 4H.
> ||
>
> | What bearings are bad?
> Pinion bearings, maybe carrier as well, getting it rebuilt, probably
> by Rob @ http://www.downeastoffroad.com/
>
> | Does removing the rear axle stop those bearings from moving?
> No, but by doing so, and removing anykind of actual load from those
> bearing, the noise has gone away, so I do indeed know what the problem
> is.
>
> | Can you remove the driveline without losing fluid out of your t
> case?
> Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
> splined output shaft.)
>
> And don't top post, it is terrible netiquette
>
> ||
> ||
> || --
> || --
> || Joe Pribe
> || NC
> || jpribe 'at' nc.rr.com
> || jegp 'at' hotmail.com
> || ---- I Love My O|||||||O TJ
>
>
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com
> jegp 'at' hotmail.com
> ---- I Love My O|||||||O TJ
>
annoying as someone criticizing you as you try to help them.
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
> I was trying to save myself from
> 4vLsc.60791$U4.7529@fe29.usenetserver.com,
> but <noEmail@please.com> wouldn't let me go...
>
> |
> |
> | "Joseph P" <jpribe@nc.rr.com> wrote in message
> | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
> || Can't get into the shop soon enough, and my TJ is my only
> || vehicle...needs opinions (fact would be better) as to how
> || long I can drive on the front axle. Read as: Rear propeller
> || shaft (driveshaft) removed from vehicle, transfer case place
> || in 4H.
> ||
>
> | What bearings are bad?
> Pinion bearings, maybe carrier as well, getting it rebuilt, probably
> by Rob @ http://www.downeastoffroad.com/
>
> | Does removing the rear axle stop those bearings from moving?
> No, but by doing so, and removing anykind of actual load from those
> bearing, the noise has gone away, so I do indeed know what the problem
> is.
>
> | Can you remove the driveline without losing fluid out of your t
> case?
> Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
> splined output shaft.)
>
> And don't top post, it is terrible netiquette
>
> ||
> ||
> || --
> || --
> || Joe Pribe
> || NC
> || jpribe 'at' nc.rr.com
> || jegp 'at' hotmail.com
> || ---- I Love My O|||||||O TJ
>
>
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com
> jegp 'at' hotmail.com
> ---- I Love My O|||||||O TJ
>
#13
Guest
Posts: n/a
Re: Bearing issues
Just drive the jeep, the noise from the bad bearings is only half as
annoying as someone criticizing you as you try to help them.
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
> I was trying to save myself from
> 4vLsc.60791$U4.7529@fe29.usenetserver.com,
> but <noEmail@please.com> wouldn't let me go...
>
> |
> |
> | "Joseph P" <jpribe@nc.rr.com> wrote in message
> | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
> || Can't get into the shop soon enough, and my TJ is my only
> || vehicle...needs opinions (fact would be better) as to how
> || long I can drive on the front axle. Read as: Rear propeller
> || shaft (driveshaft) removed from vehicle, transfer case place
> || in 4H.
> ||
>
> | What bearings are bad?
> Pinion bearings, maybe carrier as well, getting it rebuilt, probably
> by Rob @ http://www.downeastoffroad.com/
>
> | Does removing the rear axle stop those bearings from moving?
> No, but by doing so, and removing anykind of actual load from those
> bearing, the noise has gone away, so I do indeed know what the problem
> is.
>
> | Can you remove the driveline without losing fluid out of your t
> case?
> Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
> splined output shaft.)
>
> And don't top post, it is terrible netiquette
>
> ||
> ||
> || --
> || --
> || Joe Pribe
> || NC
> || jpribe 'at' nc.rr.com
> || jegp 'at' hotmail.com
> || ---- I Love My O|||||||O TJ
>
>
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com
> jegp 'at' hotmail.com
> ---- I Love My O|||||||O TJ
>
annoying as someone criticizing you as you try to help them.
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
> I was trying to save myself from
> 4vLsc.60791$U4.7529@fe29.usenetserver.com,
> but <noEmail@please.com> wouldn't let me go...
>
> |
> |
> | "Joseph P" <jpribe@nc.rr.com> wrote in message
> | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om...
> || Can't get into the shop soon enough, and my TJ is my only
> || vehicle...needs opinions (fact would be better) as to how
> || long I can drive on the front axle. Read as: Rear propeller
> || shaft (driveshaft) removed from vehicle, transfer case place
> || in 4H.
> ||
>
> | What bearings are bad?
> Pinion bearings, maybe carrier as well, getting it rebuilt, probably
> by Rob @ http://www.downeastoffroad.com/
>
> | Does removing the rear axle stop those bearings from moving?
> No, but by doing so, and removing anykind of actual load from those
> bearing, the noise has gone away, so I do indeed know what the problem
> is.
>
> | Can you remove the driveline without losing fluid out of your t
> case?
> Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
> splined output shaft.)
>
> And don't top post, it is terrible netiquette
>
> ||
> ||
> || --
> || --
> || Joe Pribe
> || NC
> || jpribe 'at' nc.rr.com
> || jegp 'at' hotmail.com
> || ---- I Love My O|||||||O TJ
>
>
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com
> jegp 'at' hotmail.com
> ---- I Love My O|||||||O TJ
>
#14
Guest
Posts: n/a
Re: Bearing issues
Did you write anything? I can't find it you did.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
#15
Guest
Posts: n/a
Re: Bearing issues
Did you write anything? I can't find it you did.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
#16
Guest
Posts: n/a
Re: Bearing issues
Did you write anything? I can't find it you did.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
#17
Guest
Posts: n/a
Re: Bearing issues
Did you write anything? I can't find it you did.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Joseph P wrote:
#18
Guest
Posts: n/a
Re: Bearing issues
:)
Rusted wrote:
> Just drive the jeep, the noise from the bad bearings is only half as
> annoying as someone criticizing you as you try to help them.
>
>
> "Joseph P" <jpribe@nc.rr.com> wrote in message
> news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
>
>>I was trying to save myself from
>>4vLsc.60791$U4.7529@fe29.usenetserver.com,
>>but <noEmail@please.com> wouldn't let me go...
>>| Can you remove the driveline without losing fluid out of your t
>>case?
>>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
>>splined output shaft.)
>>
>>And don't top post, it is terrible netiquette
Rusted wrote:
> Just drive the jeep, the noise from the bad bearings is only half as
> annoying as someone criticizing you as you try to help them.
>
>
> "Joseph P" <jpribe@nc.rr.com> wrote in message
> news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
>
>>I was trying to save myself from
>>4vLsc.60791$U4.7529@fe29.usenetserver.com,
>>but <noEmail@please.com> wouldn't let me go...
>>| Can you remove the driveline without losing fluid out of your t
>>case?
>>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
>>splined output shaft.)
>>
>>And don't top post, it is terrible netiquette
#19
Guest
Posts: n/a
Re: Bearing issues
:)
Rusted wrote:
> Just drive the jeep, the noise from the bad bearings is only half as
> annoying as someone criticizing you as you try to help them.
>
>
> "Joseph P" <jpribe@nc.rr.com> wrote in message
> news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
>
>>I was trying to save myself from
>>4vLsc.60791$U4.7529@fe29.usenetserver.com,
>>but <noEmail@please.com> wouldn't let me go...
>>| Can you remove the driveline without losing fluid out of your t
>>case?
>>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
>>splined output shaft.)
>>
>>And don't top post, it is terrible netiquette
Rusted wrote:
> Just drive the jeep, the noise from the bad bearings is only half as
> annoying as someone criticizing you as you try to help them.
>
>
> "Joseph P" <jpribe@nc.rr.com> wrote in message
> news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
>
>>I was trying to save myself from
>>4vLsc.60791$U4.7529@fe29.usenetserver.com,
>>but <noEmail@please.com> wouldn't let me go...
>>| Can you remove the driveline without losing fluid out of your t
>>case?
>>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
>>splined output shaft.)
>>
>>And don't top post, it is terrible netiquette
#20
Guest
Posts: n/a
Re: Bearing issues
:)
Rusted wrote:
> Just drive the jeep, the noise from the bad bearings is only half as
> annoying as someone criticizing you as you try to help them.
>
>
> "Joseph P" <jpribe@nc.rr.com> wrote in message
> news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
>
>>I was trying to save myself from
>>4vLsc.60791$U4.7529@fe29.usenetserver.com,
>>but <noEmail@please.com> wouldn't let me go...
>>| Can you remove the driveline without losing fluid out of your t
>>case?
>>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
>>splined output shaft.)
>>
>>And don't top post, it is terrible netiquette
Rusted wrote:
> Just drive the jeep, the noise from the bad bearings is only half as
> annoying as someone criticizing you as you try to help them.
>
>
> "Joseph P" <jpribe@nc.rr.com> wrote in message
> news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om...
>
>>I was trying to save myself from
>>4vLsc.60791$U4.7529@fe29.usenetserver.com,
>>but <noEmail@please.com> wouldn't let me go...
>>| Can you remove the driveline without losing fluid out of your t
>>case?
>>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has
>>splined output shaft.)
>>
>>And don't top post, it is terrible netiquette