1988 Jeep Comanche clutch hydraulic fluid ?
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I don't know what was wrong, but you couldn't have 'ruined' any seals
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I don't know what was wrong, but you couldn't have 'ruined' any seals
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I don't know what was wrong, but you couldn't have 'ruined' any seals
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I don't know what was wrong, but you couldn't have 'ruined' any seals
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
using DOT 3 brake fluid.
If bleeding it 'made it' go bad, it was bad to start with. Nothing you
could have done to wreck it more.
Thanks for the update.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Well guy this is what happened, after everything was pulled the
> pressure plate was new and so was the disk I had them checked , the
> Slave looked new , the flywheel was just fine , so I had him just
> install the new Slave I ha d already installed the new master , and
> replaced the pilot bushing but it looked fine , , well that did it
> clutch works fine , I guess what happened was that when I tried to
> change the fluid it the system I ruined the seals in the Slave and it
> would not work correctly, it can't be rebuilt , my mechanic said it
> was a first for him , but I am finding out that jeeps are like that , I
> have the old Slave if someone wants it, just pay the shipping.
>
> Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I think that if I would have recompressed the old slave and reinstalled
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I think that if I would have recompressed the old slave and reinstalled
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I think that if I would have recompressed the old slave and reinstalled
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I think that if I would have recompressed the old slave and reinstalled
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
it, might have worked, remember it has those two straps that release
when the Slave is first engaged, the problem is once you get air into
the system unless you compress that Slave back all the way down like
when it it's new you can't bleed it completely.
Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
Well, it 'can' be a bugger but it will for sure bleed. Because you
tried the bleed unsuccessfully to fix the noise issue, I suspect the
slave was just plain bad. It happens, even new out of the box.
I really doubt you harmed anything.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> I think that if I would have recompressed the old slave and reinstalled
> it, might have worked, remember it has those two straps that release
> when the Slave is first engaged, the problem is once you get air into
> the system unless you compress that Slave back all the way down like
> when it it's new you can't bleed it completely.
> Curtis
tried the bleed unsuccessfully to fix the noise issue, I suspect the
slave was just plain bad. It happens, even new out of the box.
I really doubt you harmed anything.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> I think that if I would have recompressed the old slave and reinstalled
> it, might have worked, remember it has those two straps that release
> when the Slave is first engaged, the problem is once you get air into
> the system unless you compress that Slave back all the way down like
> when it it's new you can't bleed it completely.
> Curtis
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
Well, it 'can' be a bugger but it will for sure bleed. Because you
tried the bleed unsuccessfully to fix the noise issue, I suspect the
slave was just plain bad. It happens, even new out of the box.
I really doubt you harmed anything.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> I think that if I would have recompressed the old slave and reinstalled
> it, might have worked, remember it has those two straps that release
> when the Slave is first engaged, the problem is once you get air into
> the system unless you compress that Slave back all the way down like
> when it it's new you can't bleed it completely.
> Curtis
tried the bleed unsuccessfully to fix the noise issue, I suspect the
slave was just plain bad. It happens, even new out of the box.
I really doubt you harmed anything.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> I think that if I would have recompressed the old slave and reinstalled
> it, might have worked, remember it has those two straps that release
> when the Slave is first engaged, the problem is once you get air into
> the system unless you compress that Slave back all the way down like
> when it it's new you can't bleed it completely.
> Curtis
