1988 Jeep Comanche clutch hydraulic fluid ?
03-15-2005, 04:04 PM
#14
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
That's the way it's designed, it just sits loosely on the input,
where a normal throw-out would slide:
http://www.----------.com/YJslave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ctops wrote:
>
> I just got this Jeep I was told the clutch was just replaced , I can
> see the master cylinder is new , the fluid was dirty so I drained it
> out and replaced it I was told that Dot 3 brake fluid was fine by the
> NAPA guy, now my clutch works but makes a "rattling sound" when fully
> engaged , tried bleeding off the system , the 2 lines that come out of
> the Bell-housing are not secure must be a part missing that holds them
> the line with the bleeder valve can be pushed in and out , need
> schematic to see if part is missing, any help will be greatly
> appreciated
> Curt
where a normal throw-out would slide:
http://www.----------.com/YJslave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ctops wrote:
>
> I just got this Jeep I was told the clutch was just replaced , I can
> see the master cylinder is new , the fluid was dirty so I drained it
> out and replaced it I was told that Dot 3 brake fluid was fine by the
> NAPA guy, now my clutch works but makes a "rattling sound" when fully
> engaged , tried bleeding off the system , the 2 lines that come out of
> the Bell-housing are not secure must be a part missing that holds them
> the line with the bleeder valve can be pushed in and out , need
> schematic to see if part is missing, any help will be greatly
> appreciated
> Curt
03-15-2005, 04:04 PM
#15
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
That's the way it's designed, it just sits loosely on the input,
where a normal throw-out would slide:
http://www.----------.com/YJslave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ctops wrote:
>
> I just got this Jeep I was told the clutch was just replaced , I can
> see the master cylinder is new , the fluid was dirty so I drained it
> out and replaced it I was told that Dot 3 brake fluid was fine by the
> NAPA guy, now my clutch works but makes a "rattling sound" when fully
> engaged , tried bleeding off the system , the 2 lines that come out of
> the Bell-housing are not secure must be a part missing that holds them
> the line with the bleeder valve can be pushed in and out , need
> schematic to see if part is missing, any help will be greatly
> appreciated
> Curt
where a normal throw-out would slide:
http://www.----------.com/YJslave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ctops wrote:
>
> I just got this Jeep I was told the clutch was just replaced , I can
> see the master cylinder is new , the fluid was dirty so I drained it
> out and replaced it I was told that Dot 3 brake fluid was fine by the
> NAPA guy, now my clutch works but makes a "rattling sound" when fully
> engaged , tried bleeding off the system , the 2 lines that come out of
> the Bell-housing are not secure must be a part missing that holds them
> the line with the bleeder valve can be pushed in and out , need
> schematic to see if part is missing, any help will be greatly
> appreciated
> Curt
03-15-2005, 04:04 PM
#16
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
That's the way it's designed, it just sits loosely on the input,
where a normal throw-out would slide:
http://www.----------.com/YJslave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ctops wrote:
>
> I just got this Jeep I was told the clutch was just replaced , I can
> see the master cylinder is new , the fluid was dirty so I drained it
> out and replaced it I was told that Dot 3 brake fluid was fine by the
> NAPA guy, now my clutch works but makes a "rattling sound" when fully
> engaged , tried bleeding off the system , the 2 lines that come out of
> the Bell-housing are not secure must be a part missing that holds them
> the line with the bleeder valve can be pushed in and out , need
> schematic to see if part is missing, any help will be greatly
> appreciated
> Curt
where a normal throw-out would slide:
http://www.----------.com/YJslave.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
ctops wrote:
>
> I just got this Jeep I was told the clutch was just replaced , I can
> see the master cylinder is new , the fluid was dirty so I drained it
> out and replaced it I was told that Dot 3 brake fluid was fine by the
> NAPA guy, now my clutch works but makes a "rattling sound" when fully
> engaged , tried bleeding off the system , the 2 lines that come out of
> the Bell-housing are not secure must be a part missing that holds them
> the line with the bleeder valve can be pushed in and out , need
> schematic to see if part is missing, any help will be greatly
> appreciated
> Curt
03-15-2005, 04:17 PM
#17
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
??????
Your clutch now works?
I don't see you replying anywhere except here and no new topic seems to
be mentioned.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Sorry My problem is not from this main topic ,, , please respond to my
> first reply as new topic ,,
> sorry again
> Curtis
Your clutch now works?
I don't see you replying anywhere except here and no new topic seems to
be mentioned.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Sorry My problem is not from this main topic ,, , please respond to my
> first reply as new topic ,,
> sorry again
> Curtis
03-15-2005, 04:17 PM
#18
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
??????
Your clutch now works?
I don't see you replying anywhere except here and no new topic seems to
be mentioned.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Sorry My problem is not from this main topic ,, , please respond to my
> first reply as new topic ,,
> sorry again
> Curtis
Your clutch now works?
I don't see you replying anywhere except here and no new topic seems to
be mentioned.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Sorry My problem is not from this main topic ,, , please respond to my
> first reply as new topic ,,
> sorry again
> Curtis
03-15-2005, 04:17 PM
#19
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
??????
Your clutch now works?
I don't see you replying anywhere except here and no new topic seems to
be mentioned.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Sorry My problem is not from this main topic ,, , please respond to my
> first reply as new topic ,,
> sorry again
> Curtis
Your clutch now works?
I don't see you replying anywhere except here and no new topic seems to
be mentioned.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
ctops wrote:
>
> Sorry My problem is not from this main topic ,, , please respond to my
> first reply as new topic ,,
> sorry again
> Curtis
03-16-2005, 07:22 AM
#20
Guest
Posts: n/a
Re: 1988 Jeep Comanche clutch hydraulic fluid ?
I had to repair one of these types of clutch slave release bearings. The
previous "mechanic" had not used the pin and it's locking nut to secure the
slave to the transmission. The slave would move too much and then collaspe
creating no disengagement when the clutch pedal was depressed and then
eventually start leaking.
After I secured the new one........no more problems! Does seem weird
though. lol
Parts came from the dealer and did not seem like they cost $800, but I did
not have to buy them! 8^)
later,
dave AKA vwdoc1
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42374DD3.5BEDDE01@***.net...
> That's the way it's designed, it just sits loosely on the input,
> where a normal throw-out would slide:
> http://www.----------.com/YJslave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> ctops wrote:
> >
> > I just got this Jeep I was told the clutch was just replaced , I can
> > see the master cylinder is new , the fluid was dirty so I drained it
> > out and replaced it I was told that Dot 3 brake fluid was fine by the
> > NAPA guy, now my clutch works but makes a "rattling sound" when fully
> > engaged , tried bleeding off the system , the 2 lines that come out of
> > the Bell-housing are not secure must be a part missing that holds them
> > the line with the bleeder valve can be pushed in and out , need
> > schematic to see if part is missing, any help will be greatly
> > appreciated
> > Curt
previous "mechanic" had not used the pin and it's locking nut to secure the
slave to the transmission. The slave would move too much and then collaspe
creating no disengagement when the clutch pedal was depressed and then
eventually start leaking.
After I secured the new one........no more problems! Does seem weird
though. lol
Parts came from the dealer and did not seem like they cost $800, but I did
not have to buy them! 8^)
later,
dave AKA vwdoc1
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42374DD3.5BEDDE01@***.net...
> That's the way it's designed, it just sits loosely on the input,
> where a normal throw-out would slide:
> http://www.----------.com/YJslave.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> ctops wrote:
> >
> > I just got this Jeep I was told the clutch was just replaced , I can
> > see the master cylinder is new , the fluid was dirty so I drained it
> > out and replaced it I was told that Dot 3 brake fluid was fine by the
> > NAPA guy, now my clutch works but makes a "rattling sound" when fully
> > engaged , tried bleeding off the system , the 2 lines that come out of
> > the Bell-housing are not secure must be a part missing that holds them
> > the line with the bleeder valve can be pushed in and out , need
> > schematic to see if part is missing, any help will be greatly
> > appreciated
> > Curt