Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

Can this be programmed by me or do I have to take it to the dealer?The ring
loop broke and I used the old circuit board in the new housing but still
would like to know.

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

http://dodgeram.info/tsb/2002/08-007-02.htm
God Bless America, Bill O|||||||O
mailto:----------@----------.com


" <joe>" <do@peoplepc.com> wrote in message
news:13ktafujus9r2fa@corp.supernews.com...
> Can this be programmed by me or do I have to take it to the dealer?The
ring
> loop broke and I used the old circuit board in the new housing but still
> would like to know.
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

http://dodgeram.info/tsb/2002/08-007-02.htm
God Bless America, Bill O|||||||O
mailto:----------@----------.com


" <joe>" <do@peoplepc.com> wrote in message
news:13ktafujus9r2fa@corp.supernews.com...
> Can this be programmed by me or do I have to take it to the dealer?The
ring
> loop broke and I used the old circuit board in the new housing but still
> would like to know.
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

http://dodgeram.info/tsb/2002/08-007-02.htm
God Bless America, Bill O|||||||O
mailto:----------@----------.com


" <joe>" <do@peoplepc.com> wrote in message
news:13ktafujus9r2fa@corp.supernews.com...
> Can this be programmed by me or do I have to take it to the dealer?The
ring
> loop broke and I used the old circuit board in the new housing but still
> would like to know.
>
>

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

http://dodgeram.info/tsb/2002/08-007-02.htm
God Bless America, Bill O|||||||O
mailto:----------@----------.com


" <joe>" <do@peoplepc.com> wrote in message
news:13ktafujus9r2fa@corp.supernews.com...
> Can this be programmed by me or do I have to take it to the dealer?The
ring
> loop broke and I used the old circuit board in the new housing but still
> would like to know.
>
>

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

In article <13ktafujus9r2fa@corp.supernews.com>, <joe> wrote:
#Can this be programmed by me or do I have to take it to the dealer?The ring
#loop broke and I used the old circuit board in the new housing but still
#would like to know.

You need a working DRBIII (DRBthree) scan tool. Non-Mopar aftermarket
models cost around $2500.00. Mopar ones go for $3600.00. I think it's
safe to say that you should take it to a dealer or a well-off locksmith
who had the scratch to get one.

/herb

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

In article <13ktafujus9r2fa@corp.supernews.com>, <joe> wrote:
#Can this be programmed by me or do I have to take it to the dealer?The ring
#loop broke and I used the old circuit board in the new housing but still
#would like to know.

You need a working DRBIII (DRBthree) scan tool. Non-Mopar aftermarket
models cost around $2500.00. Mopar ones go for $3600.00. I think it's
safe to say that you should take it to a dealer or a well-off locksmith
who had the scratch to get one.

/herb

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

herb@urusei.net (Herb Leong) wrote:

> In article <13ktafujus9r2fa@corp.supernews.com>, <joe> wrote:
> #Can this be programmed by me or do I have to take it to the
> dealer?The ring #loop broke and I used the old circuit board in
> the new housing but still #would like to know.
>
> You need a working DRBIII (DRBthree) scan tool.

You're kidding? My '93 GC remote keyless entry transmitter programmed
itself just by following the instructions packaged with the new one I
had to buy.

If it requires a scan tool I'd be very surprised.




--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

herb@urusei.net (Herb Leong) wrote:

> In article <13ktafujus9r2fa@corp.supernews.com>, <joe> wrote:
> #Can this be programmed by me or do I have to take it to the
> dealer?The ring #loop broke and I used the old circuit board in
> the new housing but still #would like to know.
>
> You need a working DRBIII (DRBthree) scan tool.

You're kidding? My '93 GC remote keyless entry transmitter programmed
itself just by following the instructions packaged with the new one I
had to buy.

If it requires a scan tool I'd be very surprised.




--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: Remote Keyless EntryTransmitter?/2002Grand Cherroke
 

" <joe>" <do@peoplepc.com> wrote:

> Can this be programmed by me or do I have to take it to the
> dealer?The ring loop broke and I used the old circuit board in the
> new housing but still would like to know.

http://www.keylessremotesonline.com/...productId=2212



--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org