Re: Maybe slightly OT. trailer winch wiring
 

Mike,

The diode is not in series with the load. It is in parallel with the
solenoid, to bleed off the rather large voltage spike that can come off of
it, when the power is removed. That spike can bypass the battery and
anything else in your system, and operating via Murphy's Law will seek out
the most fragile electronic component it can find. Even a vehicle battery
does not "instantly" absorb a voltage spike of the kind we are talking
about. Otoh, this discussion is probably academic. I haven't cut apart a
Ford starter solenoid lately, but it probably has something inside of it to
avoid lawsuits from fried stereos and PCMs.

Lon,

I mentioned the isolation switch way back near the beginning of this thread.
They are great to have with any trailer electrical system. They give one
the option to drive home, in the event the trailer system drains its
battery.

Earle

"Lon" <lon.stowell@comcast.net> wrote in message
news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> Mike Romain proclaimed:
>
> > You guys keep talking about electronics..... We are talking winches and
> > starters hooked up to guess what? A battery, which as you say can
> > handle most any spike that comes out of a starter solenoid.
> >
> > You post like an engineer. I am one of the poor techies that has to fix
> > what you engineers overdesign all to ----. LOL!
>
> Yeah, to quote a fellow engineer...involving a major magic smoke
> situation where someone decided to redesign a power circuit:
> "One can only admire the creativity of this field solution...."
> >
> > Why in the world would someone want to put a diode in a freaking winch
> > circuit that resides on a trailer with its own independent battery
> > power???
> >
> > For that matter even trying to find a diode that can handle a winch at
> > full load, well....
>
> Available, but the suggested diode is not in series so a cheap GE
> glass/ceramic is overkill. Or just leave them off and use a staged
> switch where a commercial auto relay already has everything needed.
>
> If that battery trailer is connected to a main vehicle during operation,
> then I'd probably add isolation as well.
> >
> > I like the KISS principle myself....
>
> I like the KISSbutnottooSS.




*** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

Mike,

The diode is not in series with the load. It is in parallel with the
solenoid, to bleed off the rather large voltage spike that can come off of
it, when the power is removed. That spike can bypass the battery and
anything else in your system, and operating via Murphy's Law will seek out
the most fragile electronic component it can find. Even a vehicle battery
does not "instantly" absorb a voltage spike of the kind we are talking
about. Otoh, this discussion is probably academic. I haven't cut apart a
Ford starter solenoid lately, but it probably has something inside of it to
avoid lawsuits from fried stereos and PCMs.

Lon,

I mentioned the isolation switch way back near the beginning of this thread.
They are great to have with any trailer electrical system. They give one
the option to drive home, in the event the trailer system drains its
battery.

Earle

"Lon" <lon.stowell@comcast.net> wrote in message
news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> Mike Romain proclaimed:
>
> > You guys keep talking about electronics..... We are talking winches and
> > starters hooked up to guess what? A battery, which as you say can
> > handle most any spike that comes out of a starter solenoid.
> >
> > You post like an engineer. I am one of the poor techies that has to fix
> > what you engineers overdesign all to ----. LOL!
>
> Yeah, to quote a fellow engineer...involving a major magic smoke
> situation where someone decided to redesign a power circuit:
> "One can only admire the creativity of this field solution...."
> >
> > Why in the world would someone want to put a diode in a freaking winch
> > circuit that resides on a trailer with its own independent battery
> > power???
> >
> > For that matter even trying to find a diode that can handle a winch at
> > full load, well....
>
> Available, but the suggested diode is not in series so a cheap GE
> glass/ceramic is overkill. Or just leave them off and use a staged
> switch where a commercial auto relay already has everything needed.
>
> If that battery trailer is connected to a main vehicle during operation,
> then I'd probably add isolation as well.
> >
> > I like the KISS principle myself....
>
> I like the KISSbutnottooSS.




*** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

Mike,

The diode is not in series with the load. It is in parallel with the
solenoid, to bleed off the rather large voltage spike that can come off of
it, when the power is removed. That spike can bypass the battery and
anything else in your system, and operating via Murphy's Law will seek out
the most fragile electronic component it can find. Even a vehicle battery
does not "instantly" absorb a voltage spike of the kind we are talking
about. Otoh, this discussion is probably academic. I haven't cut apart a
Ford starter solenoid lately, but it probably has something inside of it to
avoid lawsuits from fried stereos and PCMs.

Lon,

I mentioned the isolation switch way back near the beginning of this thread.
They are great to have with any trailer electrical system. They give one
the option to drive home, in the event the trailer system drains its
battery.

Earle

"Lon" <lon.stowell@comcast.net> wrote in message
news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> Mike Romain proclaimed:
>
> > You guys keep talking about electronics..... We are talking winches and
> > starters hooked up to guess what? A battery, which as you say can
> > handle most any spike that comes out of a starter solenoid.
> >
> > You post like an engineer. I am one of the poor techies that has to fix
> > what you engineers overdesign all to ----. LOL!
>
> Yeah, to quote a fellow engineer...involving a major magic smoke
> situation where someone decided to redesign a power circuit:
> "One can only admire the creativity of this field solution...."
> >
> > Why in the world would someone want to put a diode in a freaking winch
> > circuit that resides on a trailer with its own independent battery
> > power???
> >
> > For that matter even trying to find a diode that can handle a winch at
> > full load, well....
>
> Available, but the suggested diode is not in series so a cheap GE
> glass/ceramic is overkill. Or just leave them off and use a staged
> switch where a commercial auto relay already has everything needed.
>
> If that battery trailer is connected to a main vehicle during operation,
> then I'd probably add isolation as well.
> >
> > I like the KISS principle myself....
>
> I like the KISSbutnottooSS.




*** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

Then the OP has no worries if the Jeep/Ford starter solenoids he bought
should already be 'safe' to use on vehicles eh? Especially on his
'Jeep'... ;-\

Mike

Earle Horton wrote:
>
> Mike,
>
> The diode is not in series with the load. It is in parallel with the
> solenoid, to bleed off the rather large voltage spike that can come off of
> it, when the power is removed. That spike can bypass the battery and
> anything else in your system, and operating via Murphy's Law will seek out
> the most fragile electronic component it can find. Even a vehicle battery
> does not "instantly" absorb a voltage spike of the kind we are talking
> about. Otoh, this discussion is probably academic. I haven't cut apart a
> Ford starter solenoid lately, but it probably has something inside of it to
> avoid lawsuits from fried stereos and PCMs.
>
> Lon,
>
> I mentioned the isolation switch way back near the beginning of this thread.
> They are great to have with any trailer electrical system. They give one
> the option to drive home, in the event the trailer system drains its
> battery.
>
> Earle
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > Mike Romain proclaimed:
> >
> > > You guys keep talking about electronics..... We are talking winches and
> > > starters hooked up to guess what? A battery, which as you say can
> > > handle most any spike that comes out of a starter solenoid.
> > >
> > > You post like an engineer. I am one of the poor techies that has to fix
> > > what you engineers overdesign all to ----. LOL!
> >
> > Yeah, to quote a fellow engineer...involving a major magic smoke
> > situation where someone decided to redesign a power circuit:
> > "One can only admire the creativity of this field solution...."
> > >
> > > Why in the world would someone want to put a diode in a freaking winch
> > > circuit that resides on a trailer with its own independent battery
> > > power???
> > >
> > > For that matter even trying to find a diode that can handle a winch at
> > > full load, well....
> >
> > Available, but the suggested diode is not in series so a cheap GE
> > glass/ceramic is overkill. Or just leave them off and use a staged
> > switch where a commercial auto relay already has everything needed.
> >
> > If that battery trailer is connected to a main vehicle during operation,
> > then I'd probably add isolation as well.
> > >
> > > I like the KISS principle myself....
> >
> > I like the KISSbutnottooSS.
>
> *** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

Then the OP has no worries if the Jeep/Ford starter solenoids he bought
should already be 'safe' to use on vehicles eh? Especially on his
'Jeep'... ;-\

Mike

Earle Horton wrote:
>
> Mike,
>
> The diode is not in series with the load. It is in parallel with the
> solenoid, to bleed off the rather large voltage spike that can come off of
> it, when the power is removed. That spike can bypass the battery and
> anything else in your system, and operating via Murphy's Law will seek out
> the most fragile electronic component it can find. Even a vehicle battery
> does not "instantly" absorb a voltage spike of the kind we are talking
> about. Otoh, this discussion is probably academic. I haven't cut apart a
> Ford starter solenoid lately, but it probably has something inside of it to
> avoid lawsuits from fried stereos and PCMs.
>
> Lon,
>
> I mentioned the isolation switch way back near the beginning of this thread.
> They are great to have with any trailer electrical system. They give one
> the option to drive home, in the event the trailer system drains its
> battery.
>
> Earle
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > Mike Romain proclaimed:
> >
> > > You guys keep talking about electronics..... We are talking winches and
> > > starters hooked up to guess what? A battery, which as you say can
> > > handle most any spike that comes out of a starter solenoid.
> > >
> > > You post like an engineer. I am one of the poor techies that has to fix
> > > what you engineers overdesign all to ----. LOL!
> >
> > Yeah, to quote a fellow engineer...involving a major magic smoke
> > situation where someone decided to redesign a power circuit:
> > "One can only admire the creativity of this field solution...."
> > >
> > > Why in the world would someone want to put a diode in a freaking winch
> > > circuit that resides on a trailer with its own independent battery
> > > power???
> > >
> > > For that matter even trying to find a diode that can handle a winch at
> > > full load, well....
> >
> > Available, but the suggested diode is not in series so a cheap GE
> > glass/ceramic is overkill. Or just leave them off and use a staged
> > switch where a commercial auto relay already has everything needed.
> >
> > If that battery trailer is connected to a main vehicle during operation,
> > then I'd probably add isolation as well.
> > >
> > > I like the KISS principle myself....
> >
> > I like the KISSbutnottooSS.
>
> *** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

Then the OP has no worries if the Jeep/Ford starter solenoids he bought
should already be 'safe' to use on vehicles eh? Especially on his
'Jeep'... ;-\

Mike

Earle Horton wrote:
>
> Mike,
>
> The diode is not in series with the load. It is in parallel with the
> solenoid, to bleed off the rather large voltage spike that can come off of
> it, when the power is removed. That spike can bypass the battery and
> anything else in your system, and operating via Murphy's Law will seek out
> the most fragile electronic component it can find. Even a vehicle battery
> does not "instantly" absorb a voltage spike of the kind we are talking
> about. Otoh, this discussion is probably academic. I haven't cut apart a
> Ford starter solenoid lately, but it probably has something inside of it to
> avoid lawsuits from fried stereos and PCMs.
>
> Lon,
>
> I mentioned the isolation switch way back near the beginning of this thread.
> They are great to have with any trailer electrical system. They give one
> the option to drive home, in the event the trailer system drains its
> battery.
>
> Earle
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > Mike Romain proclaimed:
> >
> > > You guys keep talking about electronics..... We are talking winches and
> > > starters hooked up to guess what? A battery, which as you say can
> > > handle most any spike that comes out of a starter solenoid.
> > >
> > > You post like an engineer. I am one of the poor techies that has to fix
> > > what you engineers overdesign all to ----. LOL!
> >
> > Yeah, to quote a fellow engineer...involving a major magic smoke
> > situation where someone decided to redesign a power circuit:
> > "One can only admire the creativity of this field solution...."
> > >
> > > Why in the world would someone want to put a diode in a freaking winch
> > > circuit that resides on a trailer with its own independent battery
> > > power???
> > >
> > > For that matter even trying to find a diode that can handle a winch at
> > > full load, well....
> >
> > Available, but the suggested diode is not in series so a cheap GE
> > glass/ceramic is overkill. Or just leave them off and use a staged
> > switch where a commercial auto relay already has everything needed.
> >
> > If that battery trailer is connected to a main vehicle during operation,
> > then I'd probably add isolation as well.
> > >
> > > I like the KISS principle myself....
> >
> > I like the KISSbutnottooSS.
>
> *** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

That's what I'm thinking. But I would definitely wire in an isolation
circuit. The kind I am thinking of is diode based, and assures that the
trailer electrics only get power from the vehicle alternator, not from the
vehicle battery. Any camping supply store should have one in stock,
complete with wiring diagram.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:447A253B.4B4CCF8E@sympatico.ca...
> Then the OP has no worries if the Jeep/Ford starter solenoids he bought
> should already be 'safe' to use on vehicles eh? Especially on his
> 'Jeep'... ;-\
>
> Mike
>
> Earle Horton wrote:
> >
> > Mike,
> >
> > The diode is not in series with the load. It is in parallel with the
> > solenoid, to bleed off the rather large voltage spike that can come off
of
> > it, when the power is removed. That spike can bypass the battery and
> > anything else in your system, and operating via Murphy's Law will seek
out
> > the most fragile electronic component it can find. Even a vehicle
battery
> > does not "instantly" absorb a voltage spike of the kind we are talking
> > about. Otoh, this discussion is probably academic. I haven't cut apart
a
> > Ford starter solenoid lately, but it probably has something inside of it
to
> > avoid lawsuits from fried stereos and PCMs.
> >
> > Lon,
> >
> > I mentioned the isolation switch way back near the beginning of this
thread.
> > They are great to have with any trailer electrical system. They give
one
> > the option to drive home, in the event the trailer system drains its
> > battery.
> >
> > Earle
> >
> > "Lon" <lon.stowell@comcast.net> wrote in message
> > news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > > Mike Romain proclaimed:
> > >
> > > > You guys keep talking about electronics..... We are talking winches
and
> > > > starters hooked up to guess what? A battery, which as you say can
> > > > handle most any spike that comes out of a starter solenoid.
> > > >
> > > > You post like an engineer. I am one of the poor techies that has to
fix
> > > > what you engineers overdesign all to ----. LOL!
> > >
> > > Yeah, to quote a fellow engineer...involving a major magic smoke
> > > situation where someone decided to redesign a power circuit:
> > > "One can only admire the creativity of this field solution...."
> > > >
> > > > Why in the world would someone want to put a diode in a freaking
winch
> > > > circuit that resides on a trailer with its own independent battery
> > > > power???
> > > >
> > > > For that matter even trying to find a diode that can handle a winch
at
> > > > full load, well....
> > >
> > > Available, but the suggested diode is not in series so a cheap GE
> > > glass/ceramic is overkill. Or just leave them off and use a staged
> > > switch where a commercial auto relay already has everything needed.
> > >
> > > If that battery trailer is connected to a main vehicle during
operation,
> > > then I'd probably add isolation as well.
> > > >
> > > > I like the KISS principle myself....
> > >
> > > I like the KISSbutnottooSS.
> >
> > *** Posted via a free Usenet account from http://www.teranews.com ***



*** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

That's what I'm thinking. But I would definitely wire in an isolation
circuit. The kind I am thinking of is diode based, and assures that the
trailer electrics only get power from the vehicle alternator, not from the
vehicle battery. Any camping supply store should have one in stock,
complete with wiring diagram.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:447A253B.4B4CCF8E@sympatico.ca...
> Then the OP has no worries if the Jeep/Ford starter solenoids he bought
> should already be 'safe' to use on vehicles eh? Especially on his
> 'Jeep'... ;-\
>
> Mike
>
> Earle Horton wrote:
> >
> > Mike,
> >
> > The diode is not in series with the load. It is in parallel with the
> > solenoid, to bleed off the rather large voltage spike that can come off
of
> > it, when the power is removed. That spike can bypass the battery and
> > anything else in your system, and operating via Murphy's Law will seek
out
> > the most fragile electronic component it can find. Even a vehicle
battery
> > does not "instantly" absorb a voltage spike of the kind we are talking
> > about. Otoh, this discussion is probably academic. I haven't cut apart
a
> > Ford starter solenoid lately, but it probably has something inside of it
to
> > avoid lawsuits from fried stereos and PCMs.
> >
> > Lon,
> >
> > I mentioned the isolation switch way back near the beginning of this
thread.
> > They are great to have with any trailer electrical system. They give
one
> > the option to drive home, in the event the trailer system drains its
> > battery.
> >
> > Earle
> >
> > "Lon" <lon.stowell@comcast.net> wrote in message
> > news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > > Mike Romain proclaimed:
> > >
> > > > You guys keep talking about electronics..... We are talking winches
and
> > > > starters hooked up to guess what? A battery, which as you say can
> > > > handle most any spike that comes out of a starter solenoid.
> > > >
> > > > You post like an engineer. I am one of the poor techies that has to
fix
> > > > what you engineers overdesign all to ----. LOL!
> > >
> > > Yeah, to quote a fellow engineer...involving a major magic smoke
> > > situation where someone decided to redesign a power circuit:
> > > "One can only admire the creativity of this field solution...."
> > > >
> > > > Why in the world would someone want to put a diode in a freaking
winch
> > > > circuit that resides on a trailer with its own independent battery
> > > > power???
> > > >
> > > > For that matter even trying to find a diode that can handle a winch
at
> > > > full load, well....
> > >
> > > Available, but the suggested diode is not in series so a cheap GE
> > > glass/ceramic is overkill. Or just leave them off and use a staged
> > > switch where a commercial auto relay already has everything needed.
> > >
> > > If that battery trailer is connected to a main vehicle during
operation,
> > > then I'd probably add isolation as well.
> > > >
> > > > I like the KISS principle myself....
> > >
> > > I like the KISSbutnottooSS.
> >
> > *** Posted via a free Usenet account from http://www.teranews.com ***



*** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

That's what I'm thinking. But I would definitely wire in an isolation
circuit. The kind I am thinking of is diode based, and assures that the
trailer electrics only get power from the vehicle alternator, not from the
vehicle battery. Any camping supply store should have one in stock,
complete with wiring diagram.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:447A253B.4B4CCF8E@sympatico.ca...
> Then the OP has no worries if the Jeep/Ford starter solenoids he bought
> should already be 'safe' to use on vehicles eh? Especially on his
> 'Jeep'... ;-\
>
> Mike
>
> Earle Horton wrote:
> >
> > Mike,
> >
> > The diode is not in series with the load. It is in parallel with the
> > solenoid, to bleed off the rather large voltage spike that can come off
of
> > it, when the power is removed. That spike can bypass the battery and
> > anything else in your system, and operating via Murphy's Law will seek
out
> > the most fragile electronic component it can find. Even a vehicle
battery
> > does not "instantly" absorb a voltage spike of the kind we are talking
> > about. Otoh, this discussion is probably academic. I haven't cut apart
a
> > Ford starter solenoid lately, but it probably has something inside of it
to
> > avoid lawsuits from fried stereos and PCMs.
> >
> > Lon,
> >
> > I mentioned the isolation switch way back near the beginning of this
thread.
> > They are great to have with any trailer electrical system. They give
one
> > the option to drive home, in the event the trailer system drains its
> > battery.
> >
> > Earle
> >
> > "Lon" <lon.stowell@comcast.net> wrote in message
> > news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > > Mike Romain proclaimed:
> > >
> > > > You guys keep talking about electronics..... We are talking winches
and
> > > > starters hooked up to guess what? A battery, which as you say can
> > > > handle most any spike that comes out of a starter solenoid.
> > > >
> > > > You post like an engineer. I am one of the poor techies that has to
fix
> > > > what you engineers overdesign all to ----. LOL!
> > >
> > > Yeah, to quote a fellow engineer...involving a major magic smoke
> > > situation where someone decided to redesign a power circuit:
> > > "One can only admire the creativity of this field solution...."
> > > >
> > > > Why in the world would someone want to put a diode in a freaking
winch
> > > > circuit that resides on a trailer with its own independent battery
> > > > power???
> > > >
> > > > For that matter even trying to find a diode that can handle a winch
at
> > > > full load, well....
> > >
> > > Available, but the suggested diode is not in series so a cheap GE
> > > glass/ceramic is overkill. Or just leave them off and use a staged
> > > switch where a commercial auto relay already has everything needed.
> > >
> > > If that battery trailer is connected to a main vehicle during
operation,
> > > then I'd probably add isolation as well.
> > > >
> > > > I like the KISS principle myself....
> > >
> > > I like the KISSbutnottooSS.
> >
> > *** Posted via a free Usenet account from http://www.teranews.com ***



*** Posted via a free Usenet account from http://www.teranews.com ***

Re: Maybe slightly OT. trailer winch wiring
 

That is a totally different animal and needs to be treated the same as
putting a dual battery system into any vehicle. Let's not get the
'engineers' going on that one eh....

As you mention, they make some sweet off the shelf isolators these days
that sense the second batteries voltage so it never gets over charged or
cooks out the primary battery. I have seen some 'amazing' rube goldburg
designs for this that require a University degree and really specialized
equipment to set up, come out of 'engineers' posts.... LOL!

Mike

Earle Horton wrote:
>
> That's what I'm thinking. But I would definitely wire in an isolation
> circuit. The kind I am thinking of is diode based, and assures that the
> trailer electrics only get power from the vehicle alternator, not from the
> vehicle battery. Any camping supply store should have one in stock,
> complete with wiring diagram.
>
> Earle
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:447A253B.4B4CCF8E@sympatico.ca...
> > Then the OP has no worries if the Jeep/Ford starter solenoids he bought
> > should already be 'safe' to use on vehicles eh? Especially on his
> > 'Jeep'... ;-\
> >
> > Mike
> >
> > Earle Horton wrote:
> > >
> > > Mike,
> > >
> > > The diode is not in series with the load. It is in parallel with the
> > > solenoid, to bleed off the rather large voltage spike that can come off
> of
> > > it, when the power is removed. That spike can bypass the battery and
> > > anything else in your system, and operating via Murphy's Law will seek
> out
> > > the most fragile electronic component it can find. Even a vehicle
> battery
> > > does not "instantly" absorb a voltage spike of the kind we are talking
> > > about. Otoh, this discussion is probably academic. I haven't cut apart
> a
> > > Ford starter solenoid lately, but it probably has something inside of it
> to
> > > avoid lawsuits from fried stereos and PCMs.
> > >
> > > Lon,
> > >
> > > I mentioned the isolation switch way back near the beginning of this
> thread.
> > > They are great to have with any trailer electrical system. They give
> one
> > > the option to drive home, in the event the trailer system drains its
> > > battery.
> > >
> > > Earle
> > >
> > > "Lon" <lon.stowell@comcast.net> wrote in message
> > > news:8ridnXbpMdoLYuTZ4p2dnA@comcast.com...
> > > > Mike Romain proclaimed:
> > > >
> > > > > You guys keep talking about electronics..... We are talking winches
> and
> > > > > starters hooked up to guess what? A battery, which as you say can
> > > > > handle most any spike that comes out of a starter solenoid.
> > > > >
> > > > > You post like an engineer. I am one of the poor techies that has to
> fix
> > > > > what you engineers overdesign all to ----. LOL!
> > > >
> > > > Yeah, to quote a fellow engineer...involving a major magic smoke
> > > > situation where someone decided to redesign a power circuit:
> > > > "One can only admire the creativity of this field solution...."
> > > > >
> > > > > Why in the world would someone want to put a diode in a freaking
> winch
> > > > > circuit that resides on a trailer with its own independent battery
> > > > > power???
> > > > >
> > > > > For that matter even trying to find a diode that can handle a winch
> at
> > > > > full load, well....
> > > >
> > > > Available, but the suggested diode is not in series so a cheap GE
> > > > glass/ceramic is overkill. Or just leave them off and use a staged
> > > > switch where a commercial auto relay already has everything needed.
> > > >
> > > > If that battery trailer is connected to a main vehicle during
> operation,
> > > > then I'd probably add isolation as well.
> > > > >
> > > > > I like the KISS principle myself....
> > > >
> > > > I like the KISSbutnottooSS.
> > >
> > > *** Posted via a free Usenet account from http://www.teranews.com ***
>
> *** Posted via a free Usenet account from http://www.teranews.com ***