leaning out the 4.2L
Guest
Posts: n/a
Re: leaning out the 4.2L
In message <ve7Ke.170286$HI.142222@edtnps84>, "Pi-Eyed Piper" wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
Read my reply a little closer and you'll see that it wasn't to you, it was to
"Steve Foley", who asked about the stepper motor.
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:r99gf1t1osl5uo424oh46jn1dd5em2iefp@4ax.com.. .
>> In message <HVOJe.4117$lK2.3895@trndny01>, "Steve Foley" wrote:
>>
>>>I don't know, but I believe so.
>>
>> Yes, the "idle mixture screws" are only for idle mixture. However, get
>> them too
>> rich and they can affect mixture at higher RPM also.
>>
>>>
>>>Therefore, my addition to this question is:
>>>
>>>Are the metering pins/stepper motor/cancerous growth on the BBD only for
>>>idle mixture?
>>
>> No. The stepper motor has 2 pins mounted on it. One is for the idle
>> circuit,
>> the other is for the main circuit.
>>
>>
>>
>>>
>>>
>>>"Pi-Eyed Piper" <notta@hello.com> wrote in message
>>>news:FzOJe.172266$9A2.22664@edtnps89...
>>>> are the mixture screws only for idle mixture?
>>>
>>>
>
>I dont have a stepper motor, I changed the carb to one that doesn't have it
Read my reply a little closer and you'll see that it wasn't to you, it was to
"Steve Foley", who asked about the stepper motor.
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:r99gf1t1osl5uo424oh46jn1dd5em2iefp@4ax.com.. .
>> In message <HVOJe.4117$lK2.3895@trndny01>, "Steve Foley" wrote:
>>
>>>I don't know, but I believe so.
>>
>> Yes, the "idle mixture screws" are only for idle mixture. However, get
>> them too
>> rich and they can affect mixture at higher RPM also.
>>
>>>
>>>Therefore, my addition to this question is:
>>>
>>>Are the metering pins/stepper motor/cancerous growth on the BBD only for
>>>idle mixture?
>>
>> No. The stepper motor has 2 pins mounted on it. One is for the idle
>> circuit,
>> the other is for the main circuit.
>>
>>
>>
>>>
>>>
>>>"Pi-Eyed Piper" <notta@hello.com> wrote in message
>>>news:FzOJe.172266$9A2.22664@edtnps89...
>>>> are the mixture screws only for idle mixture?
>>>
>>>
>
Guest
Posts: n/a
Re: leaning out the 4.2L
In message <ve7Ke.170286$HI.142222@edtnps84>, "Pi-Eyed Piper" wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
Read my reply a little closer and you'll see that it wasn't to you, it was to
"Steve Foley", who asked about the stepper motor.
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:r99gf1t1osl5uo424oh46jn1dd5em2iefp@4ax.com.. .
>> In message <HVOJe.4117$lK2.3895@trndny01>, "Steve Foley" wrote:
>>
>>>I don't know, but I believe so.
>>
>> Yes, the "idle mixture screws" are only for idle mixture. However, get
>> them too
>> rich and they can affect mixture at higher RPM also.
>>
>>>
>>>Therefore, my addition to this question is:
>>>
>>>Are the metering pins/stepper motor/cancerous growth on the BBD only for
>>>idle mixture?
>>
>> No. The stepper motor has 2 pins mounted on it. One is for the idle
>> circuit,
>> the other is for the main circuit.
>>
>>
>>
>>>
>>>
>>>"Pi-Eyed Piper" <notta@hello.com> wrote in message
>>>news:FzOJe.172266$9A2.22664@edtnps89...
>>>> are the mixture screws only for idle mixture?
>>>
>>>
>
>I dont have a stepper motor, I changed the carb to one that doesn't have it
Read my reply a little closer and you'll see that it wasn't to you, it was to
"Steve Foley", who asked about the stepper motor.
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:r99gf1t1osl5uo424oh46jn1dd5em2iefp@4ax.com.. .
>> In message <HVOJe.4117$lK2.3895@trndny01>, "Steve Foley" wrote:
>>
>>>I don't know, but I believe so.
>>
>> Yes, the "idle mixture screws" are only for idle mixture. However, get
>> them too
>> rich and they can affect mixture at higher RPM also.
>>
>>>
>>>Therefore, my addition to this question is:
>>>
>>>Are the metering pins/stepper motor/cancerous growth on the BBD only for
>>>idle mixture?
>>
>> No. The stepper motor has 2 pins mounted on it. One is for the idle
>> circuit,
>> the other is for the main circuit.
>>
>>
>>
>>>
>>>
>>>"Pi-Eyed Piper" <notta@hello.com> wrote in message
>>>news:FzOJe.172266$9A2.22664@edtnps89...
>>>> are the mixture screws only for idle mixture?
>>>
>>>
>
Guest
Posts: n/a
Re: leaning out the 4.2L
In message <ve7Ke.170286$HI.142222@edtnps84>, "Pi-Eyed Piper" wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
Read my reply a little closer and you'll see that it wasn't to you, it was to
"Steve Foley", who asked about the stepper motor.
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:r99gf1t1osl5uo424oh46jn1dd5em2iefp@4ax.com.. .
>> In message <HVOJe.4117$lK2.3895@trndny01>, "Steve Foley" wrote:
>>
>>>I don't know, but I believe so.
>>
>> Yes, the "idle mixture screws" are only for idle mixture. However, get
>> them too
>> rich and they can affect mixture at higher RPM also.
>>
>>>
>>>Therefore, my addition to this question is:
>>>
>>>Are the metering pins/stepper motor/cancerous growth on the BBD only for
>>>idle mixture?
>>
>> No. The stepper motor has 2 pins mounted on it. One is for the idle
>> circuit,
>> the other is for the main circuit.
>>
>>
>>
>>>
>>>
>>>"Pi-Eyed Piper" <notta@hello.com> wrote in message
>>>news:FzOJe.172266$9A2.22664@edtnps89...
>>>> are the mixture screws only for idle mixture?
>>>
>>>
>
>I dont have a stepper motor, I changed the carb to one that doesn't have it
Read my reply a little closer and you'll see that it wasn't to you, it was to
"Steve Foley", who asked about the stepper motor.
>
>
>"bllsht" <nospam@invaliddot.net> wrote in message
>news:r99gf1t1osl5uo424oh46jn1dd5em2iefp@4ax.com.. .
>> In message <HVOJe.4117$lK2.3895@trndny01>, "Steve Foley" wrote:
>>
>>>I don't know, but I believe so.
>>
>> Yes, the "idle mixture screws" are only for idle mixture. However, get
>> them too
>> rich and they can affect mixture at higher RPM also.
>>
>>>
>>>Therefore, my addition to this question is:
>>>
>>>Are the metering pins/stepper motor/cancerous growth on the BBD only for
>>>idle mixture?
>>
>> No. The stepper motor has 2 pins mounted on it. One is for the idle
>> circuit,
>> the other is for the main circuit.
>>
>>
>>
>>>
>>>
>>>"Pi-Eyed Piper" <notta@hello.com> wrote in message
>>>news:FzOJe.172266$9A2.22664@edtnps89...
>>>> are the mixture screws only for idle mixture?
>>>
>>>
>
Guest
Posts: n/a
Re: leaning out the 4.2L
so what carb DO you have?
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: leaning out the 4.2L
so what carb DO you have?
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: leaning out the 4.2L
so what carb DO you have?
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: leaning out the 4.2L
so what carb DO you have?
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Pi-Eyed Piper wrote:
>I dont have a stepper motor, I changed the carb to one that doesn't have it
>
>>>I don't know, but I believe so.
>>
>[quoted text clipped - 12 lines]
>>
>>>> are the mixture screws only for idle mixture?
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: leaning out the 4.2L
Carter BBD with no stepper motor
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:529E5F1824106@CarKB.com...
> so what carb DO you have?
>
>
> Pi-Eyed Piper wrote:
>>I dont have a stepper motor, I changed the carb to one that doesn't have
>>it
>>
>>>>I don't know, but I believe so.
>>>
>>[quoted text clipped - 12 lines]
>>>
>>>>> are the mixture screws only for idle mixture?
>
>
> --
> Message posted via http://www.carkb.com
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:529E5F1824106@CarKB.com...
> so what carb DO you have?
>
>
> Pi-Eyed Piper wrote:
>>I dont have a stepper motor, I changed the carb to one that doesn't have
>>it
>>
>>>>I don't know, but I believe so.
>>>
>>[quoted text clipped - 12 lines]
>>>
>>>>> are the mixture screws only for idle mixture?
>
>
> --
> Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: leaning out the 4.2L
Carter BBD with no stepper motor
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:529E5F1824106@CarKB.com...
> so what carb DO you have?
>
>
> Pi-Eyed Piper wrote:
>>I dont have a stepper motor, I changed the carb to one that doesn't have
>>it
>>
>>>>I don't know, but I believe so.
>>>
>>[quoted text clipped - 12 lines]
>>>
>>>>> are the mixture screws only for idle mixture?
>
>
> --
> Message posted via http://www.carkb.com
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:529E5F1824106@CarKB.com...
> so what carb DO you have?
>
>
> Pi-Eyed Piper wrote:
>>I dont have a stepper motor, I changed the carb to one that doesn't have
>>it
>>
>>>>I don't know, but I believe so.
>>>
>>[quoted text clipped - 12 lines]
>>>
>>>>> are the mixture screws only for idle mixture?
>
>
> --
> Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: leaning out the 4.2L
Carter BBD with no stepper motor
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:529E5F1824106@CarKB.com...
> so what carb DO you have?
>
>
> Pi-Eyed Piper wrote:
>>I dont have a stepper motor, I changed the carb to one that doesn't have
>>it
>>
>>>>I don't know, but I believe so.
>>>
>>[quoted text clipped - 12 lines]
>>>
>>>>> are the mixture screws only for idle mixture?
>
>
> --
> Message posted via http://www.carkb.com
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:529E5F1824106@CarKB.com...
> so what carb DO you have?
>
>
> Pi-Eyed Piper wrote:
>>I dont have a stepper motor, I changed the carb to one that doesn't have
>>it
>>
>>>>I don't know, but I believe so.
>>>
>>[quoted text clipped - 12 lines]
>>>
>>>>> are the mixture screws only for idle mixture?
>
>
> --
> Message posted via http://www.carkb.com
