leaning out the 4.2L
08-08-2005, 03:34 PM
#6
Guest
Posts: n/a
Re: leaning out the 4.2L
LOL!
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
08-08-2005, 03:34 PM
#7
Guest
Posts: n/a
Re: leaning out the 4.2L
LOL!
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
08-08-2005, 03:34 PM
#8
Guest
Posts: n/a
Re: leaning out the 4.2L
LOL!
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
08-08-2005, 03:34 PM
#9
Guest
Posts: n/a
Re: leaning out the 4.2L
LOL!
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >
I was busy. Clockwise screws it in which leans it out.
The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.
If it won't lean out, then suspect blocked idle tubes.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >