leaning out the 4.2L
 

on a 4.2L, am I turning counterclockwise to lean the mixture?

Re: leaning out the 4.2L
 

Is this such a goofy question no one will answer??

"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:URLJe.167734$HI.98923@edtnps84...
> on a 4.2L, am I turning counterclockwise to lean the mixture?
>
>

Re: leaning out the 4.2L
 

Is this such a goofy question no one will answer??

"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:URLJe.167734$HI.98923@edtnps84...
> on a 4.2L, am I turning counterclockwise to lean the mixture?
>
>

Re: leaning out the 4.2L
 

Is this such a goofy question no one will answer??

"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:URLJe.167734$HI.98923@edtnps84...
> on a 4.2L, am I turning counterclockwise to lean the mixture?
>
>

Re: leaning out the 4.2L
 

Is this such a goofy question no one will answer??

"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:URLJe.167734$HI.98923@edtnps84...
> on a 4.2L, am I turning counterclockwise to lean the mixture?
>
>

Re: leaning out the 4.2L
 

LOL!

I was busy. Clockwise screws it in which leans it out.

The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.

If it won't lean out, then suspect blocked idle tubes.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >

Re: leaning out the 4.2L
 

LOL!

I was busy. Clockwise screws it in which leans it out.

The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.

If it won't lean out, then suspect blocked idle tubes.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >

Re: leaning out the 4.2L
 

LOL!

I was busy. Clockwise screws it in which leans it out.

The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.

If it won't lean out, then suspect blocked idle tubes.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >

Re: leaning out the 4.2L
 

LOL!

I was busy. Clockwise screws it in which leans it out.

The stepper's pins go all the way into the carb for a full rich on them,
then you fine tune it with the front screws.

If it won't lean out, then suspect blocked idle tubes.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Pi-Eyed Piper wrote:
>
> Is this such a goofy question no one will answer??
>
> "Pi-Eyed Piper" <notta@hello.com> wrote in message
> news:URLJe.167734$HI.98923@edtnps84...
> > on a 4.2L, am I turning counterclockwise to lean the mixture?
> >
> >

Re: leaning out the 4.2L
 

are the mixture screws only for idle mixture?


"Pi-Eyed Piper" <notta@hello.com> wrote in message
news:URLJe.167734$HI.98923@edtnps84...
> on a 4.2L, am I turning counterclockwise to lean the mixture?
>
>