K 551 Weber kit
#41
Guest
Posts: n/a
Re: K 551 Weber kit
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:b3558d23d6c549969503e57901e64de5@CarKB.com...
>I did not take the computer out of the loop. I did leave the vac. advance
> at the manifold and will try moving it. I'll try the computer thingie as
> well. Also, I haven't road tested it much yet, but the comment about it
> using alot of fuel seems to be accurate. Bill, you suggest reconnecting
> the charcoal cannister? I didn't think I would be losing that much for
> vapor, but.....
> I didn't pay much attention to the cannister hose routing when I disabled
> it because I planned on abandoning it. Any suggestions for me on how and
> where to route the three hoses? Also, the vapor line at the top of the
> carb, should that go to the vapor canister? I did disconnect the EGR
> valve
> vacuum line and plugged it.>
The Weber has two vacuum ports, one for the ign advance, the other (further
up the throttle plate travel) can be used for the emissions equipment, incl
the canister. The kit comes with some fittings you can adapt for the PVC
system, too.
Thread
Thread Starter
Forum
Replies
Last Post
JeepGal
Jeep & 4x4 Items For Sale
0
03-07-2012 10:53 PM
Michael Pomeroy
Jeep Mailing List
38
09-19-2003 02:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)