Easiest cheapest way to change to 4.11:1 - Page 8 - Jeeps Canada

06-23-2007, 12:13 AM

#71

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Easiest cheapest way to change to 4.11:1

forwarded to: abuse@mchsi.com, fraud@mchsi.com, fraud@4AX.COM,
abuse@aioe.org, abuse@***.net, abuse@teranews.com
Path:
free.teranews.com!sam.nntpserver.com!be3.nntpserve r.com!10.1.1.100.MISMATCH!
nntpserver.com!zeus.nntpserver.com!news.glorb.com! border1.nntp.dca.giganews.
com!nntp.giganews.com!wns13feed!worldnet.att.net!a ttbi_s21.POSTED!53ab2750!n
ot-for-mail
From: 24Bit®<standing@the.exit>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: Easiest cheapest way to change to 4.11:1
Organization: None
Reply-To: Management@Lunch
Message-ID: <0ajo73djgk32mmlgl6quh31p79dnn96f0m@4ax.com>
References: <4VUei.1$I5.129@news.more.net>
<467c1c49$0$16377$88260bb3@free.teranews.com> <17Wei.3$I5.538@news.more.net>
<467c369f$0$18866$9a6e19ea@unlimited.newshosting.c om>
<467c2fc2$0$19486$88260bb3@free.teranews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 148
X-Complaints-To: abuse@mchsi.com
NNTP-Posting-Date: Fri, 22 Jun 2007 22:32:13 GMT
Date: Fri, 22 Jun 2007 22:32:13 GMT

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:13 AM

#72

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Easiest cheapest way to change to 4.11:1

forwarded to: abuse@mchsi.com, fraud@mchsi.com, fraud@4AX.COM,
abuse@aioe.org, abuse@***.net, abuse@teranews.com
Path:
free.teranews.com!sam.nntpserver.com!be3.nntpserve r.com!10.1.1.100.MISMATCH!
nntpserver.com!zeus.nntpserver.com!news.glorb.com! border1.nntp.dca.giganews.
com!nntp.giganews.com!wns13feed!worldnet.att.net!a ttbi_s21.POSTED!53ab2750!n
ot-for-mail
From: 24Bit®<standing@the.exit>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: Easiest cheapest way to change to 4.11:1
Organization: None
Reply-To: Management@Lunch
Message-ID: <0ajo73djgk32mmlgl6quh31p79dnn96f0m@4ax.com>
References: <4VUei.1$I5.129@news.more.net>
<467c1c49$0$16377$88260bb3@free.teranews.com> <17Wei.3$I5.538@news.more.net>
<467c369f$0$18866$9a6e19ea@unlimited.newshosting.c om>
<467c2fc2$0$19486$88260bb3@free.teranews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 148
X-Complaints-To: abuse@mchsi.com
NNTP-Posting-Date: Fri, 22 Jun 2007 22:32:13 GMT
Date: Fri, 22 Jun 2007 22:32:13 GMT

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:13 AM

#73

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Easiest cheapest way to change to 4.11:1

forwarded to: abuse@mchsi.com, fraud@mchsi.com, fraud@4AX.COM,
abuse@aioe.org, abuse@***.net, abuse@teranews.com
Path:
free.teranews.com!sam.nntpserver.com!be3.nntpserve r.com!10.1.1.100.MISMATCH!
nntpserver.com!zeus.nntpserver.com!news.glorb.com! border1.nntp.dca.giganews.
com!nntp.giganews.com!wns13feed!worldnet.att.net!a ttbi_s21.POSTED!53ab2750!n
ot-for-mail
From: 24Bit®<standing@the.exit>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: Easiest cheapest way to change to 4.11:1
Organization: None
Reply-To: Management@Lunch
Message-ID: <0ajo73djgk32mmlgl6quh31p79dnn96f0m@4ax.com>
References: <4VUei.1$I5.129@news.more.net>
<467c1c49$0$16377$88260bb3@free.teranews.com> <17Wei.3$I5.538@news.more.net>
<467c369f$0$18866$9a6e19ea@unlimited.newshosting.c om>
<467c2fc2$0$19486$88260bb3@free.teranews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 148
X-Complaints-To: abuse@mchsi.com
NNTP-Posting-Date: Fri, 22 Jun 2007 22:32:13 GMT
Date: Fri, 22 Jun 2007 22:32:13 GMT

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:22 AM

#74

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Re: Easiest cheapest way to change to 4.11:1

And who are you, you haven't shown me sh*t! Other than a f*cked up head
conversion I wouldn't wish on my worst enemy:
http://www.----------.com/temp/bill_is_wrong.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

"SnoMan" <admin@snoman.com> wrote in message
news:vhno73971d08vneft19q0o4ftbcbqro4gl@4ax.com...
>
> Words of wisdom from idiot. He gets by because one, he does not know
> how to change a differ cover gasket let alone a gear set and two he
> has very low standards and a really big ego.
> >
> >Been doing this for 10 years or so in my C7. I don't crawl rocks on the
> >trails I run so pretty much never even need first low.
>
> In 10 years you have not learned a thing obviously. If your knowledge
> was half as big as your ego you might know something.
>
>
> If the OP has a 02 with 4 inch lift and 33's, I would suggest a 4.56
> if you have a stick which would be a NV3550 and it would play well
> together. One thing you would do well to consider in that the rear
> axle for a Ford explorer built from about 95 to 2002 is a darn near
> bolt in and it is considerably stronger than your D35. The ford 8.8
> has no carrier break so the money you save on not buying a carrier
> could go for axle and you might get lucky to and find a exploer 8.8
> with a 4.1 in it if you stick with that gear and get a much stronger
> rear axle. I am not a ford fan but the 8.8 is a pretty good rear end
> for what it is and a lot better than a D35 and arguably better than a
> D44 too.
> -----------------
> TheSnoMan.com

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:22 AM

#75

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Re: Easiest cheapest way to change to 4.11:1

And who are you, you haven't shown me sh*t! Other than a f*cked up head
conversion I wouldn't wish on my worst enemy:
http://www.----------.com/temp/bill_is_wrong.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

"SnoMan" <admin@snoman.com> wrote in message
news:vhno73971d08vneft19q0o4ftbcbqro4gl@4ax.com...
>
> Words of wisdom from idiot. He gets by because one, he does not know
> how to change a differ cover gasket let alone a gear set and two he
> has very low standards and a really big ego.
> >
> >Been doing this for 10 years or so in my C7. I don't crawl rocks on the
> >trails I run so pretty much never even need first low.
>
> In 10 years you have not learned a thing obviously. If your knowledge
> was half as big as your ego you might know something.
>
>
> If the OP has a 02 with 4 inch lift and 33's, I would suggest a 4.56
> if you have a stick which would be a NV3550 and it would play well
> together. One thing you would do well to consider in that the rear
> axle for a Ford explorer built from about 95 to 2002 is a darn near
> bolt in and it is considerably stronger than your D35. The ford 8.8
> has no carrier break so the money you save on not buying a carrier
> could go for axle and you might get lucky to and find a exploer 8.8
> with a 4.1 in it if you stick with that gear and get a much stronger
> rear axle. I am not a ford fan but the 8.8 is a pretty good rear end
> for what it is and a lot better than a D35 and arguably better than a
> D44 too.
> -----------------
> TheSnoMan.com

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:22 AM

#76

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Re: Easiest cheapest way to change to 4.11:1

And who are you, you haven't shown me sh*t! Other than a f*cked up head
conversion I wouldn't wish on my worst enemy:
http://www.----------.com/temp/bill_is_wrong.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

"SnoMan" <admin@snoman.com> wrote in message
news:vhno73971d08vneft19q0o4ftbcbqro4gl@4ax.com...
>
> Words of wisdom from idiot. He gets by because one, he does not know
> how to change a differ cover gasket let alone a gear set and two he
> has very low standards and a really big ego.
> >
> >Been doing this for 10 years or so in my C7. I don't crawl rocks on the
> >trails I run so pretty much never even need first low.
>
> In 10 years you have not learned a thing obviously. If your knowledge
> was half as big as your ego you might know something.
>
>
> If the OP has a 02 with 4 inch lift and 33's, I would suggest a 4.56
> if you have a stick which would be a NV3550 and it would play well
> together. One thing you would do well to consider in that the rear
> axle for a Ford explorer built from about 95 to 2002 is a darn near
> bolt in and it is considerably stronger than your D35. The ford 8.8
> has no carrier break so the money you save on not buying a carrier
> could go for axle and you might get lucky to and find a exploer 8.8
> with a 4.1 in it if you stick with that gear and get a much stronger
> rear axle. I am not a ford fan but the 8.8 is a pretty good rear end
> for what it is and a lot better than a D35 and arguably better than a
> D44 too.
> -----------------
> TheSnoMan.com

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:22 AM

#77

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Re: Easiest cheapest way to change to 4.11:1

And who are you, you haven't shown me sh*t! Other than a f*cked up head
conversion I wouldn't wish on my worst enemy:
http://www.----------.com/temp/bill_is_wrong.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

"SnoMan" <admin@snoman.com> wrote in message
news:vhno73971d08vneft19q0o4ftbcbqro4gl@4ax.com...
>
> Words of wisdom from idiot. He gets by because one, he does not know
> how to change a differ cover gasket let alone a gear set and two he
> has very low standards and a really big ego.
> >
> >Been doing this for 10 years or so in my C7. I don't crawl rocks on the
> >trails I run so pretty much never even need first low.
>
> In 10 years you have not learned a thing obviously. If your knowledge
> was half as big as your ego you might know something.
>
>
> If the OP has a 02 with 4 inch lift and 33's, I would suggest a 4.56
> if you have a stick which would be a NV3550 and it would play well
> together. One thing you would do well to consider in that the rear
> axle for a Ford explorer built from about 95 to 2002 is a darn near
> bolt in and it is considerably stronger than your D35. The ford 8.8
> has no carrier break so the money you save on not buying a carrier
> could go for axle and you might get lucky to and find a exploer 8.8
> with a 4.1 in it if you stick with that gear and get a much stronger
> rear axle. I am not a ford fan but the 8.8 is a pretty good rear end
> for what it is and a lot better than a D35 and arguably better than a
> D44 too.
> -----------------
> TheSnoMan.com

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:24 AM

#78

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Easiest cheapest way to change to 4.11:1

forwarded to: abuse@mchsi.com, fraud@mchsi.com, fraud@4AX.COM,
abuse@aioe.org, abuse@***.net, abuse@teranews.com
Path:
free.teranews.com!sam.nntpserver.com!nntpserver.co m!zeus.nntpserver.com!news
..glorb.com!border1.nntp.dca.giganews.com!nntp.gig anews.com!wns13feed!worldne
t.att.net!attbi_s21.POSTED!53ab2750!not-for-mail
From: 24Bit®<standing@the.exit>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: Easiest cheapest way to change to 4.11:1
Organization: None
Reply-To: Management@Lunch
Message-ID: <h8jo73hdlau292036j9t73tlt30bmhu2j5@4ax.com>
References: <4VUei.1$I5.129@news.more.net>
<467c1c49$0$16377$88260bb3@free.teranews.com> <17Wei.3$I5.538@news.more.net>
<467c2d67$0$16347$88260bb3@free.teranews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 150
X-Complaints-To: abuse@mchsi.com
NNTP-Posting-Date: Fri, 22 Jun 2007 22:32:14 GMT
Date: Fri, 22 Jun 2007 22:32:14 GMT

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:24 AM

#79

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Easiest cheapest way to change to 4.11:1

forwarded to: abuse@mchsi.com, fraud@mchsi.com, fraud@4AX.COM,
abuse@aioe.org, abuse@***.net, abuse@teranews.com
Path:
free.teranews.com!sam.nntpserver.com!nntpserver.co m!zeus.nntpserver.com!news
..glorb.com!border1.nntp.dca.giganews.com!nntp.gig anews.com!wns13feed!worldne
t.att.net!attbi_s21.POSTED!53ab2750!not-for-mail
From: 24Bit®<standing@the.exit>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: Easiest cheapest way to change to 4.11:1
Organization: None
Reply-To: Management@Lunch
Message-ID: <h8jo73hdlau292036j9t73tlt30bmhu2j5@4ax.com>
References: <4VUei.1$I5.129@news.more.net>
<467c1c49$0$16377$88260bb3@free.teranews.com> <17Wei.3$I5.538@news.more.net>
<467c2d67$0$16347$88260bb3@free.teranews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 150
X-Complaints-To: abuse@mchsi.com
NNTP-Posting-Date: Fri, 22 Jun 2007 22:32:14 GMT
Date: Fri, 22 Jun 2007 22:32:14 GMT

--
Posted via a free Usenet account from http://www.teranews.com

Reply

06-23-2007, 12:24 AM

#80

L.W. $Bill$ Hughes III

Guest

Posts: n/a

Re: Easiest cheapest way to change to 4.11:1

forwarded to: abuse@mchsi.com, fraud@mchsi.com, fraud@4AX.COM,
abuse@aioe.org, abuse@***.net, abuse@teranews.com
Path:
free.teranews.com!sam.nntpserver.com!nntpserver.co m!zeus.nntpserver.com!news
..glorb.com!border1.nntp.dca.giganews.com!nntp.gig anews.com!wns13feed!worldne
t.att.net!attbi_s21.POSTED!53ab2750!not-for-mail
From: 24Bit®<standing@the.exit>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: Easiest cheapest way to change to 4.11:1
Organization: None
Reply-To: Management@Lunch
Message-ID: <h8jo73hdlau292036j9t73tlt30bmhu2j5@4ax.com>
References: <4VUei.1$I5.129@news.more.net>
<467c1c49$0$16377$88260bb3@free.teranews.com> <17Wei.3$I5.538@news.more.net>
<467c2d67$0$16347$88260bb3@free.teranews.com>
X-Newsreader: Forte Agent 4.2/32.1118
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 150
X-Complaints-To: abuse@mchsi.com
NNTP-Posting-Date: Fri, 22 Jun 2007 22:32:14 GMT
Date: Fri, 22 Jun 2007 22:32:14 GMT

--
Posted via a free Usenet account from http://www.teranews.com

Reply