Discovered Bore
02-26-2004, 10:44 PM
#21
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#22
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#23
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#24
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#25
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#26
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#27
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:44 PM
#28
Guest
Posts: n/a
Re: Discovered Bore
Have any local recomendations (who can pull old and install rebuilt)?
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
"Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
news:20040226223451.26484.00000469@mb-m20.aol.com...
> >He told me Blow By was going on and I needed a new engine.
> >
>
> With your overbore, sounds like your current block is worn out. Blocks
don't
> last forever. If you try to re-ring just one piston and replace a few
bearings
> you are accomplishing nothing but a short-term band-aid. It's time to buy
a
> rebuilt motor.
>
> Be sure to get it from a reputable company with a good warranty, even if
it
> costs a few dollars more. Otherwise, you are asking for heartache in the
> future.
>
> Robert Bills
> KG6LMV
> Orange County CA
>
> http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> http://www.RobertBills.com
02-26-2004, 10:45 PM
#29
Guest
Posts: n/a
Re: Discovered Bore
Sorry about the multiple posts. My newsreader or isp......
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1meif$1k586b$2@ID-193866.news.uni-berlin.de...
> Have any local recomendations (who can pull old and install rebuilt)?
>
>
> "Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
> news:20040226223451.26484.00000469@mb-m20.aol.com...
> > >He told me Blow By was going on and I needed a new engine.
> > >
> >
> > With your overbore, sounds like your current block is worn out. Blocks
> don't
> > last forever. If you try to re-ring just one piston and replace a few
> bearings
> > you are accomplishing nothing but a short-term band-aid. It's time to
buy
> a
> > rebuilt motor.
> >
> > Be sure to get it from a reputable company with a good warranty, even if
> it
> > costs a few dollars more. Otherwise, you are asking for heartache in
the
> > future.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
>
>
>
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1meif$1k586b$2@ID-193866.news.uni-berlin.de...
> Have any local recomendations (who can pull old and install rebuilt)?
>
>
> "Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
> news:20040226223451.26484.00000469@mb-m20.aol.com...
> > >He told me Blow By was going on and I needed a new engine.
> > >
> >
> > With your overbore, sounds like your current block is worn out. Blocks
> don't
> > last forever. If you try to re-ring just one piston and replace a few
> bearings
> > you are accomplishing nothing but a short-term band-aid. It's time to
buy
> a
> > rebuilt motor.
> >
> > Be sure to get it from a reputable company with a good warranty, even if
> it
> > costs a few dollars more. Otherwise, you are asking for heartache in
the
> > future.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
>
>
>
02-26-2004, 10:45 PM
#30
Guest
Posts: n/a
Re: Discovered Bore
Sorry about the multiple posts. My newsreader or isp......
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1meif$1k586b$2@ID-193866.news.uni-berlin.de...
> Have any local recomendations (who can pull old and install rebuilt)?
>
>
> "Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
> news:20040226223451.26484.00000469@mb-m20.aol.com...
> > >He told me Blow By was going on and I needed a new engine.
> > >
> >
> > With your overbore, sounds like your current block is worn out. Blocks
> don't
> > last forever. If you try to re-ring just one piston and replace a few
> bearings
> > you are accomplishing nothing but a short-term band-aid. It's time to
buy
> a
> > rebuilt motor.
> >
> > Be sure to get it from a reputable company with a good warranty, even if
> it
> > costs a few dollars more. Otherwise, you are asking for heartache in
the
> > future.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
>
>
>
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:c1meif$1k586b$2@ID-193866.news.uni-berlin.de...
> Have any local recomendations (who can pull old and install rebuilt)?
>
>
> "Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
> news:20040226223451.26484.00000469@mb-m20.aol.com...
> > >He told me Blow By was going on and I needed a new engine.
> > >
> >
> > With your overbore, sounds like your current block is worn out. Blocks
> don't
> > last forever. If you try to re-ring just one piston and replace a few
> bearings
> > you are accomplishing nothing but a short-term band-aid. It's time to
buy
> a
> > rebuilt motor.
> >
> > Be sure to get it from a reputable company with a good warranty, even if
> it
> > costs a few dollars more. Otherwise, you are asking for heartache in
the
> > future.
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com
>
>
>
