Coverting YJ fro MAnual to Automatic
04-30-2005, 02:54 AM
#101
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> i think in the end it would be worth it. if i were doing a v8 conversion id
> make a 700r4 fit but running the |6 id do the aw4.
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> i think in the end it would be worth it. if i were doing a v8 conversion id
> make a 700r4 fit but running the |6 id do the aw4.
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
04-30-2005, 10:25 AM
#102
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
04-30-2005, 10:25 AM
#103
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
04-30-2005, 10:25 AM
#104
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
04-30-2005, 10:25 AM
#105
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
04-30-2005, 03:21 PM
#106
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
04-30-2005, 03:21 PM
#107
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
04-30-2005, 03:21 PM
#108
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
04-30-2005, 03:21 PM
#109
Guest
Posts: n/a
Re: Coverting YJ fro MAnual to Automatic
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
Thread
Thread Starter
Forum
Replies
Last Post
christopherwshea@gmail.com
Jeep Mailing List
0
08-19-2007 02:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)