Coverting YJ fro MAnual to Automatic
Guest
Posts: n/a
http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> i think in the end it would be worth it. if i were doing a v8 conversion id
> make a 700r4 fit but running the |6 id do the aw4.
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Nathan W. Collier" wrote:
>
> i think in the end it would be worth it. if i were doing a v8 conversion id
> make a 700r4 fit but running the |6 id do the aw4.
>
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
Guest
Posts: n/a
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Guest
Posts: n/a
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Guest
Posts: n/a
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Guest
Posts: n/a
Thanks, Bill, lots of good information, including the fact he used an
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Atlass II with the 231 bolt pattern, which is what I'd be doing.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42732B8D.6B960245@***.net...
> http://www.4x4wire.com/jeep/tech/trans/yj700r4p2/
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "Nathan W. Collier" wrote:
>>
>> i think in the end it would be worth it. if i were doing a v8 conversion
>> id
>> make a 700r4 fit but running the |6 id do the aw4.
>>
>> --
>> Nathan W. Collier
>> http://7SlotGrille.com
>> http://UtilityOffRoad.com
Guest
Posts: n/a
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
Guest
Posts: n/a
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
Guest
Posts: n/a
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
Guest
Posts: n/a
Just in case some here confuse the Real geared Atlas II:
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
http://www.explorer4x4.com/atlas_2.html with the puny NV231 and
motorcycle primary chain.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
SoK66 wrote:
>
> Thanks, Bill, lots of good information, including the fact he used an
> Atlass II with the 231 bolt pattern, which is what I'd be doing.
Thread
Thread Starter
Forum
Replies
Last Post
christopherwshea@gmail.com
Jeep Mailing List
0
Aug 19, 2007 02:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



