achilles heel clutch hydraulics AGAIN...
03-16-2006, 04:00 AM
#51
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Have been going through the same thing with my 87 2.5. Every year I have
proublems. The clutch just went out today. So this weekend I'll go at
it. Not sure what to start with first.
Jeeps ya gotta luv-um
Later Mike
proublems. The clutch just went out today. So this weekend I'll go at
it. Not sure what to start with first.
Jeeps ya gotta luv-um
Later Mike
03-16-2006, 04:00 AM
#52
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Have been going through the same thing with my 87 2.5. Every year I have
proublems. The clutch just went out today. So this weekend I'll go at
it. Not sure what to start with first.
Jeeps ya gotta luv-um
Later Mike
proublems. The clutch just went out today. So this weekend I'll go at
it. Not sure what to start with first.
Jeeps ya gotta luv-um
Later Mike
03-16-2006, 04:00 AM
#53
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Have been going through the same thing with my 87 2.5. Every year I have
proublems. The clutch just went out today. So this weekend I'll go at
it. Not sure what to start with first.
Jeeps ya gotta luv-um
Later Mike
proublems. The clutch just went out today. So this weekend I'll go at
it. Not sure what to start with first.
Jeeps ya gotta luv-um
Later Mike
03-16-2006, 09:40 AM
#54
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Advance Adapters used to have a heavy duty replacement for the slave
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
03-16-2006, 09:40 AM
#55
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Advance Adapters used to have a heavy duty replacement for the slave
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
03-16-2006, 09:40 AM
#56
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Advance Adapters used to have a heavy duty replacement for the slave
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
03-16-2006, 09:40 AM
#57
Guest
Posts: n/a
Re: achilles heel clutch hydraulics AGAIN...
Advance Adapters used to have a heavy duty replacement for the slave
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
cylinder. They are at http://advanceadapters.com . I don't know whether
they still make the part, but one of their sales persons can tell you.
The bell housing and slave setup from a 1994 or newer vehicle seems to be
the better solution. If you are looking for parts on the Internet,
http://www.gemini-sales.com/ is a pretty good site. I just checked to see
it they were still there, and wound up buying the half door window grommets
I have been needing for some time now.
Earle
"Mike chambers" <MikeChambers@webtv.net> wrote in message
news:8838-44192935-1705@storefull-3113.bay.webtv.net...
> Have been going through the same thing with my 87 2.5. Every year I have
> proublems. The clutch just went out today. So this weekend I'll go at
> it. Not sure what to start with first.
> Jeeps ya gotta luv-um
>
> Later Mike
>
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
