XJ T-Case Drop Kit
Guest
Posts: n/a
Re: PICTURE ATTACHED (dont say I din't warn ya)
Sure.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeepster wrote:
>
> I'll place that link on my page if you don't mind.... don't laugh I'm
> still working on it as I get time. (I have a lot to do yet and some of
> the page links don't work ...... )
>
> http://clubweb.interbaun.com/kb57/jeep/index.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeepster wrote:
>
> I'll place that link on my page if you don't mind.... don't laugh I'm
> still working on it as I get time. (I have a lot to do yet and some of
> the page links don't work ...... )
>
> http://clubweb.interbaun.com/kb57/jeep/index.htm
Guest
Posts: n/a
Re: XJ T-Case Drop Kit
Just a sugestion, . If you are lucky enough to own a lathe, or know some one
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
Guest
Posts: n/a
Re: XJ T-Case Drop Kit
Just a sugestion, . If you are lucky enough to own a lathe, or know some one
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
Guest
Posts: n/a
Re: XJ T-Case Drop Kit
Just a sugestion, . If you are lucky enough to own a lathe, or know some one
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
Guest
Posts: n/a
Re: XJ T-Case Drop Kit
Just a sugestion, . If you are lucky enough to own a lathe, or know some one
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
with one, why not take a piece of bar stock, drill and tap one end to screw
on the stud and turn and thread the other end? seems easier to let sleeping
studs lie...
Mike
">
> Does anyone have any ideas??
>
Thread
Thread Starter
Forum
Replies
Last Post
JeepGal
Jeep & 4x4 Items For Sale
0
Mar 7, 2012 10:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
