Would this be safe?
Guest
Posts: n/a
Re: Would this be safe?
"travis" <travist34removethis@hotmail.com> wrote in message
news:liv5qv815k0jn5ndvrd0ijikmm0srlmng1@4ax.com...
> On Fri, 31 Oct 2003 23:13:20 GMT, "Larry St. Regis"
> <lstregis@DONT_SPAM_HEREi4putt.com> shared the following:
>
> >"travis" <travist34removethis@hotmail.com> wrote in message
> >news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com.. .
> >> Just as a temporary thing I was toying with the idea of putting some
> >> fiberglass insulation in my glasspack mufflers to help deaden the
> >> sound a little... Would that be safe? Isn't there already fiberglass
> >> packing in the very small surrounding chamber on these mufflers? I'd
> >> be worried that the heat from the exhuast might actually catch the
> >> fiberglass on fire. Could that happen? I know this isn't an ideal or
> >> permanent solution but it would be nice to just quieten these
> >> glasspacks down just a little bit before I pick up some turbo
> >> mufflers. Thank you.
> >>
> >
> >Travis,
> >
> >Aside from what everyone has said about needing tailpipes, you CAN go to
any
> >decent sized motorcycle shop and get muffler re-packing material. It's
used
> >by motorcyclists all the time.
> >
> >Larry
> >
>
> Hmmm... There are 2 motorcycle shops nearby. I may have to check
> that out. Thanks, Larry.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Travis,
This probably wont make as much difference as you want, but a set of
turndowns on the ends of the mufflers will help some, and you won't lose any
ground clearance either.
Chris
Guest
Posts: n/a
Re: Would this be safe?
"travis" <travist34removethis@hotmail.com> wrote in message
news:liv5qv815k0jn5ndvrd0ijikmm0srlmng1@4ax.com...
> On Fri, 31 Oct 2003 23:13:20 GMT, "Larry St. Regis"
> <lstregis@DONT_SPAM_HEREi4putt.com> shared the following:
>
> >"travis" <travist34removethis@hotmail.com> wrote in message
> >news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com.. .
> >> Just as a temporary thing I was toying with the idea of putting some
> >> fiberglass insulation in my glasspack mufflers to help deaden the
> >> sound a little... Would that be safe? Isn't there already fiberglass
> >> packing in the very small surrounding chamber on these mufflers? I'd
> >> be worried that the heat from the exhuast might actually catch the
> >> fiberglass on fire. Could that happen? I know this isn't an ideal or
> >> permanent solution but it would be nice to just quieten these
> >> glasspacks down just a little bit before I pick up some turbo
> >> mufflers. Thank you.
> >>
> >
> >Travis,
> >
> >Aside from what everyone has said about needing tailpipes, you CAN go to
any
> >decent sized motorcycle shop and get muffler re-packing material. It's
used
> >by motorcyclists all the time.
> >
> >Larry
> >
>
> Hmmm... There are 2 motorcycle shops nearby. I may have to check
> that out. Thanks, Larry.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Travis,
This probably wont make as much difference as you want, but a set of
turndowns on the ends of the mufflers will help some, and you won't lose any
ground clearance either.
Chris
Guest
Posts: n/a
Re: Would this be safe?
I would go to a local muffler shop and have them make me tailpipes.
They could run along the frame and have the up loop to clear the rear
axle tucked in the wheel well.
I don't know about the laws where you are, but here, you are not allowed
to have an exhaust system exit under the passenger compartment or in
front of the rear wheel. The wheel will vortex the exhaust and you will
get fumes big time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
They could run along the frame and have the up loop to clear the rear
axle tucked in the wheel well.
I don't know about the laws where you are, but here, you are not allowed
to have an exhaust system exit under the passenger compartment or in
front of the rear wheel. The wheel will vortex the exhaust and you will
get fumes big time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
Guest
Posts: n/a
Re: Would this be safe?
I would go to a local muffler shop and have them make me tailpipes.
They could run along the frame and have the up loop to clear the rear
axle tucked in the wheel well.
I don't know about the laws where you are, but here, you are not allowed
to have an exhaust system exit under the passenger compartment or in
front of the rear wheel. The wheel will vortex the exhaust and you will
get fumes big time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
They could run along the frame and have the up loop to clear the rear
axle tucked in the wheel well.
I don't know about the laws where you are, but here, you are not allowed
to have an exhaust system exit under the passenger compartment or in
front of the rear wheel. The wheel will vortex the exhaust and you will
get fumes big time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
Guest
Posts: n/a
Re: Would this be safe?
I would go to a local muffler shop and have them make me tailpipes.
They could run along the frame and have the up loop to clear the rear
axle tucked in the wheel well.
I don't know about the laws where you are, but here, you are not allowed
to have an exhaust system exit under the passenger compartment or in
front of the rear wheel. The wheel will vortex the exhaust and you will
get fumes big time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
They could run along the frame and have the up loop to clear the rear
axle tucked in the wheel well.
I don't know about the laws where you are, but here, you are not allowed
to have an exhaust system exit under the passenger compartment or in
front of the rear wheel. The wheel will vortex the exhaust and you will
get fumes big time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
Guest
Posts: n/a
Re: Would this be safe?
My muffler shop had his own bending machine, and he tucked my pipe between
the skid plate and the floor, inside the frame rails. He made some bends
that routed the pipe over the axle and out the back between the spring and
the gas tank.
"travis" <travist34removethis@hotmail.com> wrote in message
news:1fv5qvo16l6c95mvvoi0h4t4t0puji9amo@4ax.com...
> On Fri, 31 Oct 2003 14:43:35 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >Nevermind, I read somewhere else that you do not have tail pipes. If you
get
> >new mufflers ans still have no tail pipes, you won't be happy. You need
tail
> >pipes so the mufflers will not be so noisy.
> >
> >I run a header with a MagnaFlow muffler and a tail pipe that goes over
the
> >axle and out the back, and the sound is very nice. Before the tail pipe
> >went on, it was way too loud. You might object to the noise with the
glass
> >packs and tail pipes, but getting a good muffler and still no tail pipes
> >won't be much of an improvement.
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
> >
> >
> >
> >
> >"CRWLR" <beerman@yahoo.com> wrote in message
> >news:vq5orfbrloh923@corp.supernews.com...
> >> Do you have tail pipes behind those glass packs?
> >>
> >>
> >>
> >>
> >>
> >> "travis" <travist34removethis@hotmail.com> wrote in message
> >> news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com...
> >> > Just as a temporary thing I was toying with the idea of putting some
> >> > fiberglass insulation in my glasspack mufflers to help deaden the
> >> > sound a little... Would that be safe? Isn't there already
fiberglass
> >> > packing in the very small surrounding chamber on these mufflers? I'd
> >> > be worried that the heat from the exhuast might actually catch the
> >> > fiberglass on fire. Could that happen? I know this isn't an ideal
or
> >> > permanent solution but it would be nice to just quieten these
> >> > glasspacks down just a little bit before I pick up some turbo
> >> > mufflers. Thank you.
> >> >
> >> >
> >> >
> >> > --
> >> > Travis
> >> > http://jeepadventures.dyndns.org/jeep.html
> >> > The meek shall inherit the earth. After I'm finished with it.
> >> > :wq!
> >>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
the skid plate and the floor, inside the frame rails. He made some bends
that routed the pipe over the axle and out the back between the spring and
the gas tank.
"travis" <travist34removethis@hotmail.com> wrote in message
news:1fv5qvo16l6c95mvvoi0h4t4t0puji9amo@4ax.com...
> On Fri, 31 Oct 2003 14:43:35 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >Nevermind, I read somewhere else that you do not have tail pipes. If you
get
> >new mufflers ans still have no tail pipes, you won't be happy. You need
tail
> >pipes so the mufflers will not be so noisy.
> >
> >I run a header with a MagnaFlow muffler and a tail pipe that goes over
the
> >axle and out the back, and the sound is very nice. Before the tail pipe
> >went on, it was way too loud. You might object to the noise with the
glass
> >packs and tail pipes, but getting a good muffler and still no tail pipes
> >won't be much of an improvement.
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
> >
> >
> >
> >
> >"CRWLR" <beerman@yahoo.com> wrote in message
> >news:vq5orfbrloh923@corp.supernews.com...
> >> Do you have tail pipes behind those glass packs?
> >>
> >>
> >>
> >>
> >>
> >> "travis" <travist34removethis@hotmail.com> wrote in message
> >> news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com...
> >> > Just as a temporary thing I was toying with the idea of putting some
> >> > fiberglass insulation in my glasspack mufflers to help deaden the
> >> > sound a little... Would that be safe? Isn't there already
fiberglass
> >> > packing in the very small surrounding chamber on these mufflers? I'd
> >> > be worried that the heat from the exhuast might actually catch the
> >> > fiberglass on fire. Could that happen? I know this isn't an ideal
or
> >> > permanent solution but it would be nice to just quieten these
> >> > glasspacks down just a little bit before I pick up some turbo
> >> > mufflers. Thank you.
> >> >
> >> >
> >> >
> >> > --
> >> > Travis
> >> > http://jeepadventures.dyndns.org/jeep.html
> >> > The meek shall inherit the earth. After I'm finished with it.
> >> > :wq!
> >>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Guest
Posts: n/a
Re: Would this be safe?
My muffler shop had his own bending machine, and he tucked my pipe between
the skid plate and the floor, inside the frame rails. He made some bends
that routed the pipe over the axle and out the back between the spring and
the gas tank.
"travis" <travist34removethis@hotmail.com> wrote in message
news:1fv5qvo16l6c95mvvoi0h4t4t0puji9amo@4ax.com...
> On Fri, 31 Oct 2003 14:43:35 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >Nevermind, I read somewhere else that you do not have tail pipes. If you
get
> >new mufflers ans still have no tail pipes, you won't be happy. You need
tail
> >pipes so the mufflers will not be so noisy.
> >
> >I run a header with a MagnaFlow muffler and a tail pipe that goes over
the
> >axle and out the back, and the sound is very nice. Before the tail pipe
> >went on, it was way too loud. You might object to the noise with the
glass
> >packs and tail pipes, but getting a good muffler and still no tail pipes
> >won't be much of an improvement.
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
> >
> >
> >
> >
> >"CRWLR" <beerman@yahoo.com> wrote in message
> >news:vq5orfbrloh923@corp.supernews.com...
> >> Do you have tail pipes behind those glass packs?
> >>
> >>
> >>
> >>
> >>
> >> "travis" <travist34removethis@hotmail.com> wrote in message
> >> news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com...
> >> > Just as a temporary thing I was toying with the idea of putting some
> >> > fiberglass insulation in my glasspack mufflers to help deaden the
> >> > sound a little... Would that be safe? Isn't there already
fiberglass
> >> > packing in the very small surrounding chamber on these mufflers? I'd
> >> > be worried that the heat from the exhuast might actually catch the
> >> > fiberglass on fire. Could that happen? I know this isn't an ideal
or
> >> > permanent solution but it would be nice to just quieten these
> >> > glasspacks down just a little bit before I pick up some turbo
> >> > mufflers. Thank you.
> >> >
> >> >
> >> >
> >> > --
> >> > Travis
> >> > http://jeepadventures.dyndns.org/jeep.html
> >> > The meek shall inherit the earth. After I'm finished with it.
> >> > :wq!
> >>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
the skid plate and the floor, inside the frame rails. He made some bends
that routed the pipe over the axle and out the back between the spring and
the gas tank.
"travis" <travist34removethis@hotmail.com> wrote in message
news:1fv5qvo16l6c95mvvoi0h4t4t0puji9amo@4ax.com...
> On Fri, 31 Oct 2003 14:43:35 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >Nevermind, I read somewhere else that you do not have tail pipes. If you
get
> >new mufflers ans still have no tail pipes, you won't be happy. You need
tail
> >pipes so the mufflers will not be so noisy.
> >
> >I run a header with a MagnaFlow muffler and a tail pipe that goes over
the
> >axle and out the back, and the sound is very nice. Before the tail pipe
> >went on, it was way too loud. You might object to the noise with the
glass
> >packs and tail pipes, but getting a good muffler and still no tail pipes
> >won't be much of an improvement.
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
> >
> >
> >
> >
> >"CRWLR" <beerman@yahoo.com> wrote in message
> >news:vq5orfbrloh923@corp.supernews.com...
> >> Do you have tail pipes behind those glass packs?
> >>
> >>
> >>
> >>
> >>
> >> "travis" <travist34removethis@hotmail.com> wrote in message
> >> news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com...
> >> > Just as a temporary thing I was toying with the idea of putting some
> >> > fiberglass insulation in my glasspack mufflers to help deaden the
> >> > sound a little... Would that be safe? Isn't there already
fiberglass
> >> > packing in the very small surrounding chamber on these mufflers? I'd
> >> > be worried that the heat from the exhuast might actually catch the
> >> > fiberglass on fire. Could that happen? I know this isn't an ideal
or
> >> > permanent solution but it would be nice to just quieten these
> >> > glasspacks down just a little bit before I pick up some turbo
> >> > mufflers. Thank you.
> >> >
> >> >
> >> >
> >> > --
> >> > Travis
> >> > http://jeepadventures.dyndns.org/jeep.html
> >> > The meek shall inherit the earth. After I'm finished with it.
> >> > :wq!
> >>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Guest
Posts: n/a
Re: Would this be safe?
My muffler shop had his own bending machine, and he tucked my pipe between
the skid plate and the floor, inside the frame rails. He made some bends
that routed the pipe over the axle and out the back between the spring and
the gas tank.
"travis" <travist34removethis@hotmail.com> wrote in message
news:1fv5qvo16l6c95mvvoi0h4t4t0puji9amo@4ax.com...
> On Fri, 31 Oct 2003 14:43:35 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >Nevermind, I read somewhere else that you do not have tail pipes. If you
get
> >new mufflers ans still have no tail pipes, you won't be happy. You need
tail
> >pipes so the mufflers will not be so noisy.
> >
> >I run a header with a MagnaFlow muffler and a tail pipe that goes over
the
> >axle and out the back, and the sound is very nice. Before the tail pipe
> >went on, it was way too loud. You might object to the noise with the
glass
> >packs and tail pipes, but getting a good muffler and still no tail pipes
> >won't be much of an improvement.
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
> >
> >
> >
> >
> >"CRWLR" <beerman@yahoo.com> wrote in message
> >news:vq5orfbrloh923@corp.supernews.com...
> >> Do you have tail pipes behind those glass packs?
> >>
> >>
> >>
> >>
> >>
> >> "travis" <travist34removethis@hotmail.com> wrote in message
> >> news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com...
> >> > Just as a temporary thing I was toying with the idea of putting some
> >> > fiberglass insulation in my glasspack mufflers to help deaden the
> >> > sound a little... Would that be safe? Isn't there already
fiberglass
> >> > packing in the very small surrounding chamber on these mufflers? I'd
> >> > be worried that the heat from the exhuast might actually catch the
> >> > fiberglass on fire. Could that happen? I know this isn't an ideal
or
> >> > permanent solution but it would be nice to just quieten these
> >> > glasspacks down just a little bit before I pick up some turbo
> >> > mufflers. Thank you.
> >> >
> >> >
> >> >
> >> > --
> >> > Travis
> >> > http://jeepadventures.dyndns.org/jeep.html
> >> > The meek shall inherit the earth. After I'm finished with it.
> >> > :wq!
> >>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
the skid plate and the floor, inside the frame rails. He made some bends
that routed the pipe over the axle and out the back between the spring and
the gas tank.
"travis" <travist34removethis@hotmail.com> wrote in message
news:1fv5qvo16l6c95mvvoi0h4t4t0puji9amo@4ax.com...
> On Fri, 31 Oct 2003 14:43:35 -0800, "CRWLR" <beerman@yahoo.com>
> shared the following:
>
> >Nevermind, I read somewhere else that you do not have tail pipes. If you
get
> >new mufflers ans still have no tail pipes, you won't be happy. You need
tail
> >pipes so the mufflers will not be so noisy.
> >
> >I run a header with a MagnaFlow muffler and a tail pipe that goes over
the
> >axle and out the back, and the sound is very nice. Before the tail pipe
> >went on, it was way too loud. You might object to the noise with the
glass
> >packs and tail pipes, but getting a good muffler and still no tail pipes
> >won't be much of an improvement.
>
> But how do I fit a tailpipe to it? The headers exit on the outside of
> the frame. I'd have to run the tailpipe under the frame and lose GOBS
> of ground clearance. There's just no room for tailpipes if I put
> attach any kind of mufflers to the headers. See this picture?
> http://jeepadventures.dyndns.org/jeep/exhaust/07.jpg
> I could put about a 3" long tailpipe there and that's it. See what I
> mean?
>
> >
> >
> >
> >
> >"CRWLR" <beerman@yahoo.com> wrote in message
> >news:vq5orfbrloh923@corp.supernews.com...
> >> Do you have tail pipes behind those glass packs?
> >>
> >>
> >>
> >>
> >>
> >> "travis" <travist34removethis@hotmail.com> wrote in message
> >> news:apn5qvops3une0o73veuvbg22ddro9eg91@4ax.com...
> >> > Just as a temporary thing I was toying with the idea of putting some
> >> > fiberglass insulation in my glasspack mufflers to help deaden the
> >> > sound a little... Would that be safe? Isn't there already
fiberglass
> >> > packing in the very small surrounding chamber on these mufflers? I'd
> >> > be worried that the heat from the exhuast might actually catch the
> >> > fiberglass on fire. Could that happen? I know this isn't an ideal
or
> >> > permanent solution but it would be nice to just quieten these
> >> > glasspacks down just a little bit before I pick up some turbo
> >> > mufflers. Thank you.
> >> >
> >> >
> >> >
> >> > --
> >> > Travis
> >> > http://jeepadventures.dyndns.org/jeep.html
> >> > The meek shall inherit the earth. After I'm finished with it.
> >> > :wq!
> >>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
