Welding Question
Guest
Posts: n/a
Re: Welding Question
Umm, why would you weld something on you are going to bend????
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com <you know the drill
jegp 'at' hotmail.com < at is really @
---- I Love My O|||||||O TJ
"Allen" <abanks1@columbus.rr.com> wrote in message
news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
| I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
| internet. "IF" for some unseen reason there are no holes to match up
on the
| frame...is welding an option or would you drill new holes? I hate to
weaking
| the frame by drilling...but not sure if welding on to a rusty frame
is a
| good idea. Not to say the frame is ready to fall apart even in the
next 5
| years...it's fairly solid...possibly average for an 83..maybe a bit
better.
| So what would you guys suggest??
| Allen
|
|
|
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com <you know the drill
jegp 'at' hotmail.com < at is really @
---- I Love My O|||||||O TJ
"Allen" <abanks1@columbus.rr.com> wrote in message
news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
| I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
| internet. "IF" for some unseen reason there are no holes to match up
on the
| frame...is welding an option or would you drill new holes? I hate to
weaking
| the frame by drilling...but not sure if welding on to a rusty frame
is a
| good idea. Not to say the frame is ready to fall apart even in the
next 5
| years...it's fairly solid...possibly average for an 83..maybe a bit
better.
| So what would you guys suggest??
| Allen
|
|
|
Guest
Posts: n/a
Re: Welding Question
Umm, why would you weld something on you are going to bend????
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com <you know the drill
jegp 'at' hotmail.com < at is really @
---- I Love My O|||||||O TJ
"Allen" <abanks1@columbus.rr.com> wrote in message
news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
| I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
| internet. "IF" for some unseen reason there are no holes to match up
on the
| frame...is welding an option or would you drill new holes? I hate to
weaking
| the frame by drilling...but not sure if welding on to a rusty frame
is a
| good idea. Not to say the frame is ready to fall apart even in the
next 5
| years...it's fairly solid...possibly average for an 83..maybe a bit
better.
| So what would you guys suggest??
| Allen
|
|
|
--
--
Joe Pribe
NC
jpribe 'at' nc.rr.com <you know the drill
jegp 'at' hotmail.com < at is really @
---- I Love My O|||||||O TJ
"Allen" <abanks1@columbus.rr.com> wrote in message
news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
| I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
| internet. "IF" for some unseen reason there are no holes to match up
on the
| frame...is welding an option or would you drill new holes? I hate to
weaking
| the frame by drilling...but not sure if welding on to a rusty frame
is a
| good idea. Not to say the frame is ready to fall apart even in the
next 5
| years...it's fairly solid...possibly average for an 83..maybe a bit
better.
| So what would you guys suggest??
| Allen
|
|
|
Guest
Posts: n/a
Re: Welding Question
Same reason roll cages aren't bolted together?
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
Guest
Posts: n/a
Re: Welding Question
Same reason roll cages aren't bolted together?
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
Guest
Posts: n/a
Re: Welding Question
Same reason roll cages aren't bolted together?
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
Guest
Posts: n/a
Re: Welding Question
Very difficult to bend (at least mine are), dent, scratch... yes. I'm
pretty sure they would support the whole Jeep. They keep my rocker panels
off rocks and trees... a requirement if you care anything about the body
(and that your doors seal up and fit right). The newer sliders are as
effective and don't stick out like nerfs.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
pretty sure they would support the whole Jeep. They keep my rocker panels
off rocks and trees... a requirement if you care anything about the body
(and that your doors seal up and fit right). The newer sliders are as
effective and don't stick out like nerfs.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
Guest
Posts: n/a
Re: Welding Question
Very difficult to bend (at least mine are), dent, scratch... yes. I'm
pretty sure they would support the whole Jeep. They keep my rocker panels
off rocks and trees... a requirement if you care anything about the body
(and that your doors seal up and fit right). The newer sliders are as
effective and don't stick out like nerfs.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
pretty sure they would support the whole Jeep. They keep my rocker panels
off rocks and trees... a requirement if you care anything about the body
(and that your doors seal up and fit right). The newer sliders are as
effective and don't stick out like nerfs.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
Guest
Posts: n/a
Re: Welding Question
Very difficult to bend (at least mine are), dent, scratch... yes. I'm
pretty sure they would support the whole Jeep. They keep my rocker panels
off rocks and trees... a requirement if you care anything about the body
(and that your doors seal up and fit right). The newer sliders are as
effective and don't stick out like nerfs.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
pretty sure they would support the whole Jeep. They keep my rocker panels
off rocks and trees... a requirement if you care anything about the body
(and that your doors seal up and fit right). The newer sliders are as
effective and don't stick out like nerfs.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Joseph P" <jpribe@nc.rr.com> wrote in message
news:f9LNb.250139$dl.12993731@twister.southeast.rr .com...
> Umm, why would you weld something on you are going to bend????
>
> --
> --
> Joe Pribe
> NC
> jpribe 'at' nc.rr.com <you know the drill
> jegp 'at' hotmail.com < at is really @
> ---- I Love My O|||||||O TJ
>
>
>
> "Allen" <abanks1@columbus.rr.com> wrote in message
> news:6QENb.2809$Gs2.2008@fe1.columbus.rr.com...
> | I'm buying a used pair of nerf bars for my 83CJ. ..this is over the
> | internet. "IF" for some unseen reason there are no holes to match up
> on the
> | frame...is welding an option or would you drill new holes? I hate to
> weaking
> | the frame by drilling...but not sure if welding on to a rusty frame
> is a
> | good idea. Not to say the frame is ready to fall apart even in the
> next 5
> | years...it's fairly solid...possibly average for an 83..maybe a bit
> better.
> | So what would you guys suggest??
> | Allen
> |
> |
> |
>
Thread
Thread Starter
Forum
Replies
Last Post
Jeepers
Jeep Mailing List
0
Oct 21, 2003 04:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
