Watch those parts weasles
#61
Guest
Posts: n/a
Re: Watch those parts weasles
Sadly, the whole world over people want a new car every few years and would
rather pay their 20K every 5 years than pay 40K for one that would last for
20. Then they argue about spending a few extra quid on an synthetic oil
change for the same cost as a tank of petrol.
Dave Milne, Scotland
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:nISdnQ2TQ5RS3yDYnZ2dnUVZ_qisnZ2d@comcast.com. ..
> "c" <c@me.org> wrote in message
> news:45bd3a47$0$8999$4c368faf@roadrunner.com...
> ...
> >
> > It is sad to see that this country's biggest franchise chains have
> > succumbed to buying the inferior products that they buy. The Asian
> > companies making this crap are laughing all the way to the bank
> > while they produce this crap to lower standards than they accept
> > for their own product requirements.
> >
> Blame the consumer. People are getting what they want here.
>
> Earle
>
>
rather pay their 20K every 5 years than pay 40K for one that would last for
20. Then they argue about spending a few extra quid on an synthetic oil
change for the same cost as a tank of petrol.
Dave Milne, Scotland
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:nISdnQ2TQ5RS3yDYnZ2dnUVZ_qisnZ2d@comcast.com. ..
> "c" <c@me.org> wrote in message
> news:45bd3a47$0$8999$4c368faf@roadrunner.com...
> ...
> >
> > It is sad to see that this country's biggest franchise chains have
> > succumbed to buying the inferior products that they buy. The Asian
> > companies making this crap are laughing all the way to the bank
> > while they produce this crap to lower standards than they accept
> > for their own product requirements.
> >
> Blame the consumer. People are getting what they want here.
>
> Earle
>
>
#62
Guest
Posts: n/a
Re: Watch those parts weasles
I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
buy Chinese crap there either. I can't seem to get my wife to not shop
walmart, so have been in the one in Montrose for supplies. Still got all my
teeth, too.
I can understand a hobbyist buying a cheap caliper, the price difference to
a real one is big. So is the cost if I make a mistake machining a
crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
years before i considered it worn out and bought a digital Starrett 5 years
ago. A Harbor Freight digital that was received as a Christmas present only
lasted 8 months. I make my living with tools and don't buy crap, but did
have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in her
Cherokee, and guess where it's made? Same place as the Cannon camera I
bought online a few years back.
In short, if you will trust your engine to a Chinese thermostat, you will
have no right to complain when it melts down.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#63
Guest
Posts: n/a
Re: Watch those parts weasles
I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
buy Chinese crap there either. I can't seem to get my wife to not shop
walmart, so have been in the one in Montrose for supplies. Still got all my
teeth, too.
I can understand a hobbyist buying a cheap caliper, the price difference to
a real one is big. So is the cost if I make a mistake machining a
crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
years before i considered it worn out and bought a digital Starrett 5 years
ago. A Harbor Freight digital that was received as a Christmas present only
lasted 8 months. I make my living with tools and don't buy crap, but did
have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in her
Cherokee, and guess where it's made? Same place as the Cannon camera I
bought online a few years back.
In short, if you will trust your engine to a Chinese thermostat, you will
have no right to complain when it melts down.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#64
Guest
Posts: n/a
Re: Watch those parts weasles
I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
buy Chinese crap there either. I can't seem to get my wife to not shop
walmart, so have been in the one in Montrose for supplies. Still got all my
teeth, too.
I can understand a hobbyist buying a cheap caliper, the price difference to
a real one is big. So is the cost if I make a mistake machining a
crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
years before i considered it worn out and bought a digital Starrett 5 years
ago. A Harbor Freight digital that was received as a Christmas present only
lasted 8 months. I make my living with tools and don't buy crap, but did
have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in her
Cherokee, and guess where it's made? Same place as the Cannon camera I
bought online a few years back.
In short, if you will trust your engine to a Chinese thermostat, you will
have no right to complain when it melts down.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#65
Guest
Posts: n/a
Re: Watch those parts weasles
I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
buy Chinese crap there either. I can't seem to get my wife to not shop
walmart, so have been in the one in Montrose for supplies. Still got all my
teeth, too.
I can understand a hobbyist buying a cheap caliper, the price difference to
a real one is big. So is the cost if I make a mistake machining a
crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
years before i considered it worn out and bought a digital Starrett 5 years
ago. A Harbor Freight digital that was received as a Christmas present only
lasted 8 months. I make my living with tools and don't buy crap, but did
have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in her
Cherokee, and guess where it's made? Same place as the Cannon camera I
bought online a few years back.
In short, if you will trust your engine to a Chinese thermostat, you will
have no right to complain when it melts down.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty
#66
Guest
Posts: n/a
Re: Watch those parts weasles
The caliper I bought in GJ appears to be a high quality tool. As someone
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
#67
Guest
Posts: n/a
Re: Watch those parts weasles
The caliper I bought in GJ appears to be a high quality tool. As someone
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
#68
Guest
Posts: n/a
Re: Watch those parts weasles
The caliper I bought in GJ appears to be a high quality tool. As someone
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
#69
Guest
Posts: n/a
Re: Watch those parts weasles
The caliper I bought in GJ appears to be a high quality tool. As someone
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
here said, they make good stuff and they make bad stuff. We do to. There
just ain't no way to convince people that American companies are capable of
producing crap. Even German parts have a non-zero failure rate.
Earle
"Stupendous Man" <spam@trap.com> wrote in message
news:526q7qF1n0nnbU1@mid.individual.net...
>
> I have shopped at the Sportsman's Warehouse in Grand Junction, and didn't
> buy Chinese crap there either. I can't seem to get my wife to not shop
> walmart, so have been in the one in Montrose for supplies. Still got all
my
> teeth, too.
> I can understand a hobbyist buying a cheap caliper, the price difference
to
> a real one is big. So is the cost if I make a mistake machining a
> crankshaft, aluminum block, etc. My mechanical Mitutoyo has lasted me 20
> years before i considered it worn out and bought a digital Starrett 5
years
> ago. A Harbor Freight digital that was received as a Christmas present
only
> lasted 8 months. I make my living with tools and don't buy crap, but did
> have her buy a 150 piece "Cresecent" brand tool set at Costco to keep in
her
> Cherokee, and guess where it's made? Same place as the Cannon camera I
> bought online a few years back.
> In short, if you will trust your engine to a Chinese thermostat, you will
> have no right to complain when it melts down.
> --
> Stupendous Man,
> Defender of Freedom, Advocate of Liberty
>
>
#70
Guest
Posts: n/a
Re: Watch those parts weasles
Earle Horton wrote:
> The caliper I bought in GJ appears to be a high quality tool. As
> someone here said, they make good stuff and they make bad stuff. We
> do to. There just ain't no way to convince people that American
> companies are capable of producing crap. Even German parts have a
> non-zero failure rate.
Steve's Tools local manger explained that to me. They cary the cheap
stuff and the good stuff. I bought a cheap box end wrench because I
needed to bend it up to get to a bolt.
Generally, always buy the best tool you can afford, and watch the sales.
Otherwise just buy the one thing you need and avoid cheap sets.
I do keep a couple of real cheap sets. They are good for oddball jobs
and as loaners.
--
DougW
> The caliper I bought in GJ appears to be a high quality tool. As
> someone here said, they make good stuff and they make bad stuff. We
> do to. There just ain't no way to convince people that American
> companies are capable of producing crap. Even German parts have a
> non-zero failure rate.
Steve's Tools local manger explained that to me. They cary the cheap
stuff and the good stuff. I bought a cheap box end wrench because I
needed to bend it up to get to a bolt.
Generally, always buy the best tool you can afford, and watch the sales.
Otherwise just buy the one thing you need and avoid cheap sets.
I do keep a couple of real cheap sets. They are good for oddball jobs
and as loaners.
--
DougW