Transfer Case Issue's
09-01-2007, 04:44 PM
#1
Guest
Posts: n/a
Transfer Case Issue's
I Went to sell my long loved jeep today and seemed to have it in the
bag, that is until i went to throw it in 4 wheel. The jeep clunks
when i try to engage in 4 wheel or 4 low. The noise seems to come
from the transfer case. Just looking for a ballpark idea of what i
might be up against. Its an 86 CJ7 with a 5 speed T-140
Thanks in advance!
bag, that is until i went to throw it in 4 wheel. The jeep clunks
when i try to engage in 4 wheel or 4 low. The noise seems to come
from the transfer case. Just looking for a ballpark idea of what i
might be up against. Its an 86 CJ7 with a 5 speed T-140
Thanks in advance!
09-01-2007, 05:46 PM
#2
Guest
Posts: n/a
Re: Transfer Case Issue's
jhuddart wrote:
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
09-01-2007, 05:46 PM
#3
Guest
Posts: n/a
Re: Transfer Case Issue's
jhuddart wrote:
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
09-01-2007, 05:46 PM
#4
Guest
Posts: n/a
Re: Transfer Case Issue's
jhuddart wrote:
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
09-01-2007, 05:46 PM
#5
Guest
Posts: n/a
Re: Transfer Case Issue's
jhuddart wrote:
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
> I Went to sell my long loved jeep today and seemed to have it in the
> bag, that is until i went to throw it in 4 wheel. The jeep clunks
> when i try to engage in 4 wheel or 4 low. The noise seems to come
> from the transfer case. Just looking for a ballpark idea of what i
> might be up against. Its an 86 CJ7 with a 5 speed T-140
>
> Thanks in advance!
If it goes into 4wd the clunk is normal. There are no synchros to
line up the gears. Far as I know all transfer cases clunk.
--
DougW
09-01-2007, 09:00 PM
#6
Guest
Posts: n/a
Re: Re: Transfer Case Issue's
On Sat, 1 Sep 2007 16:46:59 -0500, "DougW"
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
09-01-2007, 09:00 PM
#7
Guest
Posts: n/a
Re: Re: Transfer Case Issue's
On Sat, 1 Sep 2007 16:46:59 -0500, "DougW"
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
09-01-2007, 09:00 PM
#8
Guest
Posts: n/a
Re: Re: Transfer Case Issue's
On Sat, 1 Sep 2007 16:46:59 -0500, "DougW"
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
09-01-2007, 09:00 PM
#9
Guest
Posts: n/a
Re: Re: Transfer Case Issue's
On Sat, 1 Sep 2007 16:46:59 -0500, "DougW"
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
<I.only.read.usenet@invalid.address> wrote:
>If it goes into 4wd the clunk is normal. There are no synchros to
>line up the gears. Far as I know all transfer cases clunk.
This is somewhat true. The trick is to get it in smoothly. Some do
best at a stand still in neutral with a stick or park with a automatic
and brakes helpd and some do better when it is rolling at a few MPH
and in neutral. (BTW, even in neutral a automatic provdes some drive
to output shaft hence reason park if standing still with automatic)
-----------------
TheSnoMan.com
09-02-2007, 07:38 AM
#10
Guest
Posts: n/a
Re: Transfer Case Issue's
On Sat, 01 Sep 2007 21:00:36 -0400, SnoMan <admin@snoman.com> wrote:
>On Sat, 1 Sep 2007 16:46:59 -0500, "DougW"
><I.only.read.usenet@invalid.address> wrote:
>
>>If it goes into 4wd the clunk is normal. There are no synchros to
>>line up the gears. Far as I know all transfer cases clunk.
>
>
>This is somewhat true. The trick is to get it in smoothly. Some do
>best at a stand still in neutral with a stick or park with a automatic
>and brakes helpd and some do better when it is rolling at a few MPH
>and in neutral. (BTW, even in neutral a automatic provdes some drive
>to output shaft hence reason park if standing still with automatic)
This is just wrong in so many ways.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
>On Sat, 1 Sep 2007 16:46:59 -0500, "DougW"
><I.only.read.usenet@invalid.address> wrote:
>
>>If it goes into 4wd the clunk is normal. There are no synchros to
>>line up the gears. Far as I know all transfer cases clunk.
>
>
>This is somewhat true. The trick is to get it in smoothly. Some do
>best at a stand still in neutral with a stick or park with a automatic
>and brakes helpd and some do better when it is rolling at a few MPH
>and in neutral. (BTW, even in neutral a automatic provdes some drive
>to output shaft hence reason park if standing still with automatic)
This is just wrong in so many ways.
--
Old Crow "Yol Bolsun!"
'82 FLTC-P "Miss Pearl"
'95 YJ Rio Grande
BS#133, SENS, TOMKAT, MAMBM
--
Posted via a free Usenet account from http://www.teranews.com
