Tranny mount done :)
11-27-2004, 01:33 PM
#21
Guest
Posts: n/a
Re: Tranny mount done :)
Buy an impact.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cherokee-LTD wrote:
>
> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
> The bar will out torque any electric impact or homeowner quality pneumatic
> gun.
>
> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
> out of a 3/4" head over the 1/2" head of equal bar length.
>
> -Brian
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cherokee-LTD wrote:
>
> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
> The bar will out torque any electric impact or homeowner quality pneumatic
> gun.
>
> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
> out of a 3/4" head over the 1/2" head of equal bar length.
>
> -Brian
11-27-2004, 01:33 PM
#22
Guest
Posts: n/a
Re: Tranny mount done :)
Buy an impact.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cherokee-LTD wrote:
>
> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
> The bar will out torque any electric impact or homeowner quality pneumatic
> gun.
>
> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
> out of a 3/4" head over the 1/2" head of equal bar length.
>
> -Brian
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cherokee-LTD wrote:
>
> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
> The bar will out torque any electric impact or homeowner quality pneumatic
> gun.
>
> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
> out of a 3/4" head over the 1/2" head of equal bar length.
>
> -Brian
11-27-2004, 02:08 PM
#23
Guest
Posts: n/a
Re: Tranny mount done :)
L.W. ("ßill") ------ III did pass the time by typing:
> Buy an impact.
Gonna, eventually. But first I need to wire up a spot for
a good compressor.
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
> Buy an impact.
Gonna, eventually. But first I need to wire up a spot for
a good compressor.
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
11-27-2004, 02:08 PM
#24
Guest
Posts: n/a
Re: Tranny mount done :)
L.W. ("ßill") ------ III did pass the time by typing:
> Buy an impact.
Gonna, eventually. But first I need to wire up a spot for
a good compressor.
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
> Buy an impact.
Gonna, eventually. But first I need to wire up a spot for
a good compressor.
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
11-27-2004, 02:08 PM
#25
Guest
Posts: n/a
Re: Tranny mount done :)
L.W. ("ßill") ------ III did pass the time by typing:
> Buy an impact.
Gonna, eventually. But first I need to wire up a spot for
a good compressor.
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
> Buy an impact.
Gonna, eventually. But first I need to wire up a spot for
a good compressor.
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breaker bar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you can get
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
11-27-2004, 03:23 PM
#26
Guest
Posts: n/a
Re: Tranny mount done :)
I replaced my 220V with a 110V, two horse about ten years ago, and
really don't notice the difference:
http://www.----------.com/aircompressor.jpg
http://www.----------.com/impact.jpg Although, the sander gives me
plenty of rest breaks.
God Bless America, ßill O|||||||O
mailto:--------------------
DougW wrote:
>
> Gonna, eventually. But first I need to wire up a spot for
> a good compressor.
really don't notice the difference:
http://www.----------.com/aircompressor.jpg
http://www.----------.com/impact.jpg Although, the sander gives me
plenty of rest breaks.
God Bless America, ßill O|||||||O
mailto:--------------------
DougW wrote:
>
> Gonna, eventually. But first I need to wire up a spot for
> a good compressor.
11-27-2004, 03:23 PM
#27
Guest
Posts: n/a
Re: Tranny mount done :)
I replaced my 220V with a 110V, two horse about ten years ago, and
really don't notice the difference:
http://www.----------.com/aircompressor.jpg
http://www.----------.com/impact.jpg Although, the sander gives me
plenty of rest breaks.
God Bless America, ßill O|||||||O
mailto:--------------------
DougW wrote:
>
> Gonna, eventually. But first I need to wire up a spot for
> a good compressor.
really don't notice the difference:
http://www.----------.com/aircompressor.jpg
http://www.----------.com/impact.jpg Although, the sander gives me
plenty of rest breaks.
God Bless America, ßill O|||||||O
mailto:--------------------
DougW wrote:
>
> Gonna, eventually. But first I need to wire up a spot for
> a good compressor.
11-27-2004, 03:23 PM
#28
Guest
Posts: n/a
Re: Tranny mount done :)
I replaced my 220V with a 110V, two horse about ten years ago, and
really don't notice the difference:
http://www.----------.com/aircompressor.jpg
http://www.----------.com/impact.jpg Although, the sander gives me
plenty of rest breaks.
God Bless America, ßill O|||||||O
mailto:--------------------
DougW wrote:
>
> Gonna, eventually. But first I need to wire up a spot for
> a good compressor.
really don't notice the difference:
http://www.----------.com/aircompressor.jpg
http://www.----------.com/impact.jpg Although, the sander gives me
plenty of rest breaks.
God Bless America, ßill O|||||||O
mailto:--------------------
DougW wrote:
>
> Gonna, eventually. But first I need to wire up a spot for
> a good compressor.
11-27-2004, 04:32 PM
#29
Guest
Posts: n/a
Re: Tranny mount done :)
I've found that I break fewer bolts on disassembly with my impact wrench
that I do with a breaker bar.
Of course I must admt that I don't put a 3' long slice of pipe on the
impact wrench, either....
On Sat, 27 Nov 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Buy an impact.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breakerbar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you canget
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
>
--
Some conditions apply. YMMV. This message was packed by weight, not
by volume. TWIAVBP, local variation may occur. Dramatization, not a real
authority. Do not induce vomiting. No user-serviceable words inside.
that I do with a breaker bar.
Of course I must admt that I don't put a 3' long slice of pipe on the
impact wrench, either....
On Sat, 27 Nov 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Buy an impact.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breakerbar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you canget
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
>
--
Some conditions apply. YMMV. This message was packed by weight, not
by volume. TWIAVBP, local variation may occur. Dramatization, not a real
authority. Do not induce vomiting. No user-serviceable words inside.
11-27-2004, 04:32 PM
#30
Guest
Posts: n/a
Re: Tranny mount done :)
I've found that I break fewer bolts on disassembly with my impact wrench
that I do with a breaker bar.
Of course I must admt that I don't put a 3' long slice of pipe on the
impact wrench, either....
On Sat, 27 Nov 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Buy an impact.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breakerbar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you canget
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
>
--
Some conditions apply. YMMV. This message was packed by weight, not
by volume. TWIAVBP, local variation may occur. Dramatization, not a real
authority. Do not induce vomiting. No user-serviceable words inside.
that I do with a breaker bar.
Of course I must admt that I don't put a 3' long slice of pipe on the
impact wrench, either....
On Sat, 27 Nov 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Buy an impact.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cherokee-LTD wrote:
>>
>> I don't disagree but a 4' bar is a lot cheaper than a quality impact gun.
>> The bar will out torque any electric impact or homeowner quality pneumatic
>> gun.
>>
>> One of my best investments was an offshore $19.00 3/4" drive 30" breakerbar
>> and a 3/4->1/2 drive adapter. It's shocking how much more torque you canget
>> out of a 3/4" head over the 1/2" head of equal bar length.
>>
>> -Brian
>
--
Some conditions apply. YMMV. This message was packed by weight, not
by volume. TWIAVBP, local variation may occur. Dramatization, not a real
authority. Do not induce vomiting. No user-serviceable words inside.
