Hm. My AX5 had the internal slave. Can you get a picture of the
transmission?

Carl


"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> 'The internal slaves are identical in every dimension but the ax15
> version has the bleeder exiting beside the feed line. Where the ax5
> exits on the pass side.'
>
> From:
> http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
> On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
>> I thought the bleeder was on the driver side on the AX5?
>>
>> Carl
>>
>> "The Merg" <greg.merg...@gmail.com> wrote in
>> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>>
>> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
>> > under the impression that the 4cyl came with the ax5, for which the
>> > bleeder valve is located on the passenger side.
>> > However, the bleeder valve on my transmission exits on the driver side,
>> > which I believe is an identifying feature of the ax15.
>> > I've wondered about this ever since I bought the thing and started
>> > reading over the Haynes manual. I was reading the pirate4x4 forum
>> > tonight and thought about it again, so I ran down and took a picture of
>> > the valve:
>>
>> >http://s143.photobucket.com/albums/r...er/?action=vie...
>>
>> > The odd thing is that I bought this from I thought the original owner,
>> > who definitely didn't seem like the type to do crazy swaps (the
>> > pristine condition was the selling point).
>>
>> > to summarize:
>> > '93 YJ
>> > 2.5L engine
>> > bleeder valve on the driver side.
>>
>> > Any ideas?
>> > Any identifying marks or tags I should take a look at in the morning?
>

 

Hm. My AX5 had the internal slave. Can you get a picture of the
transmission?

Carl


"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> 'The internal slaves are identical in every dimension but the ax15
> version has the bleeder exiting beside the feed line. Where the ax5
> exits on the pass side.'
>
> From:
> http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
> On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
>> I thought the bleeder was on the driver side on the AX5?
>>
>> Carl
>>
>> "The Merg" <greg.merg...@gmail.com> wrote in
>> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>>
>> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
>> > under the impression that the 4cyl came with the ax5, for which the
>> > bleeder valve is located on the passenger side.
>> > However, the bleeder valve on my transmission exits on the driver side,
>> > which I believe is an identifying feature of the ax15.
>> > I've wondered about this ever since I bought the thing and started
>> > reading over the Haynes manual. I was reading the pirate4x4 forum
>> > tonight and thought about it again, so I ran down and took a picture of
>> > the valve:
>>
>> >http://s143.photobucket.com/albums/r...er/?action=vie...
>>
>> > The odd thing is that I bought this from I thought the original owner,
>> > who definitely didn't seem like the type to do crazy swaps (the
>> > pristine condition was the selling point).
>>
>> > to summarize:
>> > '93 YJ
>> > 2.5L engine
>> > bleeder valve on the driver side.
>>
>> > Any ideas?
>> > Any identifying marks or tags I should take a look at in the morning?
>

 

Hm. My AX5 had the internal slave. Can you get a picture of the
transmission?

Carl


"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> 'The internal slaves are identical in every dimension but the ax15
> version has the bleeder exiting beside the feed line. Where the ax5
> exits on the pass side.'
>
> From:
> http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
> On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
>> I thought the bleeder was on the driver side on the AX5?
>>
>> Carl
>>
>> "The Merg" <greg.merg...@gmail.com> wrote in
>> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>>
>> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
>> > under the impression that the 4cyl came with the ax5, for which the
>> > bleeder valve is located on the passenger side.
>> > However, the bleeder valve on my transmission exits on the driver side,
>> > which I believe is an identifying feature of the ax15.
>> > I've wondered about this ever since I bought the thing and started
>> > reading over the Haynes manual. I was reading the pirate4x4 forum
>> > tonight and thought about it again, so I ran down and took a picture of
>> > the valve:
>>
>> >http://s143.photobucket.com/albums/r...er/?action=vie...
>>
>> > The odd thing is that I bought this from I thought the original owner,
>> > who definitely didn't seem like the type to do crazy swaps (the
>> > pristine condition was the selling point).
>>
>> > to summarize:
>> > '93 YJ
>> > 2.5L engine
>> > bleeder valve on the driver side.
>>
>> > Any ideas?
>> > Any identifying marks or tags I should take a look at in the morning?
>

 

Carl,
So your's exited on the driver side as well?
AFAIK everything I've read has always said that the ax5 exits on the
passenger side. I actually remember being really confused when I first
had to bleed the clutch because the book (haynes) said 'passenger
side'. But this could be a simple problem of different model years?
I put in the motor and have replaced the clutch once since then - I
kind of recall having to rotate the bleeder valve to make it fit - but
that could be my memory making things up; it does that sometimes.

I'll take more complete pictures in the morning.

Carl wrote:
> Hm. My AX5 had the internal slave. Can you get a picture of the
> transmission?
>
> Carl
>
>
> "The Merg" <greg.mergner@gmail.com> wrote in message
> news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> > 'The internal slaves are identical in every dimension but the ax15
> > version has the bleeder exiting beside the feed line. Where the ax5
> > exits on the pass side.'
> >
> > From:
> > http://www.pirate4x4.com/forum/showt...ghlight=thread
> >
> >
> > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> >> I thought the bleeder was on the driver side on the AX5?
> >>
> >> Carl
> >>
> >> "The Merg" <greg.merg...@gmail.com> wrote in
> >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
> >>
> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> >> > under the impression that the 4cyl came with the ax5, for which the
> >> > bleeder valve is located on the passenger side.
> >> > However, the bleeder valve on my transmission exits on the driver side,
> >> > which I believe is an identifying feature of the ax15.
> >> > I've wondered about this ever since I bought the thing and started
> >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> >> > tonight and thought about it again, so I ran down and took a picture of
> >> > the valve:
> >>
> >> >http://s143.photobucket.com/albums/r...er/?action=vie...
> >>
> >> > The odd thing is that I bought this from I thought the original owner,
> >> > who definitely didn't seem like the type to do crazy swaps (the
> >> > pristine condition was the selling point).
> >>
> >> > to summarize:
> >> > '93 YJ
> >> > 2.5L engine
> >> > bleeder valve on the driver side.
> >>
> >> > Any ideas?
> >> > Any identifying marks or tags I should take a look at in the morning?
> >

 

Carl,
So your's exited on the driver side as well?
AFAIK everything I've read has always said that the ax5 exits on the
passenger side. I actually remember being really confused when I first
had to bleed the clutch because the book (haynes) said 'passenger
side'. But this could be a simple problem of different model years?
I put in the motor and have replaced the clutch once since then - I
kind of recall having to rotate the bleeder valve to make it fit - but
that could be my memory making things up; it does that sometimes.

I'll take more complete pictures in the morning.

Carl wrote:
> Hm. My AX5 had the internal slave. Can you get a picture of the
> transmission?
>
> Carl
>
>
> "The Merg" <greg.mergner@gmail.com> wrote in message
> news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> > 'The internal slaves are identical in every dimension but the ax15
> > version has the bleeder exiting beside the feed line. Where the ax5
> > exits on the pass side.'
> >
> > From:
> > http://www.pirate4x4.com/forum/showt...ghlight=thread
> >
> >
> > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> >> I thought the bleeder was on the driver side on the AX5?
> >>
> >> Carl
> >>
> >> "The Merg" <greg.merg...@gmail.com> wrote in
> >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
> >>
> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> >> > under the impression that the 4cyl came with the ax5, for which the
> >> > bleeder valve is located on the passenger side.
> >> > However, the bleeder valve on my transmission exits on the driver side,
> >> > which I believe is an identifying feature of the ax15.
> >> > I've wondered about this ever since I bought the thing and started
> >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> >> > tonight and thought about it again, so I ran down and took a picture of
> >> > the valve:
> >>
> >> >http://s143.photobucket.com/albums/r...er/?action=vie...
> >>
> >> > The odd thing is that I bought this from I thought the original owner,
> >> > who definitely didn't seem like the type to do crazy swaps (the
> >> > pristine condition was the selling point).
> >>
> >> > to summarize:
> >> > '93 YJ
> >> > 2.5L engine
> >> > bleeder valve on the driver side.
> >>
> >> > Any ideas?
> >> > Any identifying marks or tags I should take a look at in the morning?
> >

 

Carl,
So your's exited on the driver side as well?
AFAIK everything I've read has always said that the ax5 exits on the
passenger side. I actually remember being really confused when I first
had to bleed the clutch because the book (haynes) said 'passenger
side'. But this could be a simple problem of different model years?
I put in the motor and have replaced the clutch once since then - I
kind of recall having to rotate the bleeder valve to make it fit - but
that could be my memory making things up; it does that sometimes.

I'll take more complete pictures in the morning.

Carl wrote:
> Hm. My AX5 had the internal slave. Can you get a picture of the
> transmission?
>
> Carl
>
>
> "The Merg" <greg.mergner@gmail.com> wrote in message
> news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> > 'The internal slaves are identical in every dimension but the ax15
> > version has the bleeder exiting beside the feed line. Where the ax5
> > exits on the pass side.'
> >
> > From:
> > http://www.pirate4x4.com/forum/showt...ghlight=thread
> >
> >
> > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> >> I thought the bleeder was on the driver side on the AX5?
> >>
> >> Carl
> >>
> >> "The Merg" <greg.merg...@gmail.com> wrote in
> >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
> >>
> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> >> > under the impression that the 4cyl came with the ax5, for which the
> >> > bleeder valve is located on the passenger side.
> >> > However, the bleeder valve on my transmission exits on the driver side,
> >> > which I believe is an identifying feature of the ax15.
> >> > I've wondered about this ever since I bought the thing and started
> >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> >> > tonight and thought about it again, so I ran down and took a picture of
> >> > the valve:
> >>
> >> >http://s143.photobucket.com/albums/r...er/?action=vie...
> >>
> >> > The odd thing is that I bought this from I thought the original owner,
> >> > who definitely didn't seem like the type to do crazy swaps (the
> >> > pristine condition was the selling point).
> >>
> >> > to summarize:
> >> > '93 YJ
> >> > 2.5L engine
> >> > bleeder valve on the driver side.
> >>
> >> > Any ideas?
> >> > Any identifying marks or tags I should take a look at in the morning?
> >

 

Carl,
So your's exited on the driver side as well?
AFAIK everything I've read has always said that the ax5 exits on the
passenger side. I actually remember being really confused when I first
had to bleed the clutch because the book (haynes) said 'passenger
side'. But this could be a simple problem of different model years?
I put in the motor and have replaced the clutch once since then - I
kind of recall having to rotate the bleeder valve to make it fit - but
that could be my memory making things up; it does that sometimes.

I'll take more complete pictures in the morning.

Carl wrote:
> Hm. My AX5 had the internal slave. Can you get a picture of the
> transmission?
>
> Carl
>
>
> "The Merg" <greg.mergner@gmail.com> wrote in message
> news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> > 'The internal slaves are identical in every dimension but the ax15
> > version has the bleeder exiting beside the feed line. Where the ax5
> > exits on the pass side.'
> >
> > From:
> > http://www.pirate4x4.com/forum/showt...ghlight=thread
> >
> >
> > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> >> I thought the bleeder was on the driver side on the AX5?
> >>
> >> Carl
> >>
> >> "The Merg" <greg.merg...@gmail.com> wrote in
> >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
> >>
> >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> >> > under the impression that the 4cyl came with the ax5, for which the
> >> > bleeder valve is located on the passenger side.
> >> > However, the bleeder valve on my transmission exits on the driver side,
> >> > which I believe is an identifying feature of the ax15.
> >> > I've wondered about this ever since I bought the thing and started
> >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> >> > tonight and thought about it again, so I ran down and took a picture of
> >> > the valve:
> >>
> >> >http://s143.photobucket.com/albums/r...er/?action=vie...
> >>
> >> > The odd thing is that I bought this from I thought the original owner,
> >> > who definitely didn't seem like the type to do crazy swaps (the
> >> > pristine condition was the selling point).
> >>
> >> > to summarize:
> >> > '93 YJ
> >> > 2.5L engine
> >> > bleeder valve on the driver side.
> >>
> >> > Any ideas?
> >> > Any identifying marks or tags I should take a look at in the morning?
> >

 

> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down.

huh...possibly. would everything still bolt in correctly?


On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote:
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down.
>
> Earle
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com...
>
> > Carl,
> > So your's exited on the driver side as well?
> > AFAIK everything I've read has always said that the ax5 exits on the
> > passenger side. I actually remember being really confused when I first
> > had to bleed the clutch because the book (haynes) said 'passenger
> > side'. But this could be a simple problem of different model years?
> > I put in the motor and have replaced the clutch once since then - I
> > kind of recall having to rotate the bleeder valve to make it fit - but
> > that could be my memory making things up; it does that sometimes.
>
> > I'll take more complete pictures in the morning.
>
> > Carl wrote:
> > > Hm. My AX5 had the internal slave. Can you get a picture of the
> > > transmission?
>
> > > Carl
>
> > > "The Merg" <greg.merg...@gmail.com> wrote in message
> > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com...
> > > > 'The internal slaves are identical in every dimension but the ax15
> > > > version has the bleeder exiting beside the feed line. Where the ax5
> > > > exits on the pass side.'
>
> > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
>
> > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> > > >> I thought the bleeder was on the driver side on the AX5?
>
> > > >> Carl
>
> > > >> "The Merg" <greg.merg...@gmail.com> wrote in
> > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > > >> > under the impression that the 4cyl came with the ax5, for which the
> > > >> > bleeder valve is located on the passenger side.
> > > >> > However, the bleeder valve on my transmission exits on the driver
> side,
> > > >> > which I believe is an identifying feature of the ax15.
> > > >> > I've wondered about this ever since I bought the thing and started
> > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > > >> > tonight and thought about it again, so I ran down and took a
> picture of
> > > >> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > > >> > The odd thing is that I bought this from I thought the original
> owner,
> > > >> > who definitely didn't seem like the type to do crazy swaps (the
> > > >> > pristine condition was the selling point).
>
> > > >> > to summarize:
> > > >> > '93 YJ
> > > >> > 2.5L engine
> > > >> > bleeder valve on the driver side.
>
> > > >> > Any ideas?
> > > >> > Any identifying marks or tags I should take a look at in the
> morning?

 

> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down.

huh...possibly. would everything still bolt in correctly?


On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote:
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down.
>
> Earle
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com...
>
> > Carl,
> > So your's exited on the driver side as well?
> > AFAIK everything I've read has always said that the ax5 exits on the
> > passenger side. I actually remember being really confused when I first
> > had to bleed the clutch because the book (haynes) said 'passenger
> > side'. But this could be a simple problem of different model years?
> > I put in the motor and have replaced the clutch once since then - I
> > kind of recall having to rotate the bleeder valve to make it fit - but
> > that could be my memory making things up; it does that sometimes.
>
> > I'll take more complete pictures in the morning.
>
> > Carl wrote:
> > > Hm. My AX5 had the internal slave. Can you get a picture of the
> > > transmission?
>
> > > Carl
>
> > > "The Merg" <greg.merg...@gmail.com> wrote in message
> > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com...
> > > > 'The internal slaves are identical in every dimension but the ax15
> > > > version has the bleeder exiting beside the feed line. Where the ax5
> > > > exits on the pass side.'
>
> > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
>
> > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> > > >> I thought the bleeder was on the driver side on the AX5?
>
> > > >> Carl
>
> > > >> "The Merg" <greg.merg...@gmail.com> wrote in
> > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > > >> > under the impression that the 4cyl came with the ax5, for which the
> > > >> > bleeder valve is located on the passenger side.
> > > >> > However, the bleeder valve on my transmission exits on the driver
> side,
> > > >> > which I believe is an identifying feature of the ax15.
> > > >> > I've wondered about this ever since I bought the thing and started
> > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > > >> > tonight and thought about it again, so I ran down and took a
> picture of
> > > >> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > > >> > The odd thing is that I bought this from I thought the original
> owner,
> > > >> > who definitely didn't seem like the type to do crazy swaps (the
> > > >> > pristine condition was the selling point).
>
> > > >> > to summarize:
> > > >> > '93 YJ
> > > >> > 2.5L engine
> > > >> > bleeder valve on the driver side.
>
> > > >> > Any ideas?
> > > >> > Any identifying marks or tags I should take a look at in the
> morning?

 

> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down.

huh...possibly. would everything still bolt in correctly?


On Jan 16, 1:38 am, "Earle Horton" <e...@vascongado.usa> wrote:
> You replaced the clutch and didn't get an external slave setup for it? I am
> thinking you put the bell housing in upside down.
>
> Earle
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168928320.624733.99430@q2g2000cwa.goo glegroups.com...
>
> > Carl,
> > So your's exited on the driver side as well?
> > AFAIK everything I've read has always said that the ax5 exits on the
> > passenger side. I actually remember being really confused when I first
> > had to bleed the clutch because the book (haynes) said 'passenger
> > side'. But this could be a simple problem of different model years?
> > I put in the motor and have replaced the clutch once since then - I
> > kind of recall having to rotate the bleeder valve to make it fit - but
> > that could be my memory making things up; it does that sometimes.
>
> > I'll take more complete pictures in the morning.
>
> > Carl wrote:
> > > Hm. My AX5 had the internal slave. Can you get a picture of the
> > > transmission?
>
> > > Carl
>
> > > "The Merg" <greg.merg...@gmail.com> wrote in message
> > >news:1168924152.954128.307970@v45g2000cwv.googleg roups.com...
> > > > 'The internal slaves are identical in every dimension but the ax15
> > > > version has the bleeder exiting beside the feed line. Where the ax5
> > > > exits on the pass side.'
>
> > > > From:http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
>
> > > > On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> > > >> I thought the bleeder was on the driver side on the AX5?
>
> > > >> Carl
>
> > > >> "The Merg" <greg.merg...@gmail.com> wrote in
> > > >> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > > >> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > > >> > under the impression that the 4cyl came with the ax5, for which the
> > > >> > bleeder valve is located on the passenger side.
> > > >> > However, the bleeder valve on my transmission exits on the driver
> side,
> > > >> > which I believe is an identifying feature of the ax15.
> > > >> > I've wondered about this ever since I bought the thing and started
> > > >> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > > >> > tonight and thought about it again, so I ran down and took a
> picture of
> > > >> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > > >> > The odd thing is that I bought this from I thought the original
> owner,
> > > >> > who definitely didn't seem like the type to do crazy swaps (the
> > > >> > pristine condition was the selling point).
>
> > > >> > to summarize:
> > > >> > '93 YJ
> > > >> > 2.5L engine
> > > >> > bleeder valve on the driver side.
>
> > > >> > Any ideas?
> > > >> > Any identifying marks or tags I should take a look at in the
> morning?