Stumper: AX5 or not?
#1
Guest
Posts: n/a
Stumper: AX5 or not?
OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
under the impression that the 4cyl came with the ax5, for which the
bleeder valve is located on the passenger side.
However, the bleeder valve on my transmission exits on the driver side,
which I believe is an identifying feature of the ax15.
I've wondered about this ever since I bought the thing and started
reading over the Haynes manual. I was reading the pirate4x4 forum
tonight and thought about it again, so I ran down and took a picture of
the valve:
http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
The odd thing is that I bought this from I thought the original owner,
who definitely didn't seem like the type to do crazy swaps (the
pristine condition was the selling point).
to summarize:
'93 YJ
2.5L engine
bleeder valve on the driver side.
Any ideas?
Any identifying marks or tags I should take a look at in the morning?
under the impression that the 4cyl came with the ax5, for which the
bleeder valve is located on the passenger side.
However, the bleeder valve on my transmission exits on the driver side,
which I believe is an identifying feature of the ax15.
I've wondered about this ever since I bought the thing and started
reading over the Haynes manual. I was reading the pirate4x4 forum
tonight and thought about it again, so I ran down and took a picture of
the valve:
http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
The odd thing is that I bought this from I thought the original owner,
who definitely didn't seem like the type to do crazy swaps (the
pristine condition was the selling point).
to summarize:
'93 YJ
2.5L engine
bleeder valve on the driver side.
Any ideas?
Any identifying marks or tags I should take a look at in the morning?
#2
Guest
Posts: n/a
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
#3
Guest
Posts: n/a
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
#4
Guest
Posts: n/a
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
#5
Guest
Posts: n/a
Re: Stumper: AX5 or not?
I thought the bleeder was on the driver side on the AX5?
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168923423.949939.20480@l53g2000cwa.googlegro ups.com...
> OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> under the impression that the 4cyl came with the ax5, for which the
> bleeder valve is located on the passenger side.
> However, the bleeder valve on my transmission exits on the driver side,
> which I believe is an identifying feature of the ax15.
> I've wondered about this ever since I bought the thing and started
> reading over the Haynes manual. I was reading the pirate4x4 forum
> tonight and thought about it again, so I ran down and took a picture of
> the valve:
>
> http://s143.photobucket.com/albums/r...t=IMG_0293.jpg
>
> The odd thing is that I bought this from I thought the original owner,
> who definitely didn't seem like the type to do crazy swaps (the
> pristine condition was the selling point).
>
> to summarize:
> '93 YJ
> 2.5L engine
> bleeder valve on the driver side.
>
> Any ideas?
> Any identifying marks or tags I should take a look at in the morning?
>
#6
Guest
Posts: n/a
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
#7
Guest
Posts: n/a
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
#8
Guest
Posts: n/a
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
#9
Guest
Posts: n/a
Re: Stumper: AX5 or not?
'The internal slaves are identical in every dimension but the ax15
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
version has the bleeder exiting beside the feed line. Where the ax5
exits on the pass side.'
From:
http://www.pirate4x4.com/forum/showt...ghlight=thread
On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
> I thought the bleeder was on the driver side on the AX5?
>
> Carl
>
> "The Merg" <greg.merg...@gmail.com> wrote in messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>
> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
> > under the impression that the 4cyl came with the ax5, for which the
> > bleeder valve is located on the passenger side.
> > However, the bleeder valve on my transmission exits on the driver side,
> > which I believe is an identifying feature of the ax15.
> > I've wondered about this ever since I bought the thing and started
> > reading over the Haynes manual. I was reading the pirate4x4 forum
> > tonight and thought about it again, so I ran down and took a picture of
> > the valve:
>
> >http://s143.photobucket.com/albums/r...er/?action=vie...
>
> > The odd thing is that I bought this from I thought the original owner,
> > who definitely didn't seem like the type to do crazy swaps (the
> > pristine condition was the selling point).
>
> > to summarize:
> > '93 YJ
> > 2.5L engine
> > bleeder valve on the driver side.
>
> > Any ideas?
> > Any identifying marks or tags I should take a look at in the morning?
#10
Guest
Posts: n/a
Re: Stumper: AX5 or not?
Hm. My AX5 had the internal slave. Can you get a picture of the
transmission?
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> 'The internal slaves are identical in every dimension but the ax15
> version has the bleeder exiting beside the feed line. Where the ax5
> exits on the pass side.'
>
> From:
> http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
> On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
>> I thought the bleeder was on the driver side on the AX5?
>>
>> Carl
>>
>> "The Merg" <greg.merg...@gmail.com> wrote in
>> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>>
>> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
>> > under the impression that the 4cyl came with the ax5, for which the
>> > bleeder valve is located on the passenger side.
>> > However, the bleeder valve on my transmission exits on the driver side,
>> > which I believe is an identifying feature of the ax15.
>> > I've wondered about this ever since I bought the thing and started
>> > reading over the Haynes manual. I was reading the pirate4x4 forum
>> > tonight and thought about it again, so I ran down and took a picture of
>> > the valve:
>>
>> >http://s143.photobucket.com/albums/r...er/?action=vie...
>>
>> > The odd thing is that I bought this from I thought the original owner,
>> > who definitely didn't seem like the type to do crazy swaps (the
>> > pristine condition was the selling point).
>>
>> > to summarize:
>> > '93 YJ
>> > 2.5L engine
>> > bleeder valve on the driver side.
>>
>> > Any ideas?
>> > Any identifying marks or tags I should take a look at in the morning?
>
transmission?
Carl
"The Merg" <greg.mergner@gmail.com> wrote in message
news:1168924152.954128.307970@v45g2000cwv.googlegr oups.com...
> 'The internal slaves are identical in every dimension but the ax15
> version has the bleeder exiting beside the feed line. Where the ax5
> exits on the pass side.'
>
> From:
> http://www.pirate4x4.com/forum/showt...ghlight=thread
>
>
> On Jan 16, 12:06 am, "Carl" <carlsai...@hotmailREMOVE.com> wrote:
>> I thought the bleeder was on the driver side on the AX5?
>>
>> Carl
>>
>> "The Merg" <greg.merg...@gmail.com> wrote in
>> messagenews:1168923423.949939.20480@l53g2000cwa.go oglegroups.com...
>>
>> > OK guys, this is from a '93 YJ with a 2.5L. Now, I've always been
>> > under the impression that the 4cyl came with the ax5, for which the
>> > bleeder valve is located on the passenger side.
>> > However, the bleeder valve on my transmission exits on the driver side,
>> > which I believe is an identifying feature of the ax15.
>> > I've wondered about this ever since I bought the thing and started
>> > reading over the Haynes manual. I was reading the pirate4x4 forum
>> > tonight and thought about it again, so I ran down and took a picture of
>> > the valve:
>>
>> >http://s143.photobucket.com/albums/r...er/?action=vie...
>>
>> > The odd thing is that I bought this from I thought the original owner,
>> > who definitely didn't seem like the type to do crazy swaps (the
>> > pristine condition was the selling point).
>>
>> > to summarize:
>> > '93 YJ
>> > 2.5L engine
>> > bleeder valve on the driver side.
>>
>> > Any ideas?
>> > Any identifying marks or tags I should take a look at in the morning?
>