Skid plate mount nut broke free
Guest
Posts: n/a
Skid plate mount nut broke free
Hi all,
While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
the frame broke free of what I'm assuming is its weld. Fortunately, it
broke free after I had the bolt about half way out and I was able to hack
saw the bolt in half and drop the skid plate.
Is there any way to fix this other that having someone cut open the frame
and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
running with five bolts rather than six.
Thanks in advance.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
the frame broke free of what I'm assuming is its weld. Fortunately, it
broke free after I had the bolt about half way out and I was able to hack
saw the bolt in half and drop the skid plate.
Is there any way to fix this other that having someone cut open the frame
and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
running with five bolts rather than six.
Thanks in advance.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer, 1891
Guest
Posts: n/a
Re: Skid plate mount nut broke free
What about a nutsert?
Michael White wrote:
> Hi all,
>
> While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
> the frame broke free of what I'm assuming is its weld. Fortunately, it
> broke free after I had the bolt about half way out and I was able to hack
> saw the bolt in half and drop the skid plate.
>
> Is there any way to fix this other that having someone cut open the frame
> and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
> is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> running with five bolts rather than six.
>
> Thanks in advance.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Michael White wrote:
> Hi all,
>
> While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
> the frame broke free of what I'm assuming is its weld. Fortunately, it
> broke free after I had the bolt about half way out and I was able to hack
> saw the bolt in half and drop the skid plate.
>
> Is there any way to fix this other that having someone cut open the frame
> and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
> is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> running with five bolts rather than six.
>
> Thanks in advance.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Guest
Posts: n/a
Re: Skid plate mount nut broke free
What about a nutsert?
Michael White wrote:
> Hi all,
>
> While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
> the frame broke free of what I'm assuming is its weld. Fortunately, it
> broke free after I had the bolt about half way out and I was able to hack
> saw the bolt in half and drop the skid plate.
>
> Is there any way to fix this other that having someone cut open the frame
> and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
> is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> running with five bolts rather than six.
>
> Thanks in advance.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Michael White wrote:
> Hi all,
>
> While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
> the frame broke free of what I'm assuming is its weld. Fortunately, it
> broke free after I had the bolt about half way out and I was able to hack
> saw the bolt in half and drop the skid plate.
>
> Is there any way to fix this other that having someone cut open the frame
> and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
> is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> running with five bolts rather than six.
>
> Thanks in advance.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Guest
Posts: n/a
Re: Skid plate mount nut broke free
What about a nutsert?
Michael White wrote:
> Hi all,
>
> While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
> the frame broke free of what I'm assuming is its weld. Fortunately, it
> broke free after I had the bolt about half way out and I was able to hack
> saw the bolt in half and drop the skid plate.
>
> Is there any way to fix this other that having someone cut open the frame
> and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
> is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> running with five bolts rather than six.
>
> Thanks in advance.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Michael White wrote:
> Hi all,
>
> While dropping the skid plate on my '82 Scrambler, one of the nuts inside of
> the frame broke free of what I'm assuming is its weld. Fortunately, it
> broke free after I had the bolt about half way out and I was able to hack
> saw the bolt in half and drop the skid plate.
>
> Is there any way to fix this other that having someone cut open the frame
> and weld in a new nut? Say, some sort of grade 5 butterfly nut? The hole
> is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> running with five bolts rather than six.
>
> Thanks in advance.
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Guest
Posts: n/a
Re: Skid plate mount nut broke free
And what is a nutset? Since I am also running with 5 out of 6 on my CJ
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
> What about a nutsert?
>
> Michael White wrote:
>
> > Hi all,
> >
> > While dropping the skid plate on my '82 Scrambler, one of the nuts
inside of
> > the frame broke free of what I'm assuming is its weld. Fortunately, it
> > broke free after I had the bolt about half way out and I was able to
hack
> > saw the bolt in half and drop the skid plate.
> >
> > Is there any way to fix this other that having someone cut open the
frame
> > and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
hole
> > is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> > running with five bolts rather than six.
> >
> > Thanks in advance.
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
> What about a nutsert?
>
> Michael White wrote:
>
> > Hi all,
> >
> > While dropping the skid plate on my '82 Scrambler, one of the nuts
inside of
> > the frame broke free of what I'm assuming is its weld. Fortunately, it
> > broke free after I had the bolt about half way out and I was able to
hack
> > saw the bolt in half and drop the skid plate.
> >
> > Is there any way to fix this other that having someone cut open the
frame
> > and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
hole
> > is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> > running with five bolts rather than six.
> >
> > Thanks in advance.
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
Guest
Posts: n/a
Re: Skid plate mount nut broke free
And what is a nutset? Since I am also running with 5 out of 6 on my CJ
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
> What about a nutsert?
>
> Michael White wrote:
>
> > Hi all,
> >
> > While dropping the skid plate on my '82 Scrambler, one of the nuts
inside of
> > the frame broke free of what I'm assuming is its weld. Fortunately, it
> > broke free after I had the bolt about half way out and I was able to
hack
> > saw the bolt in half and drop the skid plate.
> >
> > Is there any way to fix this other that having someone cut open the
frame
> > and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
hole
> > is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> > running with five bolts rather than six.
> >
> > Thanks in advance.
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
> What about a nutsert?
>
> Michael White wrote:
>
> > Hi all,
> >
> > While dropping the skid plate on my '82 Scrambler, one of the nuts
inside of
> > the frame broke free of what I'm assuming is its weld. Fortunately, it
> > broke free after I had the bolt about half way out and I was able to
hack
> > saw the bolt in half and drop the skid plate.
> >
> > Is there any way to fix this other that having someone cut open the
frame
> > and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
hole
> > is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> > running with five bolts rather than six.
> >
> > Thanks in advance.
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
Guest
Posts: n/a
Re: Skid plate mount nut broke free
And what is a nutset? Since I am also running with 5 out of 6 on my CJ
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
> What about a nutsert?
>
> Michael White wrote:
>
> > Hi all,
> >
> > While dropping the skid plate on my '82 Scrambler, one of the nuts
inside of
> > the frame broke free of what I'm assuming is its weld. Fortunately, it
> > broke free after I had the bolt about half way out and I was able to
hack
> > saw the bolt in half and drop the skid plate.
> >
> > Is there any way to fix this other that having someone cut open the
frame
> > and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
hole
> > is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> > running with five bolts rather than six.
> >
> > Thanks in advance.
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
> What about a nutsert?
>
> Michael White wrote:
>
> > Hi all,
> >
> > While dropping the skid plate on my '82 Scrambler, one of the nuts
inside of
> > the frame broke free of what I'm assuming is its weld. Fortunately, it
> > broke free after I had the bolt about half way out and I was able to
hack
> > saw the bolt in half and drop the skid plate.
> >
> > Is there any way to fix this other that having someone cut open the
frame
> > and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
hole
> > is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
> > running with five bolts rather than six.
> >
> > Thanks in advance.
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
Guest
Posts: n/a
Re: Skid plate mount nut broke free
Nutsert. You basically drill out your hole to the proper diam. for the
nutsert and then pound in the 'nut' part into the hole. You then have a
'nut' without reaching the backside of the frame. Should be just fine
for a skid plate. Here is a link:
<http://search.netscape.com/ns/boomframe.jsp?query=nutsert&page=1&offset=0&result _url=redir%3Fsrc%3Dwebsearch%26amp%3BrequestId%3D8 e71a6b1eaf54c90%26amp%3BclickedItemRank%3D1%26amp% 3BuserQuery%3Dnutsert%26amp%3BclickedItemURN%3Dhtt p%253A%252F%252Fwww.aboveboardelectronics.com%252F Avdel%252Fblind%252Fnutsert.htm%26amp%3Binvocation Type%3D-%26amp%3BfromPage%3DNSCPIndex&remove_url=http%3A%2 F%2Fwww.aboveboardelectronics.com%2FAvdel%2Fblind% 2Fnutsert.htm>
Greg wrote:
> And what is a nutset? Since I am also running with 5 out of 6 on my CJ
>
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
>
>>What about a nutsert?
>>
>>Michael White wrote:
>>
>>
>>>Hi all,
>>>
>>>While dropping the skid plate on my '82 Scrambler, one of the nuts
>
> inside of
>
>>>the frame broke free of what I'm assuming is its weld. Fortunately, it
>>>broke free after I had the bolt about half way out and I was able to
>
> hack
>
>>>saw the bolt in half and drop the skid plate.
>>>
>>>Is there any way to fix this other that having someone cut open the
>
> frame
>
>>>and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
>
> hole
>
>>>is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
>>>running with five bolts rather than six.
>>>
>>>Thanks in advance.
>>
>>--
>>________________________________________________ ___________
>>tw
>>03 TJ Rubicon
>>01 XJ Sport
>>
>>"Reports that say that something hasn't happened are always interesting
>>to me, because as we know, there are known knowns, there are things
>>we know we know. We also know there are known unknowns; that is to
>>say we know there are some things we do not know. But there are also
>>unknown unknowns — the ones we don't know we don't know."
>>-- Donald Rumsfeld (2003)
>>
>>"I think that gay marriage is something that should be between a man and
>>a woman."
>>-- Arnold Schwarzenegger (2003)
>>
>>________________________________________________ ___________
>>
>
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
nutsert and then pound in the 'nut' part into the hole. You then have a
'nut' without reaching the backside of the frame. Should be just fine
for a skid plate. Here is a link:
<http://search.netscape.com/ns/boomframe.jsp?query=nutsert&page=1&offset=0&result _url=redir%3Fsrc%3Dwebsearch%26amp%3BrequestId%3D8 e71a6b1eaf54c90%26amp%3BclickedItemRank%3D1%26amp% 3BuserQuery%3Dnutsert%26amp%3BclickedItemURN%3Dhtt p%253A%252F%252Fwww.aboveboardelectronics.com%252F Avdel%252Fblind%252Fnutsert.htm%26amp%3Binvocation Type%3D-%26amp%3BfromPage%3DNSCPIndex&remove_url=http%3A%2 F%2Fwww.aboveboardelectronics.com%2FAvdel%2Fblind% 2Fnutsert.htm>
Greg wrote:
> And what is a nutset? Since I am also running with 5 out of 6 on my CJ
>
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
>
>>What about a nutsert?
>>
>>Michael White wrote:
>>
>>
>>>Hi all,
>>>
>>>While dropping the skid plate on my '82 Scrambler, one of the nuts
>
> inside of
>
>>>the frame broke free of what I'm assuming is its weld. Fortunately, it
>>>broke free after I had the bolt about half way out and I was able to
>
> hack
>
>>>saw the bolt in half and drop the skid plate.
>>>
>>>Is there any way to fix this other that having someone cut open the
>
> frame
>
>>>and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
>
> hole
>
>>>is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
>>>running with five bolts rather than six.
>>>
>>>Thanks in advance.
>>
>>--
>>________________________________________________ ___________
>>tw
>>03 TJ Rubicon
>>01 XJ Sport
>>
>>"Reports that say that something hasn't happened are always interesting
>>to me, because as we know, there are known knowns, there are things
>>we know we know. We also know there are known unknowns; that is to
>>say we know there are some things we do not know. But there are also
>>unknown unknowns — the ones we don't know we don't know."
>>-- Donald Rumsfeld (2003)
>>
>>"I think that gay marriage is something that should be between a man and
>>a woman."
>>-- Arnold Schwarzenegger (2003)
>>
>>________________________________________________ ___________
>>
>
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Guest
Posts: n/a
Re: Skid plate mount nut broke free
Nutsert. You basically drill out your hole to the proper diam. for the
nutsert and then pound in the 'nut' part into the hole. You then have a
'nut' without reaching the backside of the frame. Should be just fine
for a skid plate. Here is a link:
<http://search.netscape.com/ns/boomframe.jsp?query=nutsert&page=1&offset=0&result _url=redir%3Fsrc%3Dwebsearch%26amp%3BrequestId%3D8 e71a6b1eaf54c90%26amp%3BclickedItemRank%3D1%26amp% 3BuserQuery%3Dnutsert%26amp%3BclickedItemURN%3Dhtt p%253A%252F%252Fwww.aboveboardelectronics.com%252F Avdel%252Fblind%252Fnutsert.htm%26amp%3Binvocation Type%3D-%26amp%3BfromPage%3DNSCPIndex&remove_url=http%3A%2 F%2Fwww.aboveboardelectronics.com%2FAvdel%2Fblind% 2Fnutsert.htm>
Greg wrote:
> And what is a nutset? Since I am also running with 5 out of 6 on my CJ
>
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
>
>>What about a nutsert?
>>
>>Michael White wrote:
>>
>>
>>>Hi all,
>>>
>>>While dropping the skid plate on my '82 Scrambler, one of the nuts
>
> inside of
>
>>>the frame broke free of what I'm assuming is its weld. Fortunately, it
>>>broke free after I had the bolt about half way out and I was able to
>
> hack
>
>>>saw the bolt in half and drop the skid plate.
>>>
>>>Is there any way to fix this other that having someone cut open the
>
> frame
>
>>>and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
>
> hole
>
>>>is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
>>>running with five bolts rather than six.
>>>
>>>Thanks in advance.
>>
>>--
>>________________________________________________ ___________
>>tw
>>03 TJ Rubicon
>>01 XJ Sport
>>
>>"Reports that say that something hasn't happened are always interesting
>>to me, because as we know, there are known knowns, there are things
>>we know we know. We also know there are known unknowns; that is to
>>say we know there are some things we do not know. But there are also
>>unknown unknowns — the ones we don't know we don't know."
>>-- Donald Rumsfeld (2003)
>>
>>"I think that gay marriage is something that should be between a man and
>>a woman."
>>-- Arnold Schwarzenegger (2003)
>>
>>________________________________________________ ___________
>>
>
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
nutsert and then pound in the 'nut' part into the hole. You then have a
'nut' without reaching the backside of the frame. Should be just fine
for a skid plate. Here is a link:
<http://search.netscape.com/ns/boomframe.jsp?query=nutsert&page=1&offset=0&result _url=redir%3Fsrc%3Dwebsearch%26amp%3BrequestId%3D8 e71a6b1eaf54c90%26amp%3BclickedItemRank%3D1%26amp% 3BuserQuery%3Dnutsert%26amp%3BclickedItemURN%3Dhtt p%253A%252F%252Fwww.aboveboardelectronics.com%252F Avdel%252Fblind%252Fnutsert.htm%26amp%3Binvocation Type%3D-%26amp%3BfromPage%3DNSCPIndex&remove_url=http%3A%2 F%2Fwww.aboveboardelectronics.com%2FAvdel%2Fblind% 2Fnutsert.htm>
Greg wrote:
> And what is a nutset? Since I am also running with 5 out of 6 on my CJ
>
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
>
>>What about a nutsert?
>>
>>Michael White wrote:
>>
>>
>>>Hi all,
>>>
>>>While dropping the skid plate on my '82 Scrambler, one of the nuts
>
> inside of
>
>>>the frame broke free of what I'm assuming is its weld. Fortunately, it
>>>broke free after I had the bolt about half way out and I was able to
>
> hack
>
>>>saw the bolt in half and drop the skid plate.
>>>
>>>Is there any way to fix this other that having someone cut open the
>
> frame
>
>>>and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
>
> hole
>
>>>is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
>>>running with five bolts rather than six.
>>>
>>>Thanks in advance.
>>
>>--
>>________________________________________________ ___________
>>tw
>>03 TJ Rubicon
>>01 XJ Sport
>>
>>"Reports that say that something hasn't happened are always interesting
>>to me, because as we know, there are known knowns, there are things
>>we know we know. We also know there are known unknowns; that is to
>>say we know there are some things we do not know. But there are also
>>unknown unknowns — the ones we don't know we don't know."
>>-- Donald Rumsfeld (2003)
>>
>>"I think that gay marriage is something that should be between a man and
>>a woman."
>>-- Arnold Schwarzenegger (2003)
>>
>>________________________________________________ ___________
>>
>
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
Guest
Posts: n/a
Re: Skid plate mount nut broke free
Nutsert. You basically drill out your hole to the proper diam. for the
nutsert and then pound in the 'nut' part into the hole. You then have a
'nut' without reaching the backside of the frame. Should be just fine
for a skid plate. Here is a link:
<http://search.netscape.com/ns/boomframe.jsp?query=nutsert&page=1&offset=0&result _url=redir%3Fsrc%3Dwebsearch%26amp%3BrequestId%3D8 e71a6b1eaf54c90%26amp%3BclickedItemRank%3D1%26amp% 3BuserQuery%3Dnutsert%26amp%3BclickedItemURN%3Dhtt p%253A%252F%252Fwww.aboveboardelectronics.com%252F Avdel%252Fblind%252Fnutsert.htm%26amp%3Binvocation Type%3D-%26amp%3BfromPage%3DNSCPIndex&remove_url=http%3A%2 F%2Fwww.aboveboardelectronics.com%2FAvdel%2Fblind% 2Fnutsert.htm>
Greg wrote:
> And what is a nutset? Since I am also running with 5 out of 6 on my CJ
>
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
>
>>What about a nutsert?
>>
>>Michael White wrote:
>>
>>
>>>Hi all,
>>>
>>>While dropping the skid plate on my '82 Scrambler, one of the nuts
>
> inside of
>
>>>the frame broke free of what I'm assuming is its weld. Fortunately, it
>>>broke free after I had the bolt about half way out and I was able to
>
> hack
>
>>>saw the bolt in half and drop the skid plate.
>>>
>>>Is there any way to fix this other that having someone cut open the
>
> frame
>
>>>and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
>
> hole
>
>>>is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
>>>running with five bolts rather than six.
>>>
>>>Thanks in advance.
>>
>>--
>>________________________________________________ ___________
>>tw
>>03 TJ Rubicon
>>01 XJ Sport
>>
>>"Reports that say that something hasn't happened are always interesting
>>to me, because as we know, there are known knowns, there are things
>>we know we know. We also know there are known unknowns; that is to
>>say we know there are some things we do not know. But there are also
>>unknown unknowns — the ones we don't know we don't know."
>>-- Donald Rumsfeld (2003)
>>
>>"I think that gay marriage is something that should be between a man and
>>a woman."
>>-- Arnold Schwarzenegger (2003)
>>
>>________________________________________________ ___________
>>
>
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
nutsert and then pound in the 'nut' part into the hole. You then have a
'nut' without reaching the backside of the frame. Should be just fine
for a skid plate. Here is a link:
<http://search.netscape.com/ns/boomframe.jsp?query=nutsert&page=1&offset=0&result _url=redir%3Fsrc%3Dwebsearch%26amp%3BrequestId%3D8 e71a6b1eaf54c90%26amp%3BclickedItemRank%3D1%26amp% 3BuserQuery%3Dnutsert%26amp%3BclickedItemURN%3Dhtt p%253A%252F%252Fwww.aboveboardelectronics.com%252F Avdel%252Fblind%252Fnutsert.htm%26amp%3Binvocation Type%3D-%26amp%3BfromPage%3DNSCPIndex&remove_url=http%3A%2 F%2Fwww.aboveboardelectronics.com%2FAvdel%2Fblind% 2Fnutsert.htm>
Greg wrote:
> And what is a nutset? Since I am also running with 5 out of 6 on my CJ
>
> "twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
> news:kxUBb.8$357.3353665@newssvr30.news.prodigy.co m...
>
>>What about a nutsert?
>>
>>Michael White wrote:
>>
>>
>>>Hi all,
>>>
>>>While dropping the skid plate on my '82 Scrambler, one of the nuts
>
> inside of
>
>>>the frame broke free of what I'm assuming is its weld. Fortunately, it
>>>broke free after I had the bolt about half way out and I was able to
>
> hack
>
>>>saw the bolt in half and drop the skid plate.
>>>
>>>Is there any way to fix this other that having someone cut open the
>
> frame
>
>>>and weld in a new nut? Say, some sort of grade 5 butterfly nut? The
>
> hole
>
>>>is larger than I'd like to tap (I'd say 9/16" or 5/8"). Right now I'm
>>>running with five bolts rather than six.
>>>
>>>Thanks in advance.
>>
>>--
>>________________________________________________ ___________
>>tw
>>03 TJ Rubicon
>>01 XJ Sport
>>
>>"Reports that say that something hasn't happened are always interesting
>>to me, because as we know, there are known knowns, there are things
>>we know we know. We also know there are known unknowns; that is to
>>say we know there are some things we do not know. But there are also
>>unknown unknowns — the ones we don't know we don't know."
>>-- Donald Rumsfeld (2003)
>>
>>"I think that gay marriage is something that should be between a man and
>>a woman."
>>-- Arnold Schwarzenegger (2003)
>>
>>________________________________________________ ___________
>>
>
>
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
