Skid plate mount nut broke free
12-13-2003, 01:33 PM
#51
Guest
Posts: n/a
Re: Skid plate mount nut broke free
A nut with arms, huh? I'm sure I've met him on the usenet.
BTW, nice diagram!
DougW wrote:
> T. Greening did pass the time by typing:
>
>>If you're going to drill anyway, and want something that doesn't look
>>jury-rigged, how about this. Find yourself a nice thick washer and weld the
>>appropriate nut to it. Drill out the old bolt hole just large enough to
>>fit the nut through. Insert nut and weld the washer to the frame. No funky
>>bolt through methods with their frame crushing potentials and you would
>>barely notice the repair.
>
>
> Nut with arms. No, seriously. You cut a small slot and insert a nut that
> has been welded to a bar. The bar turns and is held by the sides of the
> framerail. The arms then ------ the load so it doesn't pull through
>
> _________________________
> | / _ \ |
> | | / \ | |
> | | \_/ | |
> |_________\___/___________|
>
> _____
> ________|_____|__________
> |_________________________|
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
BTW, nice diagram!
DougW wrote:
> T. Greening did pass the time by typing:
>
>>If you're going to drill anyway, and want something that doesn't look
>>jury-rigged, how about this. Find yourself a nice thick washer and weld the
>>appropriate nut to it. Drill out the old bolt hole just large enough to
>>fit the nut through. Insert nut and weld the washer to the frame. No funky
>>bolt through methods with their frame crushing potentials and you would
>>barely notice the repair.
>
>
> Nut with arms. No, seriously. You cut a small slot and insert a nut that
> has been welded to a bar. The bar turns and is held by the sides of the
> framerail. The arms then ------ the load so it doesn't pull through
>
> _________________________
> | / _ \ |
> | | / \ | |
> | | \_/ | |
> |_________\___/___________|
>
> _____
> ________|_____|__________
> |_________________________|
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
12-13-2003, 01:33 PM
#52
Guest
Posts: n/a
Re: Skid plate mount nut broke free
A nut with arms, huh? I'm sure I've met him on the usenet.
BTW, nice diagram!
DougW wrote:
> T. Greening did pass the time by typing:
>
>>If you're going to drill anyway, and want something that doesn't look
>>jury-rigged, how about this. Find yourself a nice thick washer and weld the
>>appropriate nut to it. Drill out the old bolt hole just large enough to
>>fit the nut through. Insert nut and weld the washer to the frame. No funky
>>bolt through methods with their frame crushing potentials and you would
>>barely notice the repair.
>
>
> Nut with arms. No, seriously. You cut a small slot and insert a nut that
> has been welded to a bar. The bar turns and is held by the sides of the
> framerail. The arms then ------ the load so it doesn't pull through
>
> _________________________
> | / _ \ |
> | | / \ | |
> | | \_/ | |
> |_________\___/___________|
>
> _____
> ________|_____|__________
> |_________________________|
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
BTW, nice diagram!
DougW wrote:
> T. Greening did pass the time by typing:
>
>>If you're going to drill anyway, and want something that doesn't look
>>jury-rigged, how about this. Find yourself a nice thick washer and weld the
>>appropriate nut to it. Drill out the old bolt hole just large enough to
>>fit the nut through. Insert nut and weld the washer to the frame. No funky
>>bolt through methods with their frame crushing potentials and you would
>>barely notice the repair.
>
>
> Nut with arms. No, seriously. You cut a small slot and insert a nut that
> has been welded to a bar. The bar turns and is held by the sides of the
> framerail. The arms then ------ the load so it doesn't pull through
>
> _________________________
> | / _ \ |
> | | / \ | |
> | | \_/ | |
> |_________\___/___________|
>
> _____
> ________|_____|__________
> |_________________________|
>
--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport
"Reports that say that something hasn't happened are always interesting
to me, because as we know, there are known knowns, there are things
we know we know. We also know there are known unknowns; that is to
say we know there are some things we do not know. But there are also
unknown unknowns — the ones we don't know we don't know."
-- Donald Rumsfeld (2003)
"I think that gay marriage is something that should be between a man and
a woman."
-- Arnold Schwarzenegger (2003)
__________________________________________________ _________
12-17-2003, 02:29 AM
#53
Guest
Posts: n/a
Re: Skid plate mount nut broke free
talking about my first wife there, are you.
"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:eYICb.878$CC5.708@newssvr22.news.prodigy.com. ..
> A nut with arms, huh? I'm sure I've met him on the usenet.
>
> BTW, nice diagram!
>
> DougW wrote:
>
> > T. Greening did pass the time by typing:
> >
> >>If you're going to drill anyway, and want something that doesn't look
> >>jury-rigged, how about this. Find yourself a nice thick washer and weld
the
> >>appropriate nut to it. Drill out the old bolt hole just large enough
to
> >>fit the nut through. Insert nut and weld the washer to the frame. No
funky
> >>bolt through methods with their frame crushing potentials and you would
> >>barely notice the repair.
> >
> >
> > Nut with arms. No, seriously. You cut a small slot and insert a nut
that
> > has been welded to a bar. The bar turns and is held by the sides of the
> > framerail. The arms then ------ the load so it doesn't pull through
> >
> > _________________________
> > | / _ \ |
> > | | / \ | |
> > | | \_/ | |
> > |_________\___/___________|
> >
> > _____
> > ________|_____|__________
> > |_________________________|
> >
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:eYICb.878$CC5.708@newssvr22.news.prodigy.com. ..
> A nut with arms, huh? I'm sure I've met him on the usenet.
>
> BTW, nice diagram!
>
> DougW wrote:
>
> > T. Greening did pass the time by typing:
> >
> >>If you're going to drill anyway, and want something that doesn't look
> >>jury-rigged, how about this. Find yourself a nice thick washer and weld
the
> >>appropriate nut to it. Drill out the old bolt hole just large enough
to
> >>fit the nut through. Insert nut and weld the washer to the frame. No
funky
> >>bolt through methods with their frame crushing potentials and you would
> >>barely notice the repair.
> >
> >
> > Nut with arms. No, seriously. You cut a small slot and insert a nut
that
> > has been welded to a bar. The bar turns and is held by the sides of the
> > framerail. The arms then ------ the load so it doesn't pull through
> >
> > _________________________
> > | / _ \ |
> > | | / \ | |
> > | | \_/ | |
> > |_________\___/___________|
> >
> > _____
> > ________|_____|__________
> > |_________________________|
> >
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
12-17-2003, 02:29 AM
#54
Guest
Posts: n/a
Re: Skid plate mount nut broke free
talking about my first wife there, are you.
"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:eYICb.878$CC5.708@newssvr22.news.prodigy.com. ..
> A nut with arms, huh? I'm sure I've met him on the usenet.
>
> BTW, nice diagram!
>
> DougW wrote:
>
> > T. Greening did pass the time by typing:
> >
> >>If you're going to drill anyway, and want something that doesn't look
> >>jury-rigged, how about this. Find yourself a nice thick washer and weld
the
> >>appropriate nut to it. Drill out the old bolt hole just large enough
to
> >>fit the nut through. Insert nut and weld the washer to the frame. No
funky
> >>bolt through methods with their frame crushing potentials and you would
> >>barely notice the repair.
> >
> >
> > Nut with arms. No, seriously. You cut a small slot and insert a nut
that
> > has been welded to a bar. The bar turns and is held by the sides of the
> > framerail. The arms then ------ the load so it doesn't pull through
> >
> > _________________________
> > | / _ \ |
> > | | / \ | |
> > | | \_/ | |
> > |_________\___/___________|
> >
> > _____
> > ________|_____|__________
> > |_________________________|
> >
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:eYICb.878$CC5.708@newssvr22.news.prodigy.com. ..
> A nut with arms, huh? I'm sure I've met him on the usenet.
>
> BTW, nice diagram!
>
> DougW wrote:
>
> > T. Greening did pass the time by typing:
> >
> >>If you're going to drill anyway, and want something that doesn't look
> >>jury-rigged, how about this. Find yourself a nice thick washer and weld
the
> >>appropriate nut to it. Drill out the old bolt hole just large enough
to
> >>fit the nut through. Insert nut and weld the washer to the frame. No
funky
> >>bolt through methods with their frame crushing potentials and you would
> >>barely notice the repair.
> >
> >
> > Nut with arms. No, seriously. You cut a small slot and insert a nut
that
> > has been welded to a bar. The bar turns and is held by the sides of the
> > framerail. The arms then ------ the load so it doesn't pull through
> >
> > _________________________
> > | / _ \ |
> > | | / \ | |
> > | | \_/ | |
> > |_________\___/___________|
> >
> > _____
> > ________|_____|__________
> > |_________________________|
> >
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
12-17-2003, 02:29 AM
#55
Guest
Posts: n/a
Re: Skid plate mount nut broke free
talking about my first wife there, are you.
"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:eYICb.878$CC5.708@newssvr22.news.prodigy.com. ..
> A nut with arms, huh? I'm sure I've met him on the usenet.
>
> BTW, nice diagram!
>
> DougW wrote:
>
> > T. Greening did pass the time by typing:
> >
> >>If you're going to drill anyway, and want something that doesn't look
> >>jury-rigged, how about this. Find yourself a nice thick washer and weld
the
> >>appropriate nut to it. Drill out the old bolt hole just large enough
to
> >>fit the nut through. Insert nut and weld the washer to the frame. No
funky
> >>bolt through methods with their frame crushing potentials and you would
> >>barely notice the repair.
> >
> >
> > Nut with arms. No, seriously. You cut a small slot and insert a nut
that
> > has been welded to a bar. The bar turns and is held by the sides of the
> > framerail. The arms then ------ the load so it doesn't pull through
> >
> > _________________________
> > | / _ \ |
> > | | / \ | |
> > | | \_/ | |
> > |_________\___/___________|
> >
> > _____
> > ________|_____|__________
> > |_________________________|
> >
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:eYICb.878$CC5.708@newssvr22.news.prodigy.com. ..
> A nut with arms, huh? I'm sure I've met him on the usenet.
>
> BTW, nice diagram!
>
> DougW wrote:
>
> > T. Greening did pass the time by typing:
> >
> >>If you're going to drill anyway, and want something that doesn't look
> >>jury-rigged, how about this. Find yourself a nice thick washer and weld
the
> >>appropriate nut to it. Drill out the old bolt hole just large enough
to
> >>fit the nut through. Insert nut and weld the washer to the frame. No
funky
> >>bolt through methods with their frame crushing potentials and you would
> >>barely notice the repair.
> >
> >
> > Nut with arms. No, seriously. You cut a small slot and insert a nut
that
> > has been welded to a bar. The bar turns and is held by the sides of the
> > framerail. The arms then ------ the load so it doesn't pull through
> >
> > _________________________
> > | / _ \ |
> > | | / \ | |
> > | | \_/ | |
> > |_________\___/___________|
> >
> > _____
> > ________|_____|__________
> > |_________________________|
> >
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> "Reports that say that something hasn't happened are always interesting
> to me, because as we know, there are known knowns, there are things
> we know we know. We also know there are known unknowns; that is to
> say we know there are some things we do not know. But there are also
> unknown unknowns — the ones we don't know we don't know."
> -- Donald Rumsfeld (2003)
>
> "I think that gay marriage is something that should be between a man and
> a woman."
> -- Arnold Schwarzenegger (2003)
>
> __________________________________________________ _________
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)