Oil pressure sending unit - 95 JGC
07-30-2006, 10:47 PM
#1
Guest
Posts: n/a
Oil pressure sending unit - 95 JGC
Hi,
I know from reading a bunch of the subject lines and replies that this
subject is touched on a lot, but I didn't see this answer.
Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
I have a Haynes and it shows a picture. In the picture I see the edge
of the front spring and the oil filter, but when I look along the pan,
I don't see the sending unit as shown (all I see in that general area
is the starter or at least I think it's the starter)
I've been having a problem with guage flucuation (another subject I
see discussed a lot), so I want to make re-seating the connector my
next step, but.....
Thanks for any help someone can provide
-bob-
I know from reading a bunch of the subject lines and replies that this
subject is touched on a lot, but I didn't see this answer.
Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
I have a Haynes and it shows a picture. In the picture I see the edge
of the front spring and the oil filter, but when I look along the pan,
I don't see the sending unit as shown (all I see in that general area
is the starter or at least I think it's the starter)
I've been having a problem with guage flucuation (another subject I
see discussed a lot), so I want to make re-seating the connector my
next step, but.....
Thanks for any help someone can provide
-bob-
07-30-2006, 11:02 PM
#2
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
It will be right next to the filter. Hopefully there will be a wire
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
07-30-2006, 11:02 PM
#3
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
It will be right next to the filter. Hopefully there will be a wire
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
07-30-2006, 11:02 PM
#4
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
It will be right next to the filter. Hopefully there will be a wire
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
07-30-2006, 11:02 PM
#5
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
It will be right next to the filter. Hopefully there will be a wire
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
attached.
"Bob V" <bobvalli@NOSPAMyahoo.com> wrote in message
news:aprqc298g05nf64bfoh18psdfd7bg80jpb@4ax.com...
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
>
> -bob-
07-31-2006, 10:53 PM
#6
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
Bob V proclaimed:
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
07-31-2006, 10:53 PM
#7
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
Bob V proclaimed:
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
07-31-2006, 10:53 PM
#8
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
Bob V proclaimed:
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
07-31-2006, 10:53 PM
#9
Guest
Posts: n/a
Re: Oil pressure sending unit - 95 JGC
Bob V proclaimed:
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
> Hi,
>
> I know from reading a bunch of the subject lines and replies that this
> subject is touched on a lot, but I didn't see this answer.
>
> Why can't I find the oil pressure sending unit on my 95 JGC Laredo?
>
> I have a Haynes and it shows a picture. In the picture I see the edge
> of the front spring and the oil filter, but when I look along the pan,
> I don't see the sending unit as shown (all I see in that general area
> is the starter or at least I think it's the starter)
>
> I've been having a problem with guage flucuation (another subject I
> see discussed a lot), so I want to make re-seating the connector my
> next step, but.....
>
> Thanks for any help someone can provide
V8 or I-6?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)