NV4500 & Hydraulic Clutch
06-23-2004, 10:09 AM
#21
Guest
Posts: n/a
Re: NV4500 & Hydraulic Clutch
In article <40D8BEAE.15EFEEF7@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
> Hmm.... Is the fork a pusher or a puller? The one I saw that was a
> puller had a larger hole for a threaded rod to go through. The tranny
> was a BW T-5 from a Mustang though...
I pretty sure it's a pusher,
>
> Is yours held down by a spring with the big ball bearing pivot out near
> the bell housing hole?
Crap, it's been two years since I installed it, I'll havta go look.
>
> I turned the stock CJ linkage into a puller by flipping the bar on the
> bell crank to the top. Worked.
Mike Romain <romainm@sympatico.ca> wrote:
> Hmm.... Is the fork a pusher or a puller? The one I saw that was a
> puller had a larger hole for a threaded rod to go through. The tranny
> was a BW T-5 from a Mustang though...
I pretty sure it's a pusher,
>
> Is yours held down by a spring with the big ball bearing pivot out near
> the bell housing hole?
Crap, it's been two years since I installed it, I'll havta go look.
>
> I turned the stock CJ linkage into a puller by flipping the bar on the
> bell crank to the top. Worked.
06-23-2004, 10:16 AM
#22
Guest
Posts: n/a
Re: NV4500 & Hydraulic Clutch
In article <40D8B5C4.63F22E24@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
06-23-2004, 10:16 AM
#23
Guest
Posts: n/a
Re: NV4500 & Hydraulic Clutch
In article <40D8B5C4.63F22E24@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
06-23-2004, 10:16 AM
#24
Guest
Posts: n/a
Re: NV4500 & Hydraulic Clutch
In article <40D8B5C4.63F22E24@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
06-23-2004, 10:16 AM
#25
Guest
Posts: n/a
Re: NV4500 & Hydraulic Clutch
In article <40D8B5C4.63F22E24@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
L.W.(ßill) ------ III <----------@***.net> wrote:
> Remember that box of trash you threw away, the one with number
> twenty in it? ;-) Give Advanced Adapters a call:
> http://www.advanceadapters.com/contact.html
Yeah, I think thats the thing to do.
Thread
Thread Starter
Forum
Replies
Last Post
michael.white@charter.net
Jeep Mailing List
4
02-13-2007 11:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)