No Spark
#11
Guest
Posts: n/a
Re: No Spark
Fred - do the diagnostic code thing and then tell us what is comes back
with. Starting with the ignition off, turn the key on-off-on-off-on in a
nice even cadence, then look at the odometer. This is where the Jeep tells
you what ails it if it has anything to say. If it has nothing to say it
will just say 'done'. If the computer has picked up an error in the system
it will show a code or a series of codes. Write them all down and post them
here - the folks here will tell you what they mean.
This is easy and free and if it shows codes the answer (or at least a good
clue) is handed to you rather than chasing the problem by replacing parts
that might or might not be problematic.
Do it.
Tomes
"Fred Garvin" <fgarvin@fgarvin.com> wrote in message
news:AHu5f.131$GQ.114@tornado.texas.rr.com...
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
with. Starting with the ignition off, turn the key on-off-on-off-on in a
nice even cadence, then look at the odometer. This is where the Jeep tells
you what ails it if it has anything to say. If it has nothing to say it
will just say 'done'. If the computer has picked up an error in the system
it will show a code or a series of codes. Write them all down and post them
here - the folks here will tell you what they mean.
This is easy and free and if it shows codes the answer (or at least a good
clue) is handed to you rather than chasing the problem by replacing parts
that might or might not be problematic.
Do it.
Tomes
"Fred Garvin" <fgarvin@fgarvin.com> wrote in message
news:AHu5f.131$GQ.114@tornado.texas.rr.com...
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
#12
Guest
Posts: n/a
Re: No Spark
Fred - do the diagnostic code thing and then tell us what is comes back
with. Starting with the ignition off, turn the key on-off-on-off-on in a
nice even cadence, then look at the odometer. This is where the Jeep tells
you what ails it if it has anything to say. If it has nothing to say it
will just say 'done'. If the computer has picked up an error in the system
it will show a code or a series of codes. Write them all down and post them
here - the folks here will tell you what they mean.
This is easy and free and if it shows codes the answer (or at least a good
clue) is handed to you rather than chasing the problem by replacing parts
that might or might not be problematic.
Do it.
Tomes
"Fred Garvin" <fgarvin@fgarvin.com> wrote in message
news:AHu5f.131$GQ.114@tornado.texas.rr.com...
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
with. Starting with the ignition off, turn the key on-off-on-off-on in a
nice even cadence, then look at the odometer. This is where the Jeep tells
you what ails it if it has anything to say. If it has nothing to say it
will just say 'done'. If the computer has picked up an error in the system
it will show a code or a series of codes. Write them all down and post them
here - the folks here will tell you what they mean.
This is easy and free and if it shows codes the answer (or at least a good
clue) is handed to you rather than chasing the problem by replacing parts
that might or might not be problematic.
Do it.
Tomes
"Fred Garvin" <fgarvin@fgarvin.com> wrote in message
news:AHu5f.131$GQ.114@tornado.texas.rr.com...
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
#13
Guest
Posts: n/a
Re: No Spark
Fred - do the diagnostic code thing and then tell us what is comes back
with. Starting with the ignition off, turn the key on-off-on-off-on in a
nice even cadence, then look at the odometer. This is where the Jeep tells
you what ails it if it has anything to say. If it has nothing to say it
will just say 'done'. If the computer has picked up an error in the system
it will show a code or a series of codes. Write them all down and post them
here - the folks here will tell you what they mean.
This is easy and free and if it shows codes the answer (or at least a good
clue) is handed to you rather than chasing the problem by replacing parts
that might or might not be problematic.
Do it.
Tomes
"Fred Garvin" <fgarvin@fgarvin.com> wrote in message
news:AHu5f.131$GQ.114@tornado.texas.rr.com...
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
with. Starting with the ignition off, turn the key on-off-on-off-on in a
nice even cadence, then look at the odometer. This is where the Jeep tells
you what ails it if it has anything to say. If it has nothing to say it
will just say 'done'. If the computer has picked up an error in the system
it will show a code or a series of codes. Write them all down and post them
here - the folks here will tell you what they mean.
This is easy and free and if it shows codes the answer (or at least a good
clue) is handed to you rather than chasing the problem by replacing parts
that might or might not be problematic.
Do it.
Tomes
"Fred Garvin" <fgarvin@fgarvin.com> wrote in message
news:AHu5f.131$GQ.114@tornado.texas.rr.com...
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
#14
Guest
Posts: n/a
Re: No Spark
Thanks, Tomes. The only thing I received was "Done."
"Tomes" <XXtomanml@earthlink.net> wrote in message
news:8qD5f.17261$QE1.981@newsread2.news.atl.earthl ink.net...
> Fred - do the diagnostic code thing and then tell us what is comes back
> with. Starting with the ignition off, turn the key on-off-on-off-on in a
> nice even cadence, then look at the odometer. This is where the Jeep
> tells
> you what ails it if it has anything to say. If it has nothing to say it
> will just say 'done'. If the computer has picked up an error in the
> system
> it will show a code or a series of codes. Write them all down and post
> them
> here - the folks here will tell you what they mean.
>
> This is easy and free and if it shows codes the answer (or at least a good
> clue) is handed to you rather than chasing the problem by replacing parts
> that might or might not be problematic.
> Do it.
> Tomes
>
> "Fred Garvin" <fgarvin@fgarvin.com> wrote in message
> news:AHu5f.131$GQ.114@tornado.texas.rr.com...
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no
>> spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
>
"Tomes" <XXtomanml@earthlink.net> wrote in message
news:8qD5f.17261$QE1.981@newsread2.news.atl.earthl ink.net...
> Fred - do the diagnostic code thing and then tell us what is comes back
> with. Starting with the ignition off, turn the key on-off-on-off-on in a
> nice even cadence, then look at the odometer. This is where the Jeep
> tells
> you what ails it if it has anything to say. If it has nothing to say it
> will just say 'done'. If the computer has picked up an error in the
> system
> it will show a code or a series of codes. Write them all down and post
> them
> here - the folks here will tell you what they mean.
>
> This is easy and free and if it shows codes the answer (or at least a good
> clue) is handed to you rather than chasing the problem by replacing parts
> that might or might not be problematic.
> Do it.
> Tomes
>
> "Fred Garvin" <fgarvin@fgarvin.com> wrote in message
> news:AHu5f.131$GQ.114@tornado.texas.rr.com...
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no
>> spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
>
#15
Guest
Posts: n/a
Re: No Spark
Thanks, Tomes. The only thing I received was "Done."
"Tomes" <XXtomanml@earthlink.net> wrote in message
news:8qD5f.17261$QE1.981@newsread2.news.atl.earthl ink.net...
> Fred - do the diagnostic code thing and then tell us what is comes back
> with. Starting with the ignition off, turn the key on-off-on-off-on in a
> nice even cadence, then look at the odometer. This is where the Jeep
> tells
> you what ails it if it has anything to say. If it has nothing to say it
> will just say 'done'. If the computer has picked up an error in the
> system
> it will show a code or a series of codes. Write them all down and post
> them
> here - the folks here will tell you what they mean.
>
> This is easy and free and if it shows codes the answer (or at least a good
> clue) is handed to you rather than chasing the problem by replacing parts
> that might or might not be problematic.
> Do it.
> Tomes
>
> "Fred Garvin" <fgarvin@fgarvin.com> wrote in message
> news:AHu5f.131$GQ.114@tornado.texas.rr.com...
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no
>> spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
>
"Tomes" <XXtomanml@earthlink.net> wrote in message
news:8qD5f.17261$QE1.981@newsread2.news.atl.earthl ink.net...
> Fred - do the diagnostic code thing and then tell us what is comes back
> with. Starting with the ignition off, turn the key on-off-on-off-on in a
> nice even cadence, then look at the odometer. This is where the Jeep
> tells
> you what ails it if it has anything to say. If it has nothing to say it
> will just say 'done'. If the computer has picked up an error in the
> system
> it will show a code or a series of codes. Write them all down and post
> them
> here - the folks here will tell you what they mean.
>
> This is easy and free and if it shows codes the answer (or at least a good
> clue) is handed to you rather than chasing the problem by replacing parts
> that might or might not be problematic.
> Do it.
> Tomes
>
> "Fred Garvin" <fgarvin@fgarvin.com> wrote in message
> news:AHu5f.131$GQ.114@tornado.texas.rr.com...
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no
>> spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
>
#16
Guest
Posts: n/a
Re: No Spark
Thanks, Tomes. The only thing I received was "Done."
"Tomes" <XXtomanml@earthlink.net> wrote in message
news:8qD5f.17261$QE1.981@newsread2.news.atl.earthl ink.net...
> Fred - do the diagnostic code thing and then tell us what is comes back
> with. Starting with the ignition off, turn the key on-off-on-off-on in a
> nice even cadence, then look at the odometer. This is where the Jeep
> tells
> you what ails it if it has anything to say. If it has nothing to say it
> will just say 'done'. If the computer has picked up an error in the
> system
> it will show a code or a series of codes. Write them all down and post
> them
> here - the folks here will tell you what they mean.
>
> This is easy and free and if it shows codes the answer (or at least a good
> clue) is handed to you rather than chasing the problem by replacing parts
> that might or might not be problematic.
> Do it.
> Tomes
>
> "Fred Garvin" <fgarvin@fgarvin.com> wrote in message
> news:AHu5f.131$GQ.114@tornado.texas.rr.com...
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no
>> spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
>
"Tomes" <XXtomanml@earthlink.net> wrote in message
news:8qD5f.17261$QE1.981@newsread2.news.atl.earthl ink.net...
> Fred - do the diagnostic code thing and then tell us what is comes back
> with. Starting with the ignition off, turn the key on-off-on-off-on in a
> nice even cadence, then look at the odometer. This is where the Jeep
> tells
> you what ails it if it has anything to say. If it has nothing to say it
> will just say 'done'. If the computer has picked up an error in the
> system
> it will show a code or a series of codes. Write them all down and post
> them
> here - the folks here will tell you what they mean.
>
> This is easy and free and if it shows codes the answer (or at least a good
> clue) is handed to you rather than chasing the problem by replacing parts
> that might or might not be problematic.
> Do it.
> Tomes
>
> "Fred Garvin" <fgarvin@fgarvin.com> wrote in message
> news:AHu5f.131$GQ.114@tornado.texas.rr.com...
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no
>> spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
>
#17
Guest
Posts: n/a
Re: No Spark
I'm going after that next. I'll let you know.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:mXz5f.11749$MN6.9273@fed1read04...
> It's on the passenger-side where the distributor used to be. The
> distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> should still be there being driven off the old distributor shaft IIRC.
>
> Jerry
>
> Fred Garvin wrote:
>> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
>> think. It's on the bell housing. Where's the camshaft sensor?
>>
>> No codes.
>>
>> Thanks!
>> "Jerry Bransford" <jerrypb@***.net> wrote in message
>> news:gRu5f.11727$MN6.7839@fed1read04...
>>
>>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>>working ok?
>>>
>>>Fred Garvin wrote:
>>>
>>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>>no spark?
>>>>
>>>>Anybody have a suggestion of where to go next?
>>>>
>>>>Many thanks!
>>>>
>>>>Fred
>>>>
>>>>
>>>>
>>>
>>>--
>>>Jerry Bransford
>>>PP-ASEL N6TAY
>>>See the Geezer Jeep at
>>>http://members.***.net/jerrypb/
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:mXz5f.11749$MN6.9273@fed1read04...
> It's on the passenger-side where the distributor used to be. The
> distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> should still be there being driven off the old distributor shaft IIRC.
>
> Jerry
>
> Fred Garvin wrote:
>> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
>> think. It's on the bell housing. Where's the camshaft sensor?
>>
>> No codes.
>>
>> Thanks!
>> "Jerry Bransford" <jerrypb@***.net> wrote in message
>> news:gRu5f.11727$MN6.7839@fed1read04...
>>
>>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>>working ok?
>>>
>>>Fred Garvin wrote:
>>>
>>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>>no spark?
>>>>
>>>>Anybody have a suggestion of where to go next?
>>>>
>>>>Many thanks!
>>>>
>>>>Fred
>>>>
>>>>
>>>>
>>>
>>>--
>>>Jerry Bransford
>>>PP-ASEL N6TAY
>>>See the Geezer Jeep at
>>>http://members.***.net/jerrypb/
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
#18
Guest
Posts: n/a
Re: No Spark
I'm going after that next. I'll let you know.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:mXz5f.11749$MN6.9273@fed1read04...
> It's on the passenger-side where the distributor used to be. The
> distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> should still be there being driven off the old distributor shaft IIRC.
>
> Jerry
>
> Fred Garvin wrote:
>> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
>> think. It's on the bell housing. Where's the camshaft sensor?
>>
>> No codes.
>>
>> Thanks!
>> "Jerry Bransford" <jerrypb@***.net> wrote in message
>> news:gRu5f.11727$MN6.7839@fed1read04...
>>
>>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>>working ok?
>>>
>>>Fred Garvin wrote:
>>>
>>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>>no spark?
>>>>
>>>>Anybody have a suggestion of where to go next?
>>>>
>>>>Many thanks!
>>>>
>>>>Fred
>>>>
>>>>
>>>>
>>>
>>>--
>>>Jerry Bransford
>>>PP-ASEL N6TAY
>>>See the Geezer Jeep at
>>>http://members.***.net/jerrypb/
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:mXz5f.11749$MN6.9273@fed1read04...
> It's on the passenger-side where the distributor used to be. The
> distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> should still be there being driven off the old distributor shaft IIRC.
>
> Jerry
>
> Fred Garvin wrote:
>> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
>> think. It's on the bell housing. Where's the camshaft sensor?
>>
>> No codes.
>>
>> Thanks!
>> "Jerry Bransford" <jerrypb@***.net> wrote in message
>> news:gRu5f.11727$MN6.7839@fed1read04...
>>
>>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>>working ok?
>>>
>>>Fred Garvin wrote:
>>>
>>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>>no spark?
>>>>
>>>>Anybody have a suggestion of where to go next?
>>>>
>>>>Many thanks!
>>>>
>>>>Fred
>>>>
>>>>
>>>>
>>>
>>>--
>>>Jerry Bransford
>>>PP-ASEL N6TAY
>>>See the Geezer Jeep at
>>>http://members.***.net/jerrypb/
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
#19
Guest
Posts: n/a
Re: No Spark
I'm going after that next. I'll let you know.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:mXz5f.11749$MN6.9273@fed1read04...
> It's on the passenger-side where the distributor used to be. The
> distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> should still be there being driven off the old distributor shaft IIRC.
>
> Jerry
>
> Fred Garvin wrote:
>> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
>> think. It's on the bell housing. Where's the camshaft sensor?
>>
>> No codes.
>>
>> Thanks!
>> "Jerry Bransford" <jerrypb@***.net> wrote in message
>> news:gRu5f.11727$MN6.7839@fed1read04...
>>
>>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>>working ok?
>>>
>>>Fred Garvin wrote:
>>>
>>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>>no spark?
>>>>
>>>>Anybody have a suggestion of where to go next?
>>>>
>>>>Many thanks!
>>>>
>>>>Fred
>>>>
>>>>
>>>>
>>>
>>>--
>>>Jerry Bransford
>>>PP-ASEL N6TAY
>>>See the Geezer Jeep at
>>>http://members.***.net/jerrypb/
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:mXz5f.11749$MN6.9273@fed1read04...
> It's on the passenger-side where the distributor used to be. The
> distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> should still be there being driven off the old distributor shaft IIRC.
>
> Jerry
>
> Fred Garvin wrote:
>> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
>> think. It's on the bell housing. Where's the camshaft sensor?
>>
>> No codes.
>>
>> Thanks!
>> "Jerry Bransford" <jerrypb@***.net> wrote in message
>> news:gRu5f.11727$MN6.7839@fed1read04...
>>
>>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>>working ok?
>>>
>>>Fred Garvin wrote:
>>>
>>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>>no spark?
>>>>
>>>>Anybody have a suggestion of where to go next?
>>>>
>>>>Many thanks!
>>>>
>>>>Fred
>>>>
>>>>
>>>>
>>>
>>>--
>>>Jerry Bransford
>>>PP-ASEL N6TAY
>>>See the Geezer Jeep at
>>>http://members.***.net/jerrypb/
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
#20
Guest
Posts: n/a
Re: No Spark
A broken ground wire can cause no spark. The main ground is a mesh
strap from the engine head to the firewall and the computer grounds are
on a bolt on the passenger side by the oil dipstick.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Fred Garvin wrote:
>
> I'm going after that next. I'll let you know.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:mXz5f.11749$MN6.9273@fed1read04...
> > It's on the passenger-side where the distributor used to be. The
> > distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> > should still be there being driven off the old distributor shaft IIRC.
> >
> > Jerry
> >
> > Fred Garvin wrote:
> >> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> >> think. It's on the bell housing. Where's the camshaft sensor?
> >>
> >> No codes.
> >>
> >> Thanks!
> >> "Jerry Bransford" <jerrypb@***.net> wrote in message
> >> news:gRu5f.11727$MN6.7839@fed1read04...
> >>
> >>>Are you getting any diagnostic codes? Is the camshaft position sensor
> >>>working ok?
> >>>
> >>>Fred Garvin wrote:
> >>>
> >>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> >>>>replaced the Crank Shaft position sensor and ignition coil stip - still
> >>>>no spark?
> >>>>
> >>>>Anybody have a suggestion of where to go next?
> >>>>
> >>>>Many thanks!
> >>>>
> >>>>Fred
> >>>>
> >>>>
> >>>>
> >>>
> >>>--
> >>>Jerry Bransford
> >>>PP-ASEL N6TAY
> >>>See the Geezer Jeep at
> >>>http://members.***.net/jerrypb/
> >>
> >>
> >>
> >
> > --
> > Jerry Bransford
> > PP-ASEL N6TAY
> > See the Geezer Jeep at
> > http://members.***.net/jerrypb/
strap from the engine head to the firewall and the computer grounds are
on a bolt on the passenger side by the oil dipstick.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Fred Garvin wrote:
>
> I'm going after that next. I'll let you know.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:mXz5f.11749$MN6.9273@fed1read04...
> > It's on the passenger-side where the distributor used to be. The
> > distributor is gone on late model TJ 4.0L engines but the camshaft sensor
> > should still be there being driven off the old distributor shaft IIRC.
> >
> > Jerry
> >
> > Fred Garvin wrote:
> >> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> >> think. It's on the bell housing. Where's the camshaft sensor?
> >>
> >> No codes.
> >>
> >> Thanks!
> >> "Jerry Bransford" <jerrypb@***.net> wrote in message
> >> news:gRu5f.11727$MN6.7839@fed1read04...
> >>
> >>>Are you getting any diagnostic codes? Is the camshaft position sensor
> >>>working ok?
> >>>
> >>>Fred Garvin wrote:
> >>>
> >>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> >>>>replaced the Crank Shaft position sensor and ignition coil stip - still
> >>>>no spark?
> >>>>
> >>>>Anybody have a suggestion of where to go next?
> >>>>
> >>>>Many thanks!
> >>>>
> >>>>Fred
> >>>>
> >>>>
> >>>>
> >>>
> >>>--
> >>>Jerry Bransford
> >>>PP-ASEL N6TAY
> >>>See the Geezer Jeep at
> >>>http://members.***.net/jerrypb/
> >>
> >>
> >>
> >
> > --
> > Jerry Bransford
> > PP-ASEL N6TAY
> > See the Geezer Jeep at
> > http://members.***.net/jerrypb/