new key programming problems
Guest
Posts: n/a
Re: new key programming problems
Seems to me I remember something about having to have 2
pre-programmed keys to make more. I only got one with my
Jeep and the dealer charged $80 (40 for parts and 40 for
labor) for another one, which we proceeded to lose...
Seahag
"toxicated101" <matt.wheatley@gmail.com> wrote in message
news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> Hi
>
> I have a 2000 Jeep Wrangler. I have just purchased a key
> from ebay and
> had it cut at my local key cutting store. I have come to
> follow the
> steps but the SKIS indicator light never turns on:
>
> B. Insert original key #1 into ignition and turn to On
> C. Wait 5 seconds and turn key to off
> D. Immediately insert original key # 2 into ignition and
> turn to on
> E. Wait 10 seconds for SKIS indicator in dash starts to
> flash
> F. Turn ignition off, insert new blank key and turn
> ignition back on
> G. Once SKIS light stops flashing and turns off, your new
> key is
> programmed
>
> Both keys I have will start the car, I have put key 1 into
> the ignition
> and turned it it to on (by on I assume its the position
> that you drive
> in rather than the start position) all the indicator light
> show up the
> dash beeps 4 times all light go out, so 5 seconds after
> turning key is
> about the time the beeps stop, turn the key to off (all
> lights go out)
> put the second key in and turn to on, all lights go on, 5
> beeps, lights
> off, continue waiting but the SKIS indicator never starts
> to flash.
>
> Am I doing something wrong , should the jeep beep 4 times
> ( I assumed
> that it is just checking gauges)
>
> Cheers
>
> Matt
>
pre-programmed keys to make more. I only got one with my
Jeep and the dealer charged $80 (40 for parts and 40 for
labor) for another one, which we proceeded to lose...
Seahag
"toxicated101" <matt.wheatley@gmail.com> wrote in message
news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> Hi
>
> I have a 2000 Jeep Wrangler. I have just purchased a key
> from ebay and
> had it cut at my local key cutting store. I have come to
> follow the
> steps but the SKIS indicator light never turns on:
>
> B. Insert original key #1 into ignition and turn to On
> C. Wait 5 seconds and turn key to off
> D. Immediately insert original key # 2 into ignition and
> turn to on
> E. Wait 10 seconds for SKIS indicator in dash starts to
> flash
> F. Turn ignition off, insert new blank key and turn
> ignition back on
> G. Once SKIS light stops flashing and turns off, your new
> key is
> programmed
>
> Both keys I have will start the car, I have put key 1 into
> the ignition
> and turned it it to on (by on I assume its the position
> that you drive
> in rather than the start position) all the indicator light
> show up the
> dash beeps 4 times all light go out, so 5 seconds after
> turning key is
> about the time the beeps stop, turn the key to off (all
> lights go out)
> put the second key in and turn to on, all lights go on, 5
> beeps, lights
> off, continue waiting but the SKIS indicator never starts
> to flash.
>
> Am I doing something wrong , should the jeep beep 4 times
> ( I assumed
> that it is just checking gauges)
>
> Cheers
>
> Matt
>
Guest
Posts: n/a
Re: new key programming problems
Seems to me I remember something about having to have 2
pre-programmed keys to make more. I only got one with my
Jeep and the dealer charged $80 (40 for parts and 40 for
labor) for another one, which we proceeded to lose...
Seahag
"toxicated101" <matt.wheatley@gmail.com> wrote in message
news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> Hi
>
> I have a 2000 Jeep Wrangler. I have just purchased a key
> from ebay and
> had it cut at my local key cutting store. I have come to
> follow the
> steps but the SKIS indicator light never turns on:
>
> B. Insert original key #1 into ignition and turn to On
> C. Wait 5 seconds and turn key to off
> D. Immediately insert original key # 2 into ignition and
> turn to on
> E. Wait 10 seconds for SKIS indicator in dash starts to
> flash
> F. Turn ignition off, insert new blank key and turn
> ignition back on
> G. Once SKIS light stops flashing and turns off, your new
> key is
> programmed
>
> Both keys I have will start the car, I have put key 1 into
> the ignition
> and turned it it to on (by on I assume its the position
> that you drive
> in rather than the start position) all the indicator light
> show up the
> dash beeps 4 times all light go out, so 5 seconds after
> turning key is
> about the time the beeps stop, turn the key to off (all
> lights go out)
> put the second key in and turn to on, all lights go on, 5
> beeps, lights
> off, continue waiting but the SKIS indicator never starts
> to flash.
>
> Am I doing something wrong , should the jeep beep 4 times
> ( I assumed
> that it is just checking gauges)
>
> Cheers
>
> Matt
>
pre-programmed keys to make more. I only got one with my
Jeep and the dealer charged $80 (40 for parts and 40 for
labor) for another one, which we proceeded to lose...
Seahag
"toxicated101" <matt.wheatley@gmail.com> wrote in message
news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> Hi
>
> I have a 2000 Jeep Wrangler. I have just purchased a key
> from ebay and
> had it cut at my local key cutting store. I have come to
> follow the
> steps but the SKIS indicator light never turns on:
>
> B. Insert original key #1 into ignition and turn to On
> C. Wait 5 seconds and turn key to off
> D. Immediately insert original key # 2 into ignition and
> turn to on
> E. Wait 10 seconds for SKIS indicator in dash starts to
> flash
> F. Turn ignition off, insert new blank key and turn
> ignition back on
> G. Once SKIS light stops flashing and turns off, your new
> key is
> programmed
>
> Both keys I have will start the car, I have put key 1 into
> the ignition
> and turned it it to on (by on I assume its the position
> that you drive
> in rather than the start position) all the indicator light
> show up the
> dash beeps 4 times all light go out, so 5 seconds after
> turning key is
> about the time the beeps stop, turn the key to off (all
> lights go out)
> put the second key in and turn to on, all lights go on, 5
> beeps, lights
> off, continue waiting but the SKIS indicator never starts
> to flash.
>
> Am I doing something wrong , should the jeep beep 4 times
> ( I assumed
> that it is just checking gauges)
>
> Cheers
>
> Matt
>
Guest
Posts: n/a
Re: new key programming problems
Seems to me I remember something about having to have 2
pre-programmed keys to make more. I only got one with my
Jeep and the dealer charged $80 (40 for parts and 40 for
labor) for another one, which we proceeded to lose...
Seahag
"toxicated101" <matt.wheatley@gmail.com> wrote in message
news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> Hi
>
> I have a 2000 Jeep Wrangler. I have just purchased a key
> from ebay and
> had it cut at my local key cutting store. I have come to
> follow the
> steps but the SKIS indicator light never turns on:
>
> B. Insert original key #1 into ignition and turn to On
> C. Wait 5 seconds and turn key to off
> D. Immediately insert original key # 2 into ignition and
> turn to on
> E. Wait 10 seconds for SKIS indicator in dash starts to
> flash
> F. Turn ignition off, insert new blank key and turn
> ignition back on
> G. Once SKIS light stops flashing and turns off, your new
> key is
> programmed
>
> Both keys I have will start the car, I have put key 1 into
> the ignition
> and turned it it to on (by on I assume its the position
> that you drive
> in rather than the start position) all the indicator light
> show up the
> dash beeps 4 times all light go out, so 5 seconds after
> turning key is
> about the time the beeps stop, turn the key to off (all
> lights go out)
> put the second key in and turn to on, all lights go on, 5
> beeps, lights
> off, continue waiting but the SKIS indicator never starts
> to flash.
>
> Am I doing something wrong , should the jeep beep 4 times
> ( I assumed
> that it is just checking gauges)
>
> Cheers
>
> Matt
>
pre-programmed keys to make more. I only got one with my
Jeep and the dealer charged $80 (40 for parts and 40 for
labor) for another one, which we proceeded to lose...
Seahag
"toxicated101" <matt.wheatley@gmail.com> wrote in message
news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> Hi
>
> I have a 2000 Jeep Wrangler. I have just purchased a key
> from ebay and
> had it cut at my local key cutting store. I have come to
> follow the
> steps but the SKIS indicator light never turns on:
>
> B. Insert original key #1 into ignition and turn to On
> C. Wait 5 seconds and turn key to off
> D. Immediately insert original key # 2 into ignition and
> turn to on
> E. Wait 10 seconds for SKIS indicator in dash starts to
> flash
> F. Turn ignition off, insert new blank key and turn
> ignition back on
> G. Once SKIS light stops flashing and turns off, your new
> key is
> programmed
>
> Both keys I have will start the car, I have put key 1 into
> the ignition
> and turned it it to on (by on I assume its the position
> that you drive
> in rather than the start position) all the indicator light
> show up the
> dash beeps 4 times all light go out, so 5 seconds after
> turning key is
> about the time the beeps stop, turn the key to off (all
> lights go out)
> put the second key in and turn to on, all lights go on, 5
> beeps, lights
> off, continue waiting but the SKIS indicator never starts
> to flash.
>
> Am I doing something wrong , should the jeep beep 4 times
> ( I assumed
> that it is just checking gauges)
>
> Cheers
>
> Matt
>
Guest
Posts: n/a
Re: new key programming problems
Mine required just one pre-programmed key to get the new one working.
Seahag wrote:
> Seems to me I remember something about having to have 2
> pre-programmed keys to make more. I only got one with my
> Jeep and the dealer charged $80 (40 for parts and 40 for
> labor) for another one, which we proceeded to lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key
>> from ebay and
>> had it cut at my local key cutting store. I have come to
>> follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and
>> turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to
>> flash
>> F. Turn ignition off, insert new blank key and turn
>> ignition back on
>> G. Once SKIS light stops flashing and turns off, your new
>> key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into
>> the ignition
>> and turned it it to on (by on I assume its the position
>> that you drive
>> in rather than the start position) all the indicator light
>> show up the
>> dash beeps 4 times all light go out, so 5 seconds after
>> turning key is
>> about the time the beeps stop, turn the key to off (all
>> lights go out)
>> put the second key in and turn to on, all lights go on, 5
>> beeps, lights
>> off, continue waiting but the SKIS indicator never starts
>> to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times
>> ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Seahag wrote:
> Seems to me I remember something about having to have 2
> pre-programmed keys to make more. I only got one with my
> Jeep and the dealer charged $80 (40 for parts and 40 for
> labor) for another one, which we proceeded to lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key
>> from ebay and
>> had it cut at my local key cutting store. I have come to
>> follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and
>> turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to
>> flash
>> F. Turn ignition off, insert new blank key and turn
>> ignition back on
>> G. Once SKIS light stops flashing and turns off, your new
>> key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into
>> the ignition
>> and turned it it to on (by on I assume its the position
>> that you drive
>> in rather than the start position) all the indicator light
>> show up the
>> dash beeps 4 times all light go out, so 5 seconds after
>> turning key is
>> about the time the beeps stop, turn the key to off (all
>> lights go out)
>> put the second key in and turn to on, all lights go on, 5
>> beeps, lights
>> off, continue waiting but the SKIS indicator never starts
>> to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times
>> ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new key programming problems
Mine required just one pre-programmed key to get the new one working.
Seahag wrote:
> Seems to me I remember something about having to have 2
> pre-programmed keys to make more. I only got one with my
> Jeep and the dealer charged $80 (40 for parts and 40 for
> labor) for another one, which we proceeded to lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key
>> from ebay and
>> had it cut at my local key cutting store. I have come to
>> follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and
>> turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to
>> flash
>> F. Turn ignition off, insert new blank key and turn
>> ignition back on
>> G. Once SKIS light stops flashing and turns off, your new
>> key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into
>> the ignition
>> and turned it it to on (by on I assume its the position
>> that you drive
>> in rather than the start position) all the indicator light
>> show up the
>> dash beeps 4 times all light go out, so 5 seconds after
>> turning key is
>> about the time the beeps stop, turn the key to off (all
>> lights go out)
>> put the second key in and turn to on, all lights go on, 5
>> beeps, lights
>> off, continue waiting but the SKIS indicator never starts
>> to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times
>> ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Seahag wrote:
> Seems to me I remember something about having to have 2
> pre-programmed keys to make more. I only got one with my
> Jeep and the dealer charged $80 (40 for parts and 40 for
> labor) for another one, which we proceeded to lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key
>> from ebay and
>> had it cut at my local key cutting store. I have come to
>> follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and
>> turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to
>> flash
>> F. Turn ignition off, insert new blank key and turn
>> ignition back on
>> G. Once SKIS light stops flashing and turns off, your new
>> key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into
>> the ignition
>> and turned it it to on (by on I assume its the position
>> that you drive
>> in rather than the start position) all the indicator light
>> show up the
>> dash beeps 4 times all light go out, so 5 seconds after
>> turning key is
>> about the time the beeps stop, turn the key to off (all
>> lights go out)
>> put the second key in and turn to on, all lights go on, 5
>> beeps, lights
>> off, continue waiting but the SKIS indicator never starts
>> to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times
>> ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new key programming problems
Mine required just one pre-programmed key to get the new one working.
Seahag wrote:
> Seems to me I remember something about having to have 2
> pre-programmed keys to make more. I only got one with my
> Jeep and the dealer charged $80 (40 for parts and 40 for
> labor) for another one, which we proceeded to lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key
>> from ebay and
>> had it cut at my local key cutting store. I have come to
>> follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and
>> turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to
>> flash
>> F. Turn ignition off, insert new blank key and turn
>> ignition back on
>> G. Once SKIS light stops flashing and turns off, your new
>> key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into
>> the ignition
>> and turned it it to on (by on I assume its the position
>> that you drive
>> in rather than the start position) all the indicator light
>> show up the
>> dash beeps 4 times all light go out, so 5 seconds after
>> turning key is
>> about the time the beeps stop, turn the key to off (all
>> lights go out)
>> put the second key in and turn to on, all lights go on, 5
>> beeps, lights
>> off, continue waiting but the SKIS indicator never starts
>> to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times
>> ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Seahag wrote:
> Seems to me I remember something about having to have 2
> pre-programmed keys to make more. I only got one with my
> Jeep and the dealer charged $80 (40 for parts and 40 for
> labor) for another one, which we proceeded to lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key
>> from ebay and
>> had it cut at my local key cutting store. I have come to
>> follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and
>> turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to
>> flash
>> F. Turn ignition off, insert new blank key and turn
>> ignition back on
>> G. Once SKIS light stops flashing and turns off, your new
>> key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into
>> the ignition
>> and turned it it to on (by on I assume its the position
>> that you drive
>> in rather than the start position) all the indicator light
>> show up the
>> dash beeps 4 times all light go out, so 5 seconds after
>> turning key is
>> about the time the beeps stop, turn the key to off (all
>> lights go out)
>> put the second key in and turn to on, all lights go on, 5
>> beeps, lights
>> off, continue waiting but the SKIS indicator never starts
>> to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times
>> ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new key programming problems
What am I missing? He says both keys will now start the engine....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Jerry Bransford wrote:
>
> Mine required just one pre-programmed key to get the new one working.
>
> Seahag wrote:
> > Seems to me I remember something about having to have 2
> > pre-programmed keys to make more. I only got one with my
> > Jeep and the dealer charged $80 (40 for parts and 40 for
> > labor) for another one, which we proceeded to lose...
> >
> > Seahag
> >
> > "toxicated101" <matt.wheatley@gmail.com> wrote in message
> > news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> >> Hi
> >>
> >> I have a 2000 Jeep Wrangler. I have just purchased a key
> >> from ebay and
> >> had it cut at my local key cutting store. I have come to
> >> follow the
> >> steps but the SKIS indicator light never turns on:
> >>
> >> B. Insert original key #1 into ignition and turn to On
> >> C. Wait 5 seconds and turn key to off
> >> D. Immediately insert original key # 2 into ignition and
> >> turn to on
> >> E. Wait 10 seconds for SKIS indicator in dash starts to
> >> flash
> >> F. Turn ignition off, insert new blank key and turn
> >> ignition back on
> >> G. Once SKIS light stops flashing and turns off, your new
> >> key is
> >> programmed
> >>
> >> Both keys I have will start the car, I have put key 1 into
> >> the ignition
> >> and turned it it to on (by on I assume its the position
> >> that you drive
> >> in rather than the start position) all the indicator light
> >> show up the
> >> dash beeps 4 times all light go out, so 5 seconds after
> >> turning key is
> >> about the time the beeps stop, turn the key to off (all
> >> lights go out)
> >> put the second key in and turn to on, all lights go on, 5
> >> beeps, lights
> >> off, continue waiting but the SKIS indicator never starts
> >> to flash.
> >>
> >> Am I doing something wrong , should the jeep beep 4 times
> >> ( I assumed
> >> that it is just checking gauges)
> >>
> >> Cheers
> >>
> >> Matt
> >>
> >
> >
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Jerry Bransford wrote:
>
> Mine required just one pre-programmed key to get the new one working.
>
> Seahag wrote:
> > Seems to me I remember something about having to have 2
> > pre-programmed keys to make more. I only got one with my
> > Jeep and the dealer charged $80 (40 for parts and 40 for
> > labor) for another one, which we proceeded to lose...
> >
> > Seahag
> >
> > "toxicated101" <matt.wheatley@gmail.com> wrote in message
> > news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> >> Hi
> >>
> >> I have a 2000 Jeep Wrangler. I have just purchased a key
> >> from ebay and
> >> had it cut at my local key cutting store. I have come to
> >> follow the
> >> steps but the SKIS indicator light never turns on:
> >>
> >> B. Insert original key #1 into ignition and turn to On
> >> C. Wait 5 seconds and turn key to off
> >> D. Immediately insert original key # 2 into ignition and
> >> turn to on
> >> E. Wait 10 seconds for SKIS indicator in dash starts to
> >> flash
> >> F. Turn ignition off, insert new blank key and turn
> >> ignition back on
> >> G. Once SKIS light stops flashing and turns off, your new
> >> key is
> >> programmed
> >>
> >> Both keys I have will start the car, I have put key 1 into
> >> the ignition
> >> and turned it it to on (by on I assume its the position
> >> that you drive
> >> in rather than the start position) all the indicator light
> >> show up the
> >> dash beeps 4 times all light go out, so 5 seconds after
> >> turning key is
> >> about the time the beeps stop, turn the key to off (all
> >> lights go out)
> >> put the second key in and turn to on, all lights go on, 5
> >> beeps, lights
> >> off, continue waiting but the SKIS indicator never starts
> >> to flash.
> >>
> >> Am I doing something wrong , should the jeep beep 4 times
> >> ( I assumed
> >> that it is just checking gauges)
> >>
> >> Cheers
> >>
> >> Matt
> >>
> >
> >
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new key programming problems
What am I missing? He says both keys will now start the engine....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Jerry Bransford wrote:
>
> Mine required just one pre-programmed key to get the new one working.
>
> Seahag wrote:
> > Seems to me I remember something about having to have 2
> > pre-programmed keys to make more. I only got one with my
> > Jeep and the dealer charged $80 (40 for parts and 40 for
> > labor) for another one, which we proceeded to lose...
> >
> > Seahag
> >
> > "toxicated101" <matt.wheatley@gmail.com> wrote in message
> > news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> >> Hi
> >>
> >> I have a 2000 Jeep Wrangler. I have just purchased a key
> >> from ebay and
> >> had it cut at my local key cutting store. I have come to
> >> follow the
> >> steps but the SKIS indicator light never turns on:
> >>
> >> B. Insert original key #1 into ignition and turn to On
> >> C. Wait 5 seconds and turn key to off
> >> D. Immediately insert original key # 2 into ignition and
> >> turn to on
> >> E. Wait 10 seconds for SKIS indicator in dash starts to
> >> flash
> >> F. Turn ignition off, insert new blank key and turn
> >> ignition back on
> >> G. Once SKIS light stops flashing and turns off, your new
> >> key is
> >> programmed
> >>
> >> Both keys I have will start the car, I have put key 1 into
> >> the ignition
> >> and turned it it to on (by on I assume its the position
> >> that you drive
> >> in rather than the start position) all the indicator light
> >> show up the
> >> dash beeps 4 times all light go out, so 5 seconds after
> >> turning key is
> >> about the time the beeps stop, turn the key to off (all
> >> lights go out)
> >> put the second key in and turn to on, all lights go on, 5
> >> beeps, lights
> >> off, continue waiting but the SKIS indicator never starts
> >> to flash.
> >>
> >> Am I doing something wrong , should the jeep beep 4 times
> >> ( I assumed
> >> that it is just checking gauges)
> >>
> >> Cheers
> >>
> >> Matt
> >>
> >
> >
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Jerry Bransford wrote:
>
> Mine required just one pre-programmed key to get the new one working.
>
> Seahag wrote:
> > Seems to me I remember something about having to have 2
> > pre-programmed keys to make more. I only got one with my
> > Jeep and the dealer charged $80 (40 for parts and 40 for
> > labor) for another one, which we proceeded to lose...
> >
> > Seahag
> >
> > "toxicated101" <matt.wheatley@gmail.com> wrote in message
> > news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> >> Hi
> >>
> >> I have a 2000 Jeep Wrangler. I have just purchased a key
> >> from ebay and
> >> had it cut at my local key cutting store. I have come to
> >> follow the
> >> steps but the SKIS indicator light never turns on:
> >>
> >> B. Insert original key #1 into ignition and turn to On
> >> C. Wait 5 seconds and turn key to off
> >> D. Immediately insert original key # 2 into ignition and
> >> turn to on
> >> E. Wait 10 seconds for SKIS indicator in dash starts to
> >> flash
> >> F. Turn ignition off, insert new blank key and turn
> >> ignition back on
> >> G. Once SKIS light stops flashing and turns off, your new
> >> key is
> >> programmed
> >>
> >> Both keys I have will start the car, I have put key 1 into
> >> the ignition
> >> and turned it it to on (by on I assume its the position
> >> that you drive
> >> in rather than the start position) all the indicator light
> >> show up the
> >> dash beeps 4 times all light go out, so 5 seconds after
> >> turning key is
> >> about the time the beeps stop, turn the key to off (all
> >> lights go out)
> >> put the second key in and turn to on, all lights go on, 5
> >> beeps, lights
> >> off, continue waiting but the SKIS indicator never starts
> >> to flash.
> >>
> >> Am I doing something wrong , should the jeep beep 4 times
> >> ( I assumed
> >> that it is just checking gauges)
> >>
> >> Cheers
> >>
> >> Matt
> >>
> >
> >
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new key programming problems
What am I missing? He says both keys will now start the engine....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Jerry Bransford wrote:
>
> Mine required just one pre-programmed key to get the new one working.
>
> Seahag wrote:
> > Seems to me I remember something about having to have 2
> > pre-programmed keys to make more. I only got one with my
> > Jeep and the dealer charged $80 (40 for parts and 40 for
> > labor) for another one, which we proceeded to lose...
> >
> > Seahag
> >
> > "toxicated101" <matt.wheatley@gmail.com> wrote in message
> > news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> >> Hi
> >>
> >> I have a 2000 Jeep Wrangler. I have just purchased a key
> >> from ebay and
> >> had it cut at my local key cutting store. I have come to
> >> follow the
> >> steps but the SKIS indicator light never turns on:
> >>
> >> B. Insert original key #1 into ignition and turn to On
> >> C. Wait 5 seconds and turn key to off
> >> D. Immediately insert original key # 2 into ignition and
> >> turn to on
> >> E. Wait 10 seconds for SKIS indicator in dash starts to
> >> flash
> >> F. Turn ignition off, insert new blank key and turn
> >> ignition back on
> >> G. Once SKIS light stops flashing and turns off, your new
> >> key is
> >> programmed
> >>
> >> Both keys I have will start the car, I have put key 1 into
> >> the ignition
> >> and turned it it to on (by on I assume its the position
> >> that you drive
> >> in rather than the start position) all the indicator light
> >> show up the
> >> dash beeps 4 times all light go out, so 5 seconds after
> >> turning key is
> >> about the time the beeps stop, turn the key to off (all
> >> lights go out)
> >> put the second key in and turn to on, all lights go on, 5
> >> beeps, lights
> >> off, continue waiting but the SKIS indicator never starts
> >> to flash.
> >>
> >> Am I doing something wrong , should the jeep beep 4 times
> >> ( I assumed
> >> that it is just checking gauges)
> >>
> >> Cheers
> >>
> >> Matt
> >>
> >
> >
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Jerry Bransford wrote:
>
> Mine required just one pre-programmed key to get the new one working.
>
> Seahag wrote:
> > Seems to me I remember something about having to have 2
> > pre-programmed keys to make more. I only got one with my
> > Jeep and the dealer charged $80 (40 for parts and 40 for
> > labor) for another one, which we proceeded to lose...
> >
> > Seahag
> >
> > "toxicated101" <matt.wheatley@gmail.com> wrote in message
> > news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
> >> Hi
> >>
> >> I have a 2000 Jeep Wrangler. I have just purchased a key
> >> from ebay and
> >> had it cut at my local key cutting store. I have come to
> >> follow the
> >> steps but the SKIS indicator light never turns on:
> >>
> >> B. Insert original key #1 into ignition and turn to On
> >> C. Wait 5 seconds and turn key to off
> >> D. Immediately insert original key # 2 into ignition and
> >> turn to on
> >> E. Wait 10 seconds for SKIS indicator in dash starts to
> >> flash
> >> F. Turn ignition off, insert new blank key and turn
> >> ignition back on
> >> G. Once SKIS light stops flashing and turns off, your new
> >> key is
> >> programmed
> >>
> >> Both keys I have will start the car, I have put key 1 into
> >> the ignition
> >> and turned it it to on (by on I assume its the position
> >> that you drive
> >> in rather than the start position) all the indicator light
> >> show up the
> >> dash beeps 4 times all light go out, so 5 seconds after
> >> turning key is
> >> about the time the beeps stop, turn the key to off (all
> >> lights go out)
> >> put the second key in and turn to on, all lights go on, 5
> >> beeps, lights
> >> off, continue waiting but the SKIS indicator never starts
> >> to flash.
> >>
> >> Am I doing something wrong , should the jeep beep 4 times
> >> ( I assumed
> >> that it is just checking gauges)
> >>
> >> Cheers
> >>
> >> Matt
> >>
> >
> >
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new key programming problems
I only got 1 key when I bought my WJ. I bought two blank transponder keys
on eBay and then had a local locksmith cut and program the first key with
their computer interface machine using the SKIM code I got from the Jeep
dealership PARTS department. The cutting and programming cost $24.99 and
the key blanks were $11.99 each.
I then programmed the second key myself after getting it cut by using the
directions on http://www.wjjeeps.com/sentry.htm#PROGRAM
I would recommend following the "Quick Steps" as the extra information in
the "Detailed Steps' initially led to some confusion.
Quick Steps:
A. Purchase a blank key and have it cut
B. Insert original key #1 into ignition and turn to On
C. Wait 5 seconds and turn key to off
D. Immediately insert original key # 2 into ignition and turn to on
E. Wait 10 seconds for SKIS indicator in dash starts to flash
F. Turn ignition off, insert new blank key and turn ignition back on
G. Once SKIS light stops flashing and turns off, your new key is programmed
"Seahag" <Seahag@toadymail.net> wrote in message
news:44bd7770_2@newsfeed.slurp.net...
> Seems to me I remember something about having to have 2 pre-programmed
> keys to make more. I only got one with my Jeep and the dealer charged $80
> (40 for parts and 40 for labor) for another one, which we proceeded to
> lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key from ebay and
>> had it cut at my local key cutting store. I have come to follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to flash
>> F. Turn ignition off, insert new blank key and turn ignition back on
>> G. Once SKIS light stops flashing and turns off, your new key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into the ignition
>> and turned it it to on (by on I assume its the position that you drive
>> in rather than the start position) all the indicator light show up the
>> dash beeps 4 times all light go out, so 5 seconds after turning key is
>> about the time the beeps stop, turn the key to off (all lights go out)
>> put the second key in and turn to on, all lights go on, 5 beeps, lights
>> off, continue waiting but the SKIS indicator never starts to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>
on eBay and then had a local locksmith cut and program the first key with
their computer interface machine using the SKIM code I got from the Jeep
dealership PARTS department. The cutting and programming cost $24.99 and
the key blanks were $11.99 each.
I then programmed the second key myself after getting it cut by using the
directions on http://www.wjjeeps.com/sentry.htm#PROGRAM
I would recommend following the "Quick Steps" as the extra information in
the "Detailed Steps' initially led to some confusion.
Quick Steps:
A. Purchase a blank key and have it cut
B. Insert original key #1 into ignition and turn to On
C. Wait 5 seconds and turn key to off
D. Immediately insert original key # 2 into ignition and turn to on
E. Wait 10 seconds for SKIS indicator in dash starts to flash
F. Turn ignition off, insert new blank key and turn ignition back on
G. Once SKIS light stops flashing and turns off, your new key is programmed
"Seahag" <Seahag@toadymail.net> wrote in message
news:44bd7770_2@newsfeed.slurp.net...
> Seems to me I remember something about having to have 2 pre-programmed
> keys to make more. I only got one with my Jeep and the dealer charged $80
> (40 for parts and 40 for labor) for another one, which we proceeded to
> lose...
>
> Seahag
>
> "toxicated101" <matt.wheatley@gmail.com> wrote in message
> news:1153250560.400565.74140@b28g2000cwb.googlegro ups.com...
>> Hi
>>
>> I have a 2000 Jeep Wrangler. I have just purchased a key from ebay and
>> had it cut at my local key cutting store. I have come to follow the
>> steps but the SKIS indicator light never turns on:
>>
>> B. Insert original key #1 into ignition and turn to On
>> C. Wait 5 seconds and turn key to off
>> D. Immediately insert original key # 2 into ignition and turn to on
>> E. Wait 10 seconds for SKIS indicator in dash starts to flash
>> F. Turn ignition off, insert new blank key and turn ignition back on
>> G. Once SKIS light stops flashing and turns off, your new key is
>> programmed
>>
>> Both keys I have will start the car, I have put key 1 into the ignition
>> and turned it it to on (by on I assume its the position that you drive
>> in rather than the start position) all the indicator light show up the
>> dash beeps 4 times all light go out, so 5 seconds after turning key is
>> about the time the beeps stop, turn the key to off (all lights go out)
>> put the second key in and turn to on, all lights go on, 5 beeps, lights
>> off, continue waiting but the SKIS indicator never starts to flash.
>>
>> Am I doing something wrong , should the jeep beep 4 times ( I assumed
>> that it is just checking gauges)
>>
>> Cheers
>>
>> Matt
>>
>
>