MTBE to Ethanol additive change-over ..PROBLEMS
01-04-2006, 11:52 AM
#1
Guest
Posts: n/a
MTBE to Ethanol additive change-over ..PROBLEMS
although this affects mainly boats, I thought I'd cross post this here
in case any of you have a fiberglass fuel tank.
There are great 'problems' showing up due to the 'changeover' of
gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
and leaking, harmful destructive deposits formed inside engines, etc.
About half the USA states have already banned MTBE additive and are
rapidly changing over to an ethanol additive, the ethanol is quite
incompatible with most of the fiberglass resin used in fuel tanks. The
decomposition products of the 'melting/dissolving' resin doesnt burn
and will form vast and destructive deposits in the engine (similar to
putting sugar into the gasoline).
for more info:
http://www.moyermarine.com/forums/at...ttachmentid=42
or BOATUS.com website.
in case any of you have a fiberglass fuel tank.
There are great 'problems' showing up due to the 'changeover' of
gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
and leaking, harmful destructive deposits formed inside engines, etc.
About half the USA states have already banned MTBE additive and are
rapidly changing over to an ethanol additive, the ethanol is quite
incompatible with most of the fiberglass resin used in fuel tanks. The
decomposition products of the 'melting/dissolving' resin doesnt burn
and will form vast and destructive deposits in the engine (similar to
putting sugar into the gasoline).
for more info:
http://www.moyermarine.com/forums/at...ttachmentid=42
or BOATUS.com website.
01-04-2006, 11:55 AM
#2
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
Jeeps use steel or polyethylene fuel tanks.
Earle
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061152437988%RhmpL33@nospam.net...
> although this affects mainly boats, I thought I'd cross post this here
> in case any of you have a fiberglass fuel tank.
>
> There are great 'problems' showing up due to the 'changeover' of
> gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> and leaking, harmful destructive deposits formed inside engines, etc.
> About half the USA states have already banned MTBE additive and are
> rapidly changing over to an ethanol additive, the ethanol is quite
> incompatible with most of the fiberglass resin used in fuel tanks. The
> decomposition products of the 'melting/dissolving' resin doesnt burn
> and will form vast and destructive deposits in the engine (similar to
> putting sugar into the gasoline).
>
> for more info:
> http://www.moyermarine.com/forums/at...ttachmentid=42
> or BOATUS.com website.
Earle
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061152437988%RhmpL33@nospam.net...
> although this affects mainly boats, I thought I'd cross post this here
> in case any of you have a fiberglass fuel tank.
>
> There are great 'problems' showing up due to the 'changeover' of
> gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> and leaking, harmful destructive deposits formed inside engines, etc.
> About half the USA states have already banned MTBE additive and are
> rapidly changing over to an ethanol additive, the ethanol is quite
> incompatible with most of the fiberglass resin used in fuel tanks. The
> decomposition products of the 'melting/dissolving' resin doesnt burn
> and will form vast and destructive deposits in the engine (similar to
> putting sugar into the gasoline).
>
> for more info:
> http://www.moyermarine.com/forums/at...ttachmentid=42
> or BOATUS.com website.
01-04-2006, 11:55 AM
#3
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
Jeeps use steel or polyethylene fuel tanks.
Earle
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061152437988%RhmpL33@nospam.net...
> although this affects mainly boats, I thought I'd cross post this here
> in case any of you have a fiberglass fuel tank.
>
> There are great 'problems' showing up due to the 'changeover' of
> gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> and leaking, harmful destructive deposits formed inside engines, etc.
> About half the USA states have already banned MTBE additive and are
> rapidly changing over to an ethanol additive, the ethanol is quite
> incompatible with most of the fiberglass resin used in fuel tanks. The
> decomposition products of the 'melting/dissolving' resin doesnt burn
> and will form vast and destructive deposits in the engine (similar to
> putting sugar into the gasoline).
>
> for more info:
> http://www.moyermarine.com/forums/at...ttachmentid=42
> or BOATUS.com website.
Earle
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061152437988%RhmpL33@nospam.net...
> although this affects mainly boats, I thought I'd cross post this here
> in case any of you have a fiberglass fuel tank.
>
> There are great 'problems' showing up due to the 'changeover' of
> gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> and leaking, harmful destructive deposits formed inside engines, etc.
> About half the USA states have already banned MTBE additive and are
> rapidly changing over to an ethanol additive, the ethanol is quite
> incompatible with most of the fiberglass resin used in fuel tanks. The
> decomposition products of the 'melting/dissolving' resin doesnt burn
> and will form vast and destructive deposits in the engine (similar to
> putting sugar into the gasoline).
>
> for more info:
> http://www.moyermarine.com/forums/at...ttachmentid=42
> or BOATUS.com website.
01-04-2006, 11:55 AM
#4
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
Jeeps use steel or polyethylene fuel tanks.
Earle
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061152437988%RhmpL33@nospam.net...
> although this affects mainly boats, I thought I'd cross post this here
> in case any of you have a fiberglass fuel tank.
>
> There are great 'problems' showing up due to the 'changeover' of
> gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> and leaking, harmful destructive deposits formed inside engines, etc.
> About half the USA states have already banned MTBE additive and are
> rapidly changing over to an ethanol additive, the ethanol is quite
> incompatible with most of the fiberglass resin used in fuel tanks. The
> decomposition products of the 'melting/dissolving' resin doesnt burn
> and will form vast and destructive deposits in the engine (similar to
> putting sugar into the gasoline).
>
> for more info:
> http://www.moyermarine.com/forums/at...ttachmentid=42
> or BOATUS.com website.
Earle
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061152437988%RhmpL33@nospam.net...
> although this affects mainly boats, I thought I'd cross post this here
> in case any of you have a fiberglass fuel tank.
>
> There are great 'problems' showing up due to the 'changeover' of
> gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> and leaking, harmful destructive deposits formed inside engines, etc.
> About half the USA states have already banned MTBE additive and are
> rapidly changing over to an ethanol additive, the ethanol is quite
> incompatible with most of the fiberglass resin used in fuel tanks. The
> decomposition products of the 'melting/dissolving' resin doesnt burn
> and will form vast and destructive deposits in the engine (similar to
> putting sugar into the gasoline).
>
> for more info:
> http://www.moyermarine.com/forums/at...ttachmentid=42
> or BOATUS.com website.
01-04-2006, 01:47 PM
#5
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
Yes I know but some of you may have applied retro glass tanks.
In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
<NurseBustersNoSpam@msn.com> wrote:
> Jeeps use steel or polyethylene fuel tanks.
>
> Earle
>
> "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> news:040120061152437988%RhmpL33@nospam.net...
> > although this affects mainly boats, I thought I'd cross post this here
> > in case any of you have a fiberglass fuel tank.
> >
> > There are great 'problems' showing up due to the 'changeover' of
> > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > and leaking, harmful destructive deposits formed inside engines, etc.
> > About half the USA states have already banned MTBE additive and are
> > rapidly changing over to an ethanol additive, the ethanol is quite
> > incompatible with most of the fiberglass resin used in fuel tanks. The
> > decomposition products of the 'melting/dissolving' resin doesnt burn
> > and will form vast and destructive deposits in the engine (similar to
> > putting sugar into the gasoline).
> >
> > for more info:
> > http://www.moyermarine.com/forums/at...ttachmentid=42
> > or BOATUS.com website.
>
>
In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
<NurseBustersNoSpam@msn.com> wrote:
> Jeeps use steel or polyethylene fuel tanks.
>
> Earle
>
> "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> news:040120061152437988%RhmpL33@nospam.net...
> > although this affects mainly boats, I thought I'd cross post this here
> > in case any of you have a fiberglass fuel tank.
> >
> > There are great 'problems' showing up due to the 'changeover' of
> > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > and leaking, harmful destructive deposits formed inside engines, etc.
> > About half the USA states have already banned MTBE additive and are
> > rapidly changing over to an ethanol additive, the ethanol is quite
> > incompatible with most of the fiberglass resin used in fuel tanks. The
> > decomposition products of the 'melting/dissolving' resin doesnt burn
> > and will form vast and destructive deposits in the engine (similar to
> > putting sugar into the gasoline).
> >
> > for more info:
> > http://www.moyermarine.com/forums/at...ttachmentid=42
> > or BOATUS.com website.
>
>
01-04-2006, 01:47 PM
#6
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
Yes I know but some of you may have applied retro glass tanks.
In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
<NurseBustersNoSpam@msn.com> wrote:
> Jeeps use steel or polyethylene fuel tanks.
>
> Earle
>
> "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> news:040120061152437988%RhmpL33@nospam.net...
> > although this affects mainly boats, I thought I'd cross post this here
> > in case any of you have a fiberglass fuel tank.
> >
> > There are great 'problems' showing up due to the 'changeover' of
> > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > and leaking, harmful destructive deposits formed inside engines, etc.
> > About half the USA states have already banned MTBE additive and are
> > rapidly changing over to an ethanol additive, the ethanol is quite
> > incompatible with most of the fiberglass resin used in fuel tanks. The
> > decomposition products of the 'melting/dissolving' resin doesnt burn
> > and will form vast and destructive deposits in the engine (similar to
> > putting sugar into the gasoline).
> >
> > for more info:
> > http://www.moyermarine.com/forums/at...ttachmentid=42
> > or BOATUS.com website.
>
>
In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
<NurseBustersNoSpam@msn.com> wrote:
> Jeeps use steel or polyethylene fuel tanks.
>
> Earle
>
> "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> news:040120061152437988%RhmpL33@nospam.net...
> > although this affects mainly boats, I thought I'd cross post this here
> > in case any of you have a fiberglass fuel tank.
> >
> > There are great 'problems' showing up due to the 'changeover' of
> > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > and leaking, harmful destructive deposits formed inside engines, etc.
> > About half the USA states have already banned MTBE additive and are
> > rapidly changing over to an ethanol additive, the ethanol is quite
> > incompatible with most of the fiberglass resin used in fuel tanks. The
> > decomposition products of the 'melting/dissolving' resin doesnt burn
> > and will form vast and destructive deposits in the engine (similar to
> > putting sugar into the gasoline).
> >
> > for more info:
> > http://www.moyermarine.com/forums/at...ttachmentid=42
> > or BOATUS.com website.
>
>
01-04-2006, 01:47 PM
#7
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
Yes I know but some of you may have applied retro glass tanks.
In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
<NurseBustersNoSpam@msn.com> wrote:
> Jeeps use steel or polyethylene fuel tanks.
>
> Earle
>
> "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> news:040120061152437988%RhmpL33@nospam.net...
> > although this affects mainly boats, I thought I'd cross post this here
> > in case any of you have a fiberglass fuel tank.
> >
> > There are great 'problems' showing up due to the 'changeover' of
> > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > and leaking, harmful destructive deposits formed inside engines, etc.
> > About half the USA states have already banned MTBE additive and are
> > rapidly changing over to an ethanol additive, the ethanol is quite
> > incompatible with most of the fiberglass resin used in fuel tanks. The
> > decomposition products of the 'melting/dissolving' resin doesnt burn
> > and will form vast and destructive deposits in the engine (similar to
> > putting sugar into the gasoline).
> >
> > for more info:
> > http://www.moyermarine.com/forums/at...ttachmentid=42
> > or BOATUS.com website.
>
>
In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
<NurseBustersNoSpam@msn.com> wrote:
> Jeeps use steel or polyethylene fuel tanks.
>
> Earle
>
> "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> news:040120061152437988%RhmpL33@nospam.net...
> > although this affects mainly boats, I thought I'd cross post this here
> > in case any of you have a fiberglass fuel tank.
> >
> > There are great 'problems' showing up due to the 'changeover' of
> > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > and leaking, harmful destructive deposits formed inside engines, etc.
> > About half the USA states have already banned MTBE additive and are
> > rapidly changing over to an ethanol additive, the ethanol is quite
> > incompatible with most of the fiberglass resin used in fuel tanks. The
> > decomposition products of the 'melting/dissolving' resin doesnt burn
> > and will form vast and destructive deposits in the engine (similar to
> > putting sugar into the gasoline).
> >
> > for more info:
> > http://www.moyermarine.com/forums/at...ttachmentid=42
> > or BOATUS.com website.
>
>
01-04-2006, 04:40 PM
#8
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
sounds unsafe - easy to crack in an accident...
Dave
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061347308539%RhmpL33@nospam.net...
> Yes I know but some of you may have applied retro glass tanks.
>
> In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
> <NurseBustersNoSpam@msn.com> wrote:
>
> > Jeeps use steel or polyethylene fuel tanks.
> >
> > Earle
> >
> > "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> > news:040120061152437988%RhmpL33@nospam.net...
> > > although this affects mainly boats, I thought I'd cross post this here
> > > in case any of you have a fiberglass fuel tank.
> > >
> > > There are great 'problems' showing up due to the 'changeover' of
> > > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > > and leaking, harmful destructive deposits formed inside engines, etc.
> > > About half the USA states have already banned MTBE additive and are
> > > rapidly changing over to an ethanol additive, the ethanol is quite
> > > incompatible with most of the fiberglass resin used in fuel tanks.
The
> > > decomposition products of the 'melting/dissolving' resin doesnt burn
> > > and will form vast and destructive deposits in the engine (similar to
> > > putting sugar into the gasoline).
> > >
> > > for more info:
> > > http://www.moyermarine.com/forums/at...ttachmentid=42
> > > or BOATUS.com website.
> >
> >
Dave
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061347308539%RhmpL33@nospam.net...
> Yes I know but some of you may have applied retro glass tanks.
>
> In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
> <NurseBustersNoSpam@msn.com> wrote:
>
> > Jeeps use steel or polyethylene fuel tanks.
> >
> > Earle
> >
> > "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> > news:040120061152437988%RhmpL33@nospam.net...
> > > although this affects mainly boats, I thought I'd cross post this here
> > > in case any of you have a fiberglass fuel tank.
> > >
> > > There are great 'problems' showing up due to the 'changeover' of
> > > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > > and leaking, harmful destructive deposits formed inside engines, etc.
> > > About half the USA states have already banned MTBE additive and are
> > > rapidly changing over to an ethanol additive, the ethanol is quite
> > > incompatible with most of the fiberglass resin used in fuel tanks.
The
> > > decomposition products of the 'melting/dissolving' resin doesnt burn
> > > and will form vast and destructive deposits in the engine (similar to
> > > putting sugar into the gasoline).
> > >
> > > for more info:
> > > http://www.moyermarine.com/forums/at...ttachmentid=42
> > > or BOATUS.com website.
> >
> >
01-04-2006, 04:40 PM
#9
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
sounds unsafe - easy to crack in an accident...
Dave
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061347308539%RhmpL33@nospam.net...
> Yes I know but some of you may have applied retro glass tanks.
>
> In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
> <NurseBustersNoSpam@msn.com> wrote:
>
> > Jeeps use steel or polyethylene fuel tanks.
> >
> > Earle
> >
> > "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> > news:040120061152437988%RhmpL33@nospam.net...
> > > although this affects mainly boats, I thought I'd cross post this here
> > > in case any of you have a fiberglass fuel tank.
> > >
> > > There are great 'problems' showing up due to the 'changeover' of
> > > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > > and leaking, harmful destructive deposits formed inside engines, etc.
> > > About half the USA states have already banned MTBE additive and are
> > > rapidly changing over to an ethanol additive, the ethanol is quite
> > > incompatible with most of the fiberglass resin used in fuel tanks.
The
> > > decomposition products of the 'melting/dissolving' resin doesnt burn
> > > and will form vast and destructive deposits in the engine (similar to
> > > putting sugar into the gasoline).
> > >
> > > for more info:
> > > http://www.moyermarine.com/forums/at...ttachmentid=42
> > > or BOATUS.com website.
> >
> >
Dave
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061347308539%RhmpL33@nospam.net...
> Yes I know but some of you may have applied retro glass tanks.
>
> In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
> <NurseBustersNoSpam@msn.com> wrote:
>
> > Jeeps use steel or polyethylene fuel tanks.
> >
> > Earle
> >
> > "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> > news:040120061152437988%RhmpL33@nospam.net...
> > > although this affects mainly boats, I thought I'd cross post this here
> > > in case any of you have a fiberglass fuel tank.
> > >
> > > There are great 'problems' showing up due to the 'changeover' of
> > > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > > and leaking, harmful destructive deposits formed inside engines, etc.
> > > About half the USA states have already banned MTBE additive and are
> > > rapidly changing over to an ethanol additive, the ethanol is quite
> > > incompatible with most of the fiberglass resin used in fuel tanks.
The
> > > decomposition products of the 'melting/dissolving' resin doesnt burn
> > > and will form vast and destructive deposits in the engine (similar to
> > > putting sugar into the gasoline).
> > >
> > > for more info:
> > > http://www.moyermarine.com/forums/at...ttachmentid=42
> > > or BOATUS.com website.
> >
> >
01-04-2006, 04:40 PM
#10
Guest
Posts: n/a
Re: MTBE to Ethanol additive change-over ..PROBLEMS
sounds unsafe - easy to crack in an accident...
Dave
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061347308539%RhmpL33@nospam.net...
> Yes I know but some of you may have applied retro glass tanks.
>
> In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
> <NurseBustersNoSpam@msn.com> wrote:
>
> > Jeeps use steel or polyethylene fuel tanks.
> >
> > Earle
> >
> > "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> > news:040120061152437988%RhmpL33@nospam.net...
> > > although this affects mainly boats, I thought I'd cross post this here
> > > in case any of you have a fiberglass fuel tank.
> > >
> > > There are great 'problems' showing up due to the 'changeover' of
> > > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > > and leaking, harmful destructive deposits formed inside engines, etc.
> > > About half the USA states have already banned MTBE additive and are
> > > rapidly changing over to an ethanol additive, the ethanol is quite
> > > incompatible with most of the fiberglass resin used in fuel tanks.
The
> > > decomposition products of the 'melting/dissolving' resin doesnt burn
> > > and will form vast and destructive deposits in the engine (similar to
> > > putting sugar into the gasoline).
> > >
> > > for more info:
> > > http://www.moyermarine.com/forums/at...ttachmentid=42
> > > or BOATUS.com website.
> >
> >
Dave
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:040120061347308539%RhmpL33@nospam.net...
> Yes I know but some of you may have applied retro glass tanks.
>
> In article <43bbfcf2$0$10250$6d36acad@roc.nntpserver.com>, Earle Horton
> <NurseBustersNoSpam@msn.com> wrote:
>
> > Jeeps use steel or polyethylene fuel tanks.
> >
> > Earle
> >
> > "Rich Hampel" <RhmpL33@nospam.net> wrote in message
> > news:040120061152437988%RhmpL33@nospam.net...
> > > although this affects mainly boats, I thought I'd cross post this here
> > > in case any of you have a fiberglass fuel tank.
> > >
> > > There are great 'problems' showing up due to the 'changeover' of
> > > gasoline addives - MTBE to Ethanol: Fiberglass fuel tanks dissolving
> > > and leaking, harmful destructive deposits formed inside engines, etc.
> > > About half the USA states have already banned MTBE additive and are
> > > rapidly changing over to an ethanol additive, the ethanol is quite
> > > incompatible with most of the fiberglass resin used in fuel tanks.
The
> > > decomposition products of the 'melting/dissolving' resin doesnt burn
> > > and will form vast and destructive deposits in the engine (similar to
> > > putting sugar into the gasoline).
> > >
> > > for more info:
> > > http://www.moyermarine.com/forums/at...ttachmentid=42
> > > or BOATUS.com website.
> >
> >