There has to be a place to let the air out..... It is usually a second
line there somewhere.

Is that the internal or external slave?

I was told that some of the newer styles have no bleeder so you are
supposed to just pump the crap out of the Master until all the bubbles
come up, but I think that is only on the newer TJ's, not sure though.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Jeep1313 wrote:
>
> The clutch on my 1991 Jeep Wrangler 4 Cyl quit working because of the slave
> cyliner having air in it there is no place to bleed it what do I do?

 

External is '94 and newer. For the '91 internal slave there is a bleeder
fitting on the outside of the bell housing. Haynes says "right
(passenger's) side of the transmission housing on four cylinder models".
The photo shows it towards the back of the clutch housing, to the side of
the transmission.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4304BCE9.F9E5C4EB@sympatico.ca...
> There has to be a place to let the air out..... It is usually a second
> line there somewhere.
>
> Is that the internal or external slave?
>
> I was told that some of the newer styles have no bleeder so you are
> supposed to just pump the crap out of the Master until all the bubbles
> come up, but I think that is only on the newer TJ's, not sure though.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeep1313 wrote:
> >
> > The clutch on my 1991 Jeep Wrangler 4 Cyl quit working because of the
slave
> > cyliner having air in it there is no place to bleed it what do I do?

 

External is '94 and newer. For the '91 internal slave there is a bleeder
fitting on the outside of the bell housing. Haynes says "right
(passenger's) side of the transmission housing on four cylinder models".
The photo shows it towards the back of the clutch housing, to the side of
the transmission.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4304BCE9.F9E5C4EB@sympatico.ca...
> There has to be a place to let the air out..... It is usually a second
> line there somewhere.
>
> Is that the internal or external slave?
>
> I was told that some of the newer styles have no bleeder so you are
> supposed to just pump the crap out of the Master until all the bubbles
> come up, but I think that is only on the newer TJ's, not sure though.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeep1313 wrote:
> >
> > The clutch on my 1991 Jeep Wrangler 4 Cyl quit working because of the
slave
> > cyliner having air in it there is no place to bleed it what do I do?

 

External is '94 and newer. For the '91 internal slave there is a bleeder
fitting on the outside of the bell housing. Haynes says "right
(passenger's) side of the transmission housing on four cylinder models".
The photo shows it towards the back of the clutch housing, to the side of
the transmission.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4304BCE9.F9E5C4EB@sympatico.ca...
> There has to be a place to let the air out..... It is usually a second
> line there somewhere.
>
> Is that the internal or external slave?
>
> I was told that some of the newer styles have no bleeder so you are
> supposed to just pump the crap out of the Master until all the bubbles
> come up, but I think that is only on the newer TJ's, not sure though.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeep1313 wrote:
> >
> > The clutch on my 1991 Jeep Wrangler 4 Cyl quit working because of the
slave
> > cyliner having air in it there is no place to bleed it what do I do?

 

External is '94 and newer. For the '91 internal slave there is a bleeder
fitting on the outside of the bell housing. Haynes says "right
(passenger's) side of the transmission housing on four cylinder models".
The photo shows it towards the back of the clutch housing, to the side of
the transmission.

Earle

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4304BCE9.F9E5C4EB@sympatico.ca...
> There has to be a place to let the air out..... It is usually a second
> line there somewhere.
>
> Is that the internal or external slave?
>
> I was told that some of the newer styles have no bleeder so you are
> supposed to just pump the crap out of the Master until all the bubbles
> come up, but I think that is only on the newer TJ's, not sure though.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeep1313 wrote:
> >
> > The clutch on my 1991 Jeep Wrangler 4 Cyl quit working because of the
slave
> > cyliner having air in it there is no place to bleed it what do I do?