LED Taillights ?
#61
Guest
Posts: n/a
Re: LED Taillights ?
Well I am scraping by with the old trailer lights on my 7 but for trailer
towing I got the "cheap" flasher (maybe $3.50) from Advance or Autozone.
That is the one that heats up two leaves inside, then cools - over and over.
Happy Jeeping
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
towing I got the "cheap" flasher (maybe $3.50) from Advance or Autozone.
That is the one that heats up two leaves inside, then cools - over and over.
Happy Jeeping
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
#62
Guest
Posts: n/a
Re: LED Taillights ?
If you are going to get diamond plating for the corners, NOW is the time to
do it.
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
do it.
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
#63
Guest
Posts: n/a
Re: LED Taillights ?
If you are going to get diamond plating for the corners, NOW is the time to
do it.
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
do it.
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
#64
Guest
Posts: n/a
Re: LED Taillights ?
If you are going to get diamond plating for the corners, NOW is the time to
do it.
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
do it.
"Dirty Ditch Dawg" <scopenutt@yahoo.com> wrote in message
news:1108515599.563347.193240@l41g2000cwc.googlegr oups.com...
> got mine in today, Gawd that back corners THIN,, (maybe some corner
> guards later on, it never ends does it,,grin)
> you could cut it witha pair of sizzors, but the jigsaw worked fine,
> and MAN there bright, got my light-boltz wired up,
> side lights and backup tommorrow,
> oh ya blinkers didnt work, just like the instructions said, as ive got
> the YJ i need to get a high rate flasher,
> tommorrow,
> johnp
>
> DAM Dirty Ditch Dawg, is startin to look like a real jeep,
>
#65
Guest
Posts: n/a
Re: LED Taillights ?
Ya i know, but my pockets are empty,,go figure,,,grin,
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
#66
Guest
Posts: n/a
Re: LED Taillights ?
Ya i know, but my pockets are empty,,go figure,,,grin,
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
#67
Guest
Posts: n/a
Re: LED Taillights ?
Ya i know, but my pockets are empty,,go figure,,,grin,
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
#68
Guest
Posts: n/a
Re: LED Taillights ?
Ya i know, but my pockets are empty,,go figure,,,grin,
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
#69
Guest
Posts: n/a
Re: LED Taillights ?
Ya i know, but my pockets are empty,,go figure,,,grin,
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
#70
Guest
Posts: n/a
Re: LED Taillights ?
Ya i know, but my pockets are empty,,go figure,,,grin,
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
90YJ -2000,00
2.5L motor 30,000 miles,
regerstering/title in this state from oregon,
inshurance--ouch,,
Highlift-jack,
tow straps
tow hooks,
power steering box,
roll bar padding,tape,
fire-extingushers, 2-cab 1 engine compartment with cable-spring
release,
1.5 shackle lift----gone now,,dumb idea, slopy driving on highway
2.5 spring-lift,-after bending my original front leafs hence the "Ditch
Dawg,"
9000-winch,--fun,
1inch body lift
rocker bars--self built,
KC lights, on self built brush bar,
CB,
Led-tail lights,
all within the last two monthes, and my wife STILL loves me,,,am i
lucky or what?
YA, im definatly addicted,
and need a 12 step program,
doing a reverse, scribe, on new corners wont be much fun, but doable,
when i get them,
im looking at the poision spyder corners, i personaly dont like diamond
plate,
but the smooth look, and my jeeps all de-cromed, all black on
white-body,
with a black gril,
if i could anodize my aluminum rims black i would,
johnp
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Morris 4x4 Center
0
04-29-2015 08:51 AM
PIAA
General Jeep and Tech Talk.
0
03-04-2013 02:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)