LED Taillights ?
#21
Guest
Posts: n/a
Re: LED Taillights ?
Joe,
Thanks for the pix. Where did you get the LED's with the chrome Ring.
I am going to use the ones with the rubber grommets, But I like those,
they are the same ones that are on the trailers I pull. I am a Truck
Driver.
What size where those lights, The Diameter I mean and what size was
the hole saw you used. Did it go through the metal pretty good?
Also what year is your TJ. I was wondering if you ran into the vapor
canister behind the passenger side light and if you had to move it?
There are a couple ways to get around the flasher problem as explained
here:
http://www.bmja.org/forum/showthread...9461#post29461
I think I am going to try the EP-27 Flasher route first.
--
Tim
[____]
(OIIIIIIO)
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I
> don't show
> in the pics is the rear backup light. I just mounted a small hella
> lamp to
> the bottom of the license plate. Other then that there bright and I
> get
> allot of comments on them. The only thing I need to figure out,
> since the
> current load is so much less, how to slow down the blinkers, I am
> guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
>
> "Nathan Otis" <na@smeat.spam.net> wrote in message
> news:36vok7F4uhhv5U1@individual.net...
>> The evap canister and other stuff is behind the rear passenger
>> wheel well.
>> Most LEDs will be shallow enough that it won't interfere. I
>> recessed my
>> stock lights cause I hadn't seen it done before (and I didn't want
>> to
> shell
>> out for new lights) and had to... adjust a few things. It's kind of
>> a
> pain.
>> I recommend against it. (the adjusting that is)
>>
>> n
>>
>> "Intergate" <roadrnnr99@REMOVE.yahoo.com> wrote in message
>> news:110kh8jd0v7fk02@corp.supernews.com...
>> > Getting ready to convert my taillights to LED on my 2004 TJ.
>> >
>> > Was wondering from anybody who has done it what you found to be
>> > the best
>> > lights. I am assuming that more LED's = brighter and better.
>> > Looking to
>> > get either some4"'s with 56 or 60 led's. I have been to some
>> > sights with
>> > tips on installing but would like to hear from any body here who
>> > has
> done
>> > it on 2004's or newer.
>> >
>> > I heard that on these years you may have to move the vapor
>> > canister on
> the
>> > passenger side that is tucked in the tub somewhere
>> >
>> > Thanks,
>> >
>> > --
>> > Tim
>> >
>> > [____]
>> > (OIIIIIIO)
>> >
>> >
>> >
>> >
>>
>>
>
>
Thanks for the pix. Where did you get the LED's with the chrome Ring.
I am going to use the ones with the rubber grommets, But I like those,
they are the same ones that are on the trailers I pull. I am a Truck
Driver.
What size where those lights, The Diameter I mean and what size was
the hole saw you used. Did it go through the metal pretty good?
Also what year is your TJ. I was wondering if you ran into the vapor
canister behind the passenger side light and if you had to move it?
There are a couple ways to get around the flasher problem as explained
here:
http://www.bmja.org/forum/showthread...9461#post29461
I think I am going to try the EP-27 Flasher route first.
--
Tim
[____]
(OIIIIIIO)
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I
> don't show
> in the pics is the rear backup light. I just mounted a small hella
> lamp to
> the bottom of the license plate. Other then that there bright and I
> get
> allot of comments on them. The only thing I need to figure out,
> since the
> current load is so much less, how to slow down the blinkers, I am
> guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
>
> "Nathan Otis" <na@smeat.spam.net> wrote in message
> news:36vok7F4uhhv5U1@individual.net...
>> The evap canister and other stuff is behind the rear passenger
>> wheel well.
>> Most LEDs will be shallow enough that it won't interfere. I
>> recessed my
>> stock lights cause I hadn't seen it done before (and I didn't want
>> to
> shell
>> out for new lights) and had to... adjust a few things. It's kind of
>> a
> pain.
>> I recommend against it. (the adjusting that is)
>>
>> n
>>
>> "Intergate" <roadrnnr99@REMOVE.yahoo.com> wrote in message
>> news:110kh8jd0v7fk02@corp.supernews.com...
>> > Getting ready to convert my taillights to LED on my 2004 TJ.
>> >
>> > Was wondering from anybody who has done it what you found to be
>> > the best
>> > lights. I am assuming that more LED's = brighter and better.
>> > Looking to
>> > get either some4"'s with 56 or 60 led's. I have been to some
>> > sights with
>> > tips on installing but would like to hear from any body here who
>> > has
> done
>> > it on 2004's or newer.
>> >
>> > I heard that on these years you may have to move the vapor
>> > canister on
> the
>> > passenger side that is tucked in the tub somewhere
>> >
>> > Thanks,
>> >
>> > --
>> > Tim
>> >
>> > [____]
>> > (OIIIIIIO)
>> >
>> >
>> >
>> >
>>
>>
>
>
#22
Guest
Posts: n/a
Re: LED Taillights ?
Joe,
Thanks for the pix. Where did you get the LED's with the chrome Ring.
I am going to use the ones with the rubber grommets, But I like those,
they are the same ones that are on the trailers I pull. I am a Truck
Driver.
What size where those lights, The Diameter I mean and what size was
the hole saw you used. Did it go through the metal pretty good?
Also what year is your TJ. I was wondering if you ran into the vapor
canister behind the passenger side light and if you had to move it?
There are a couple ways to get around the flasher problem as explained
here:
http://www.bmja.org/forum/showthread...9461#post29461
I think I am going to try the EP-27 Flasher route first.
--
Tim
[____]
(OIIIIIIO)
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I
> don't show
> in the pics is the rear backup light. I just mounted a small hella
> lamp to
> the bottom of the license plate. Other then that there bright and I
> get
> allot of comments on them. The only thing I need to figure out,
> since the
> current load is so much less, how to slow down the blinkers, I am
> guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
>
> "Nathan Otis" <na@smeat.spam.net> wrote in message
> news:36vok7F4uhhv5U1@individual.net...
>> The evap canister and other stuff is behind the rear passenger
>> wheel well.
>> Most LEDs will be shallow enough that it won't interfere. I
>> recessed my
>> stock lights cause I hadn't seen it done before (and I didn't want
>> to
> shell
>> out for new lights) and had to... adjust a few things. It's kind of
>> a
> pain.
>> I recommend against it. (the adjusting that is)
>>
>> n
>>
>> "Intergate" <roadrnnr99@REMOVE.yahoo.com> wrote in message
>> news:110kh8jd0v7fk02@corp.supernews.com...
>> > Getting ready to convert my taillights to LED on my 2004 TJ.
>> >
>> > Was wondering from anybody who has done it what you found to be
>> > the best
>> > lights. I am assuming that more LED's = brighter and better.
>> > Looking to
>> > get either some4"'s with 56 or 60 led's. I have been to some
>> > sights with
>> > tips on installing but would like to hear from any body here who
>> > has
> done
>> > it on 2004's or newer.
>> >
>> > I heard that on these years you may have to move the vapor
>> > canister on
> the
>> > passenger side that is tucked in the tub somewhere
>> >
>> > Thanks,
>> >
>> > --
>> > Tim
>> >
>> > [____]
>> > (OIIIIIIO)
>> >
>> >
>> >
>> >
>>
>>
>
>
Thanks for the pix. Where did you get the LED's with the chrome Ring.
I am going to use the ones with the rubber grommets, But I like those,
they are the same ones that are on the trailers I pull. I am a Truck
Driver.
What size where those lights, The Diameter I mean and what size was
the hole saw you used. Did it go through the metal pretty good?
Also what year is your TJ. I was wondering if you ran into the vapor
canister behind the passenger side light and if you had to move it?
There are a couple ways to get around the flasher problem as explained
here:
http://www.bmja.org/forum/showthread...9461#post29461
I think I am going to try the EP-27 Flasher route first.
--
Tim
[____]
(OIIIIIIO)
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I
> don't show
> in the pics is the rear backup light. I just mounted a small hella
> lamp to
> the bottom of the license plate. Other then that there bright and I
> get
> allot of comments on them. The only thing I need to figure out,
> since the
> current load is so much less, how to slow down the blinkers, I am
> guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
>
> "Nathan Otis" <na@smeat.spam.net> wrote in message
> news:36vok7F4uhhv5U1@individual.net...
>> The evap canister and other stuff is behind the rear passenger
>> wheel well.
>> Most LEDs will be shallow enough that it won't interfere. I
>> recessed my
>> stock lights cause I hadn't seen it done before (and I didn't want
>> to
> shell
>> out for new lights) and had to... adjust a few things. It's kind of
>> a
> pain.
>> I recommend against it. (the adjusting that is)
>>
>> n
>>
>> "Intergate" <roadrnnr99@REMOVE.yahoo.com> wrote in message
>> news:110kh8jd0v7fk02@corp.supernews.com...
>> > Getting ready to convert my taillights to LED on my 2004 TJ.
>> >
>> > Was wondering from anybody who has done it what you found to be
>> > the best
>> > lights. I am assuming that more LED's = brighter and better.
>> > Looking to
>> > get either some4"'s with 56 or 60 led's. I have been to some
>> > sights with
>> > tips on installing but would like to hear from any body here who
>> > has
> done
>> > it on 2004's or newer.
>> >
>> > I heard that on these years you may have to move the vapor
>> > canister on
> the
>> > passenger side that is tucked in the tub somewhere
>> >
>> > Thanks,
>> >
>> > --
>> > Tim
>> >
>> > [____]
>> > (OIIIIIIO)
>> >
>> >
>> >
>> >
>>
>>
>
>
#23
Guest
Posts: n/a
Re: LED Taillights ?
For your flasher here is a link that will help:
http://www.jeepsunlimited.com/forums...hreadid=229624
Here is what I did for the running lights, reverse lights and license plate:
http://7slotgrille.com/tech/led/led.htm
I have no idea about the vacuum cannister on the '04.
More LED's does not nescarily mean brighter. There are some 9 LED lights
that are just as bright as the 56. Check eBay for the lights, I heard there
was a guy on there that sells some good lights. It should be evident who he
is, he sells a bunch of them.
--James
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I don't
> show
> in the pics is the rear backup light. I just mounted a small hella lamp to
> the bottom of the license plate. Other then that there bright and I get
> allot of comments on them. The only thing I need to figure out, since the
> current load is so much less, how to slow down the blinkers, I am guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
http://www.jeepsunlimited.com/forums...hreadid=229624
Here is what I did for the running lights, reverse lights and license plate:
http://7slotgrille.com/tech/led/led.htm
I have no idea about the vacuum cannister on the '04.
More LED's does not nescarily mean brighter. There are some 9 LED lights
that are just as bright as the 56. Check eBay for the lights, I heard there
was a guy on there that sells some good lights. It should be evident who he
is, he sells a bunch of them.
--James
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I don't
> show
> in the pics is the rear backup light. I just mounted a small hella lamp to
> the bottom of the license plate. Other then that there bright and I get
> allot of comments on them. The only thing I need to figure out, since the
> current load is so much less, how to slow down the blinkers, I am guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
#24
Guest
Posts: n/a
Re: LED Taillights ?
For your flasher here is a link that will help:
http://www.jeepsunlimited.com/forums...hreadid=229624
Here is what I did for the running lights, reverse lights and license plate:
http://7slotgrille.com/tech/led/led.htm
I have no idea about the vacuum cannister on the '04.
More LED's does not nescarily mean brighter. There are some 9 LED lights
that are just as bright as the 56. Check eBay for the lights, I heard there
was a guy on there that sells some good lights. It should be evident who he
is, he sells a bunch of them.
--James
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I don't
> show
> in the pics is the rear backup light. I just mounted a small hella lamp to
> the bottom of the license plate. Other then that there bright and I get
> allot of comments on them. The only thing I need to figure out, since the
> current load is so much less, how to slow down the blinkers, I am guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
http://www.jeepsunlimited.com/forums...hreadid=229624
Here is what I did for the running lights, reverse lights and license plate:
http://7slotgrille.com/tech/led/led.htm
I have no idea about the vacuum cannister on the '04.
More LED's does not nescarily mean brighter. There are some 9 LED lights
that are just as bright as the 56. Check eBay for the lights, I heard there
was a guy on there that sells some good lights. It should be evident who he
is, he sells a bunch of them.
--James
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I don't
> show
> in the pics is the rear backup light. I just mounted a small hella lamp to
> the bottom of the license plate. Other then that there bright and I get
> allot of comments on them. The only thing I need to figure out, since the
> current load is so much less, how to slow down the blinkers, I am guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
#25
Guest
Posts: n/a
Re: LED Taillights ?
For your flasher here is a link that will help:
http://www.jeepsunlimited.com/forums...hreadid=229624
Here is what I did for the running lights, reverse lights and license plate:
http://7slotgrille.com/tech/led/led.htm
I have no idea about the vacuum cannister on the '04.
More LED's does not nescarily mean brighter. There are some 9 LED lights
that are just as bright as the 56. Check eBay for the lights, I heard there
was a guy on there that sells some good lights. It should be evident who he
is, he sells a bunch of them.
--James
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I don't
> show
> in the pics is the rear backup light. I just mounted a small hella lamp to
> the bottom of the license plate. Other then that there bright and I get
> allot of comments on them. The only thing I need to figure out, since the
> current load is so much less, how to slow down the blinkers, I am guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
http://www.jeepsunlimited.com/forums...hreadid=229624
Here is what I did for the running lights, reverse lights and license plate:
http://7slotgrille.com/tech/led/led.htm
I have no idea about the vacuum cannister on the '04.
More LED's does not nescarily mean brighter. There are some 9 LED lights
that are just as bright as the 56. Check eBay for the lights, I heard there
was a guy on there that sells some good lights. It should be evident who he
is, he sells a bunch of them.
--James
"Joe" <tjguy@coxdot.net> wrote in message
news:1YBOd.58185$0u.13537@fed1read04...
> check my install out, was pretty painless. the only thing that I don't
> show
> in the pics is the rear backup light. I just mounted a small hella lamp to
> the bottom of the license plate. Other then that there bright and I get
> allot of comments on them. The only thing I need to figure out, since the
> current load is so much less, how to slow down the blinkers, I am guess I
> need to change the flasher unit??
>
> http://members.***.net/tjguy
>
> -Joe
>
#26
Guest
Posts: n/a
Re: LED Taillights ?
Damn, That only goes up to 2000, Mine is a 2004 and I guess they
changed in 2001. I need to know the fix for 2001's up.............
anybody?
I have seen the link about cutting open the original and modifying
that but am wondering if there is a direct replacement flasher unit
for the 2001 and up models
Good Link though.
--
Tim
[____]
(OIIIIIIO)
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and
> license plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED
> lights that are just as bright as the 56. Check eBay for the lights,
> I heard there was a guy on there that sells some good lights. It
> should be evident who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I
>> don't show
>> in the pics is the rear backup light. I just mounted a small hella
>> lamp to
>> the bottom of the license plate. Other then that there bright and I
>> get
>> allot of comments on them. The only thing I need to figure out,
>> since the
>> current load is so much less, how to slow down the blinkers, I am
>> guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
changed in 2001. I need to know the fix for 2001's up.............
anybody?
I have seen the link about cutting open the original and modifying
that but am wondering if there is a direct replacement flasher unit
for the 2001 and up models
Good Link though.
--
Tim
[____]
(OIIIIIIO)
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and
> license plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED
> lights that are just as bright as the 56. Check eBay for the lights,
> I heard there was a guy on there that sells some good lights. It
> should be evident who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I
>> don't show
>> in the pics is the rear backup light. I just mounted a small hella
>> lamp to
>> the bottom of the license plate. Other then that there bright and I
>> get
>> allot of comments on them. The only thing I need to figure out,
>> since the
>> current load is so much less, how to slow down the blinkers, I am
>> guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
#27
Guest
Posts: n/a
Re: LED Taillights ?
Damn, That only goes up to 2000, Mine is a 2004 and I guess they
changed in 2001. I need to know the fix for 2001's up.............
anybody?
I have seen the link about cutting open the original and modifying
that but am wondering if there is a direct replacement flasher unit
for the 2001 and up models
Good Link though.
--
Tim
[____]
(OIIIIIIO)
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and
> license plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED
> lights that are just as bright as the 56. Check eBay for the lights,
> I heard there was a guy on there that sells some good lights. It
> should be evident who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I
>> don't show
>> in the pics is the rear backup light. I just mounted a small hella
>> lamp to
>> the bottom of the license plate. Other then that there bright and I
>> get
>> allot of comments on them. The only thing I need to figure out,
>> since the
>> current load is so much less, how to slow down the blinkers, I am
>> guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
changed in 2001. I need to know the fix for 2001's up.............
anybody?
I have seen the link about cutting open the original and modifying
that but am wondering if there is a direct replacement flasher unit
for the 2001 and up models
Good Link though.
--
Tim
[____]
(OIIIIIIO)
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and
> license plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED
> lights that are just as bright as the 56. Check eBay for the lights,
> I heard there was a guy on there that sells some good lights. It
> should be evident who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I
>> don't show
>> in the pics is the rear backup light. I just mounted a small hella
>> lamp to
>> the bottom of the license plate. Other then that there bright and I
>> get
>> allot of comments on them. The only thing I need to figure out,
>> since the
>> current load is so much less, how to slow down the blinkers, I am
>> guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
#28
Guest
Posts: n/a
Re: LED Taillights ?
Damn, That only goes up to 2000, Mine is a 2004 and I guess they
changed in 2001. I need to know the fix for 2001's up.............
anybody?
I have seen the link about cutting open the original and modifying
that but am wondering if there is a direct replacement flasher unit
for the 2001 and up models
Good Link though.
--
Tim
[____]
(OIIIIIIO)
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and
> license plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED
> lights that are just as bright as the 56. Check eBay for the lights,
> I heard there was a guy on there that sells some good lights. It
> should be evident who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I
>> don't show
>> in the pics is the rear backup light. I just mounted a small hella
>> lamp to
>> the bottom of the license plate. Other then that there bright and I
>> get
>> allot of comments on them. The only thing I need to figure out,
>> since the
>> current load is so much less, how to slow down the blinkers, I am
>> guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
changed in 2001. I need to know the fix for 2001's up.............
anybody?
I have seen the link about cutting open the original and modifying
that but am wondering if there is a direct replacement flasher unit
for the 2001 and up models
Good Link though.
--
Tim
[____]
(OIIIIIIO)
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and
> license plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED
> lights that are just as bright as the 56. Check eBay for the lights,
> I heard there was a guy on there that sells some good lights. It
> should be evident who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I
>> don't show
>> in the pics is the rear backup light. I just mounted a small hella
>> lamp to
>> the bottom of the license plate. Other then that there bright and I
>> get
>> allot of comments on them. The only thing I need to figure out,
>> since the
>> current load is so much less, how to slow down the blinkers, I am
>> guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
#29
Guest
Posts: n/a
Re: LED Taillights ?
I was going to suggest this guy too, but I can not find a link to his
name... He's on there though and his stuff is cheaper than most... I rode a
trail behind someone with his LED tail lights installed and MAN were they
bright! I'll keep looking for his name.
n.
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and license
> plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED lights
> that are just as bright as the 56. Check eBay for the lights, I heard
> there was a guy on there that sells some good lights. It should be evident
> who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I don't
>> show
>> in the pics is the rear backup light. I just mounted a small hella lamp
>> to
>> the bottom of the license plate. Other then that there bright and I get
>> allot of comments on them. The only thing I need to figure out, since the
>> current load is so much less, how to slow down the blinkers, I am guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
name... He's on there though and his stuff is cheaper than most... I rode a
trail behind someone with his LED tail lights installed and MAN were they
bright! I'll keep looking for his name.
n.
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and license
> plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED lights
> that are just as bright as the 56. Check eBay for the lights, I heard
> there was a guy on there that sells some good lights. It should be evident
> who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I don't
>> show
>> in the pics is the rear backup light. I just mounted a small hella lamp
>> to
>> the bottom of the license plate. Other then that there bright and I get
>> allot of comments on them. The only thing I need to figure out, since the
>> current load is so much less, how to slow down the blinkers, I am guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
#30
Guest
Posts: n/a
Re: LED Taillights ?
I was going to suggest this guy too, but I can not find a link to his
name... He's on there though and his stuff is cheaper than most... I rode a
trail behind someone with his LED tail lights installed and MAN were they
bright! I'll keep looking for his name.
n.
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and license
> plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED lights
> that are just as bright as the 56. Check eBay for the lights, I heard
> there was a guy on there that sells some good lights. It should be evident
> who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I don't
>> show
>> in the pics is the rear backup light. I just mounted a small hella lamp
>> to
>> the bottom of the license plate. Other then that there bright and I get
>> allot of comments on them. The only thing I need to figure out, since the
>> current load is so much less, how to slow down the blinkers, I am guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>
name... He's on there though and his stuff is cheaper than most... I rode a
trail behind someone with his LED tail lights installed and MAN were they
bright! I'll keep looking for his name.
n.
"RocknCJ" <jetowle@***.net> wrote in message
news:QvoPd.75010$0u.49227@fed1read04...
> For your flasher here is a link that will help:
> http://www.jeepsunlimited.com/forums...hreadid=229624
>
> Here is what I did for the running lights, reverse lights and license
> plate:
> http://7slotgrille.com/tech/led/led.htm
>
> I have no idea about the vacuum cannister on the '04.
>
> More LED's does not nescarily mean brighter. There are some 9 LED lights
> that are just as bright as the 56. Check eBay for the lights, I heard
> there was a guy on there that sells some good lights. It should be evident
> who he is, he sells a bunch of them.
>
> --James
>
> "Joe" <tjguy@coxdot.net> wrote in message
> news:1YBOd.58185$0u.13537@fed1read04...
>> check my install out, was pretty painless. the only thing that I don't
>> show
>> in the pics is the rear backup light. I just mounted a small hella lamp
>> to
>> the bottom of the license plate. Other then that there bright and I get
>> allot of comments on them. The only thing I need to figure out, since the
>> current load is so much less, how to slow down the blinkers, I am guess I
>> need to change the flasher unit??
>>
>> http://members.***.net/tjguy
>>
>> -Joe
>>
>