Kc Daylighters
08-17-2004, 08:22 AM
#1
Guest
Posts: n/a
Kc Daylighters
Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
Liberty(2002) and want to wire them into my high beam, has any one done
this, as KC say consult your dealer as the circuit is controlled by the
on-board computer system and may not allow this, my local Jeep Dealer is not
sure about this so I will ask the experts, waiting for your replies, many
thanks ........Frank (UK)
Liberty(2002) and want to wire them into my high beam, has any one done
this, as KC say consult your dealer as the circuit is controlled by the
on-board computer system and may not allow this, my local Jeep Dealer is not
sure about this so I will ask the experts, waiting for your replies, many
thanks ........Frank (UK)
08-17-2004, 12:00 PM
#2
Guest
Posts: n/a
Re: Kc Daylighters
Just go to either of the two headlight plugs and carefully... do a very good
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
08-17-2004, 12:00 PM
#3
Guest
Posts: n/a
Re: Kc Daylighters
Just go to either of the two headlight plugs and carefully... do a very good
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
08-17-2004, 12:00 PM
#4
Guest
Posts: n/a
Re: Kc Daylighters
Just go to either of the two headlight plugs and carefully... do a very good
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
08-17-2004, 12:00 PM
#5
Guest
Posts: n/a
Re: Kc Daylighters
Just go to either of the two headlight plugs and carefully... do a very good
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
job here... splice into the high-beam wire to control the KC relay.
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"FWoodside" <fwoodside@fwoodside.plus.com> wrote in message
news:4121f890$0$89407$ed2e19e4@ptn-nntp-reader04.plus.net...
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is
not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
>
>
08-17-2004, 12:16 PM
#6
Guest
Posts: n/a
Re: Kc Daylighters
There are two ways to do that. You need a relay for both.
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
08-17-2004, 12:16 PM
#7
Guest
Posts: n/a
Re: Kc Daylighters
There are two ways to do that. You need a relay for both.
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
08-17-2004, 12:16 PM
#8
Guest
Posts: n/a
Re: Kc Daylighters
There are two ways to do that. You need a relay for both.
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
08-17-2004, 12:16 PM
#9
Guest
Posts: n/a
Re: Kc Daylighters
There are two ways to do that. You need a relay for both.
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
One is to use the highbeam power for the relay trigger and have the
lights just come on with the highbeam switch and the other way is to
have the relay trigger power 'activated' and use a single wire to a
switch inside for the trigger ground so the driving lights have their
own switch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
08-17-2004, 02:30 PM
#10
Guest
Posts: n/a
Re: Kc Daylighters
http://www.kchilites.com/instruction...layHarness.pdf
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
FWoodside wrote:
>
> Hi Everyone, I'm installing a pair of KC Daylighters to my Jeep
> Liberty(2002) and want to wire them into my high beam, has any one done
> this, as KC say consult your dealer as the circuit is controlled by the
> on-board computer system and may not allow this, my local Jeep Dealer is not
> sure about this so I will ask the experts, waiting for your replies, many
> thanks ........Frank (UK)