Just installed locker
#51
Guest
Posts: n/a
Re: Just installed locker
Hi Eric,
Do you know of any other machine part that slides past each other
without the use of a thrust washer? Two hard metals must have a soft
metal separating them or they will gall.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
Do you know of any other machine part that slides past each other
without the use of a thrust washer? Two hard metals must have a soft
metal separating them or they will gall.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
#52
Guest
Posts: n/a
Re: Just installed locker
Hi Eric,
Do you know of any other machine part that slides past each other
without the use of a thrust washer? Two hard metals must have a soft
metal separating them or they will gall.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
Do you know of any other machine part that slides past each other
without the use of a thrust washer? Two hard metals must have a soft
metal separating them or they will gall.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
#53
Guest
Posts: n/a
Re: Just installed locker
Hi Eric,
Do you know of any other machine part that slides past each other
without the use of a thrust washer? Two hard metals must have a soft
metal separating them or they will gall.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
Do you know of any other machine part that slides past each other
without the use of a thrust washer? Two hard metals must have a soft
metal separating them or they will gall.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
#54
Guest
Posts: n/a
Re: Just installed locker
Eric wrote:
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
#55
Guest
Posts: n/a
Re: Just installed locker
Eric wrote:
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
#56
Guest
Posts: n/a
Re: Just installed locker
Eric wrote:
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
#57
Guest
Posts: n/a
Re: Just installed locker
Eric wrote:
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
> You go to 10 websites and half will say one thing, the other half
> something else. Who is right??
I am.
Steve
http://xjeep.dyndns.org
> Eric
> "Steve" <steve@xjeep.dyndns.org> wrote in message
> news:bLqge.11395$Ph4.375123@ursa-nb00s0.nbnet.nb.ca...
>
>>Don't be so sure about the 'all Dana 35 after 94' generalization. For
>>instance this catalog implies that TJ still had the ABS/nonABS carrier
>>difference and that non ABS TJs require the 2310S2:
>>
>> http://www.drivetrain.com/Lkrightjeepapp.html
>>
>>Also note the disclaimer on the Powertrax site:
>>
>>"Powertrax has attempted to make this Application Guide as accurate as
>>possible. However, Powertrax cannot guarantee correctness. Identical model
>>vehicles may have different axles or differentials than stated in this
>>guide depending on original options ordered and other factors. It is
>>advisable to check the vehicle to determine precisely which differential
>>and axle are present."
>>
>>I believe you have a non-ABS carrier.
>>
>>Steve
>>http://xjeep.dyndns.org
#58
Guest
Posts: n/a
Re: Just installed locker
If you cannot install the thrust washers it needs, then it doesn't
fit....
Someone else, Steve I think pointed out what you will destroy driving it
like that didn't he?
It sure doesn't take long to have a rear end blow out by the way......
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:4282C1A1.EC97C809@***.net...
> > First clue, yours does not fit.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> >>
> >> I read that -- so how do I know if I have the right part? You go to 10
> >> websites and half will say one thing, the other half something else. Who
> >> is
> >> right??
> >>
> >> Eric
fit....
Someone else, Steve I think pointed out what you will destroy driving it
like that didn't he?
It sure doesn't take long to have a rear end blow out by the way......
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:4282C1A1.EC97C809@***.net...
> > First clue, yours does not fit.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> >>
> >> I read that -- so how do I know if I have the right part? You go to 10
> >> websites and half will say one thing, the other half something else. Who
> >> is
> >> right??
> >>
> >> Eric
#59
Guest
Posts: n/a
Re: Just installed locker
If you cannot install the thrust washers it needs, then it doesn't
fit....
Someone else, Steve I think pointed out what you will destroy driving it
like that didn't he?
It sure doesn't take long to have a rear end blow out by the way......
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:4282C1A1.EC97C809@***.net...
> > First clue, yours does not fit.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> >>
> >> I read that -- so how do I know if I have the right part? You go to 10
> >> websites and half will say one thing, the other half something else. Who
> >> is
> >> right??
> >>
> >> Eric
fit....
Someone else, Steve I think pointed out what you will destroy driving it
like that didn't he?
It sure doesn't take long to have a rear end blow out by the way......
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:4282C1A1.EC97C809@***.net...
> > First clue, yours does not fit.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> >>
> >> I read that -- so how do I know if I have the right part? You go to 10
> >> websites and half will say one thing, the other half something else. Who
> >> is
> >> right??
> >>
> >> Eric
#60
Guest
Posts: n/a
Re: Just installed locker
If you cannot install the thrust washers it needs, then it doesn't
fit....
Someone else, Steve I think pointed out what you will destroy driving it
like that didn't he?
It sure doesn't take long to have a rear end blow out by the way......
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:4282C1A1.EC97C809@***.net...
> > First clue, yours does not fit.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> >>
> >> I read that -- so how do I know if I have the right part? You go to 10
> >> websites and half will say one thing, the other half something else. Who
> >> is
> >> right??
> >>
> >> Eric
fit....
Someone else, Steve I think pointed out what you will destroy driving it
like that didn't he?
It sure doesn't take long to have a rear end blow out by the way......
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Sure it does. Just not with the thrust washers. Found out he bought it
> from a guy with a TJ that used it for a short time... have to find out if
> that TJ had ABS or not.
>
> It just doesn't make sense... I've seen more separate listings for the
> no-slip (ABS or not) although I can't imagine what the difference would be
> between the no-slip and lockright.. (just seems to be the guts are
> different).
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:4282C1A1.EC97C809@***.net...
> > First clue, yours does not fit.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> >>
> >> I read that -- so how do I know if I have the right part? You go to 10
> >> websites and half will say one thing, the other half something else. Who
> >> is
> >> right??
> >>
> >> Eric