Jeep Cherokee Dana 44 or 35?
#11
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
Coo didn't know that Cherokees had D44s at one point.
Dave Milne, Scotland
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
Dave Milne, Scotland
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
#12
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
Coo didn't know that Cherokees had D44s at one point.
Dave Milne, Scotland
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
Dave Milne, Scotland
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
#13
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
Coo didn't know that Cherokees had D44s at one point.
Dave Milne, Scotland
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
Dave Milne, Scotland
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
#14
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
It was back in the Real Jeep days. ;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Coo didn't know that Cherokees had D44s at one point.
>
> Dave Milne, Scotland
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Coo didn't know that Cherokees had D44s at one point.
>
> Dave Milne, Scotland
#15
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
It was back in the Real Jeep days. ;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Coo didn't know that Cherokees had D44s at one point.
>
> Dave Milne, Scotland
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Coo didn't know that Cherokees had D44s at one point.
>
> Dave Milne, Scotland
#16
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
It was back in the Real Jeep days. ;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Coo didn't know that Cherokees had D44s at one point.
>
> Dave Milne, Scotland
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dave Milne wrote:
>
> Coo didn't know that Cherokees had D44s at one point.
>
> Dave Milne, Scotland
#17
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
He didn't say anything about a Wagoner (AMC 20).
http://www.jjournal.net/jeep/reference/Axles/
JimG
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
http://www.jjournal.net/jeep/reference/Axles/
JimG
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
#18
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
He didn't say anything about a Wagoner (AMC 20).
http://www.jjournal.net/jeep/reference/Axles/
JimG
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
http://www.jjournal.net/jeep/reference/Axles/
JimG
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
#19
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
He didn't say anything about a Wagoner (AMC 20).
http://www.jjournal.net/jeep/reference/Axles/
JimG
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
http://www.jjournal.net/jeep/reference/Axles/
JimG
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:4001D52A.30772F6D@***.net...
> Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
> Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
> their covers at: http://www.coloradok5.com/axleguide.shtml
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis wrote:
> >
> > Hello,
> > I am asking this for a friend of mine. he recently purchased an 86
> > Cherokee
> > with the Command-Trac system, and needs to be able to tell which rear
axle
> > is
> > on it.
> > He was told at autozone that it was either a Dana 44 or a Dana 35 (he
said
> > that Autozone said it was either a 44 or a 38... But, i dont think
they
> > made a 38..
> > So, i am assuming they said 35 and he misheard..)
> >
> > Anyone have any ideas/suggestions?
> >
> > Thanks in advance,
> > Dennis
#20
Guest
Posts: n/a
Re: Jeep Cherokee Dana 44 or 35?
In article <4001D52A.30772F6D@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
>Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
>their covers at: http://www.coloradok5.com/axleguide.shtml
I don't recall an XJ Cherokee ever having an AMC 20. More than likely it was a
35.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
III <----------@***.net> writes:
>Hi Dennis,
> It's a AMC 20 if the axle hub has a nut on the end of the axle. A
>Dana 44 if the Cherokee was assemble in the last days of AMC. Compare
>their covers at: http://www.coloradok5.com/axleguide.shtml
I don't recall an XJ Cherokee ever having an AMC 20. More than likely it was a
35.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html