Hi-Lift Jack Thread
#41
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
The last 2 I saw do bad things were new. One went insane when up and
not attended, (guy had to let go to hook up a chain) that one almost
removed the side of my face and the other one just dropped 18" almost
taking the gent's foot and finger off.
A buddy's dad worked for the railroad and he showed/taught us about
those things back in the 60's. He was good and showed us all the ways
they can screw up before letting us near one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Let me say, though, of all the stories of when someone was using the hilift
> as it was intended, but was maimed/killed/almost xxx, it seems there were
> extra circumstances. 1) The most common is: I was distracted.. or I took my
> hand off the handle for just a minute... or I turned to do this... seems to
> me if they had been focused on the task at hand and handling the jack, that
> wouldn't have happened. 2) The condition of the jack was never clear. Was
> it mounted on the outside of the vehicle and exposed to the elements all the
> time? Was it really old? and 3) How experienced was the user?
>
> You can bet I won't take my eyes/hands/focus off the jack for a second while
> I'm using it. If I am in a situation that I had to, then I'll wait for
> someone else to handle what would require my attention. I also will only
> mount my jack inside the cab (behind the rollbars). That will keep the
> elements off it. If I'm going to have the top down, I'll put it in a bag.
> Also, I can guarantee I won't use this without learning how to use it
> properly first. I'll definitely get some experienced people to give me a
> hand if/when I use it the first couple of times.
>
> Ok, I'm off my soapbox now... ;-)
>
> HAPPY HO-HO TO EVERYONE!!!
>
> Eric
> 99 TJ SE
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:5_GdnXNBObTlOFHcRVn-tg@comcast.com...
> >
> > "Eric" <gymrat@baileyscorner.com> wrote in message
> > news:uv%yd.4677$3v5.3617@fe2.texas.rr.com...
> >> Like everyone else said, the hilift shouldn't be used to change tires.
> >> That isn't its intedend use. I have 33's and a 4" lift and I'm fairly
> >> certain my stock bottle jack will still assist me in changing a tire.
> >>
> >> Eric
> >> 99 TJ SE
> >
> > Thanx for the input, guess I'll dig around the garage. I'm sure I have an
> > old
> > scissor & a couple good size bottle jacks out there.
> >
> > L8r - George
> >
> >
not attended, (guy had to let go to hook up a chain) that one almost
removed the side of my face and the other one just dropped 18" almost
taking the gent's foot and finger off.
A buddy's dad worked for the railroad and he showed/taught us about
those things back in the 60's. He was good and showed us all the ways
they can screw up before letting us near one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Let me say, though, of all the stories of when someone was using the hilift
> as it was intended, but was maimed/killed/almost xxx, it seems there were
> extra circumstances. 1) The most common is: I was distracted.. or I took my
> hand off the handle for just a minute... or I turned to do this... seems to
> me if they had been focused on the task at hand and handling the jack, that
> wouldn't have happened. 2) The condition of the jack was never clear. Was
> it mounted on the outside of the vehicle and exposed to the elements all the
> time? Was it really old? and 3) How experienced was the user?
>
> You can bet I won't take my eyes/hands/focus off the jack for a second while
> I'm using it. If I am in a situation that I had to, then I'll wait for
> someone else to handle what would require my attention. I also will only
> mount my jack inside the cab (behind the rollbars). That will keep the
> elements off it. If I'm going to have the top down, I'll put it in a bag.
> Also, I can guarantee I won't use this without learning how to use it
> properly first. I'll definitely get some experienced people to give me a
> hand if/when I use it the first couple of times.
>
> Ok, I'm off my soapbox now... ;-)
>
> HAPPY HO-HO TO EVERYONE!!!
>
> Eric
> 99 TJ SE
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:5_GdnXNBObTlOFHcRVn-tg@comcast.com...
> >
> > "Eric" <gymrat@baileyscorner.com> wrote in message
> > news:uv%yd.4677$3v5.3617@fe2.texas.rr.com...
> >> Like everyone else said, the hilift shouldn't be used to change tires.
> >> That isn't its intedend use. I have 33's and a 4" lift and I'm fairly
> >> certain my stock bottle jack will still assist me in changing a tire.
> >>
> >> Eric
> >> 99 TJ SE
> >
> > Thanx for the input, guess I'll dig around the garage. I'm sure I have an
> > old
> > scissor & a couple good size bottle jacks out there.
> >
> > L8r - George
> >
> >
#42
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
The last 2 I saw do bad things were new. One went insane when up and
not attended, (guy had to let go to hook up a chain) that one almost
removed the side of my face and the other one just dropped 18" almost
taking the gent's foot and finger off.
A buddy's dad worked for the railroad and he showed/taught us about
those things back in the 60's. He was good and showed us all the ways
they can screw up before letting us near one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Let me say, though, of all the stories of when someone was using the hilift
> as it was intended, but was maimed/killed/almost xxx, it seems there were
> extra circumstances. 1) The most common is: I was distracted.. or I took my
> hand off the handle for just a minute... or I turned to do this... seems to
> me if they had been focused on the task at hand and handling the jack, that
> wouldn't have happened. 2) The condition of the jack was never clear. Was
> it mounted on the outside of the vehicle and exposed to the elements all the
> time? Was it really old? and 3) How experienced was the user?
>
> You can bet I won't take my eyes/hands/focus off the jack for a second while
> I'm using it. If I am in a situation that I had to, then I'll wait for
> someone else to handle what would require my attention. I also will only
> mount my jack inside the cab (behind the rollbars). That will keep the
> elements off it. If I'm going to have the top down, I'll put it in a bag.
> Also, I can guarantee I won't use this without learning how to use it
> properly first. I'll definitely get some experienced people to give me a
> hand if/when I use it the first couple of times.
>
> Ok, I'm off my soapbox now... ;-)
>
> HAPPY HO-HO TO EVERYONE!!!
>
> Eric
> 99 TJ SE
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:5_GdnXNBObTlOFHcRVn-tg@comcast.com...
> >
> > "Eric" <gymrat@baileyscorner.com> wrote in message
> > news:uv%yd.4677$3v5.3617@fe2.texas.rr.com...
> >> Like everyone else said, the hilift shouldn't be used to change tires.
> >> That isn't its intedend use. I have 33's and a 4" lift and I'm fairly
> >> certain my stock bottle jack will still assist me in changing a tire.
> >>
> >> Eric
> >> 99 TJ SE
> >
> > Thanx for the input, guess I'll dig around the garage. I'm sure I have an
> > old
> > scissor & a couple good size bottle jacks out there.
> >
> > L8r - George
> >
> >
not attended, (guy had to let go to hook up a chain) that one almost
removed the side of my face and the other one just dropped 18" almost
taking the gent's foot and finger off.
A buddy's dad worked for the railroad and he showed/taught us about
those things back in the 60's. He was good and showed us all the ways
they can screw up before letting us near one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Let me say, though, of all the stories of when someone was using the hilift
> as it was intended, but was maimed/killed/almost xxx, it seems there were
> extra circumstances. 1) The most common is: I was distracted.. or I took my
> hand off the handle for just a minute... or I turned to do this... seems to
> me if they had been focused on the task at hand and handling the jack, that
> wouldn't have happened. 2) The condition of the jack was never clear. Was
> it mounted on the outside of the vehicle and exposed to the elements all the
> time? Was it really old? and 3) How experienced was the user?
>
> You can bet I won't take my eyes/hands/focus off the jack for a second while
> I'm using it. If I am in a situation that I had to, then I'll wait for
> someone else to handle what would require my attention. I also will only
> mount my jack inside the cab (behind the rollbars). That will keep the
> elements off it. If I'm going to have the top down, I'll put it in a bag.
> Also, I can guarantee I won't use this without learning how to use it
> properly first. I'll definitely get some experienced people to give me a
> hand if/when I use it the first couple of times.
>
> Ok, I'm off my soapbox now... ;-)
>
> HAPPY HO-HO TO EVERYONE!!!
>
> Eric
> 99 TJ SE
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:5_GdnXNBObTlOFHcRVn-tg@comcast.com...
> >
> > "Eric" <gymrat@baileyscorner.com> wrote in message
> > news:uv%yd.4677$3v5.3617@fe2.texas.rr.com...
> >> Like everyone else said, the hilift shouldn't be used to change tires.
> >> That isn't its intedend use. I have 33's and a 4" lift and I'm fairly
> >> certain my stock bottle jack will still assist me in changing a tire.
> >>
> >> Eric
> >> 99 TJ SE
> >
> > Thanx for the input, guess I'll dig around the garage. I'm sure I have an
> > old
> > scissor & a couple good size bottle jacks out there.
> >
> > L8r - George
> >
> >
#43
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
The last 2 I saw do bad things were new. One went insane when up and
not attended, (guy had to let go to hook up a chain) that one almost
removed the side of my face and the other one just dropped 18" almost
taking the gent's foot and finger off.
A buddy's dad worked for the railroad and he showed/taught us about
those things back in the 60's. He was good and showed us all the ways
they can screw up before letting us near one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Let me say, though, of all the stories of when someone was using the hilift
> as it was intended, but was maimed/killed/almost xxx, it seems there were
> extra circumstances. 1) The most common is: I was distracted.. or I took my
> hand off the handle for just a minute... or I turned to do this... seems to
> me if they had been focused on the task at hand and handling the jack, that
> wouldn't have happened. 2) The condition of the jack was never clear. Was
> it mounted on the outside of the vehicle and exposed to the elements all the
> time? Was it really old? and 3) How experienced was the user?
>
> You can bet I won't take my eyes/hands/focus off the jack for a second while
> I'm using it. If I am in a situation that I had to, then I'll wait for
> someone else to handle what would require my attention. I also will only
> mount my jack inside the cab (behind the rollbars). That will keep the
> elements off it. If I'm going to have the top down, I'll put it in a bag.
> Also, I can guarantee I won't use this without learning how to use it
> properly first. I'll definitely get some experienced people to give me a
> hand if/when I use it the first couple of times.
>
> Ok, I'm off my soapbox now... ;-)
>
> HAPPY HO-HO TO EVERYONE!!!
>
> Eric
> 99 TJ SE
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:5_GdnXNBObTlOFHcRVn-tg@comcast.com...
> >
> > "Eric" <gymrat@baileyscorner.com> wrote in message
> > news:uv%yd.4677$3v5.3617@fe2.texas.rr.com...
> >> Like everyone else said, the hilift shouldn't be used to change tires.
> >> That isn't its intedend use. I have 33's and a 4" lift and I'm fairly
> >> certain my stock bottle jack will still assist me in changing a tire.
> >>
> >> Eric
> >> 99 TJ SE
> >
> > Thanx for the input, guess I'll dig around the garage. I'm sure I have an
> > old
> > scissor & a couple good size bottle jacks out there.
> >
> > L8r - George
> >
> >
not attended, (guy had to let go to hook up a chain) that one almost
removed the side of my face and the other one just dropped 18" almost
taking the gent's foot and finger off.
A buddy's dad worked for the railroad and he showed/taught us about
those things back in the 60's. He was good and showed us all the ways
they can screw up before letting us near one.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Let me say, though, of all the stories of when someone was using the hilift
> as it was intended, but was maimed/killed/almost xxx, it seems there were
> extra circumstances. 1) The most common is: I was distracted.. or I took my
> hand off the handle for just a minute... or I turned to do this... seems to
> me if they had been focused on the task at hand and handling the jack, that
> wouldn't have happened. 2) The condition of the jack was never clear. Was
> it mounted on the outside of the vehicle and exposed to the elements all the
> time? Was it really old? and 3) How experienced was the user?
>
> You can bet I won't take my eyes/hands/focus off the jack for a second while
> I'm using it. If I am in a situation that I had to, then I'll wait for
> someone else to handle what would require my attention. I also will only
> mount my jack inside the cab (behind the rollbars). That will keep the
> elements off it. If I'm going to have the top down, I'll put it in a bag.
> Also, I can guarantee I won't use this without learning how to use it
> properly first. I'll definitely get some experienced people to give me a
> hand if/when I use it the first couple of times.
>
> Ok, I'm off my soapbox now... ;-)
>
> HAPPY HO-HO TO EVERYONE!!!
>
> Eric
> 99 TJ SE
> "Jersey" <IamHellbound@nospam.comcast.net> wrote in message
> news:5_GdnXNBObTlOFHcRVn-tg@comcast.com...
> >
> > "Eric" <gymrat@baileyscorner.com> wrote in message
> > news:uv%yd.4677$3v5.3617@fe2.texas.rr.com...
> >> Like everyone else said, the hilift shouldn't be used to change tires.
> >> That isn't its intedend use. I have 33's and a 4" lift and I'm fairly
> >> certain my stock bottle jack will still assist me in changing a tire.
> >>
> >> Eric
> >> 99 TJ SE
> >
> > Thanx for the input, guess I'll dig around the garage. I'm sure I have an
> > old
> > scissor & a couple good size bottle jacks out there.
> >
> > L8r - George
> >
> >
#44
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
That POS bottle jack is the best tool for changing a flat tire. A HiLift is
poorly suited for that operation.
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:j8idnT4BgpuHYFbcRVn-gA@comcast.com...
> OK Fellas I'm kinda new to this Jeep stuff, I've had my TJ (X)
> just over a year & it's running stock wheels & tires Goodyear,
> Wranglers GS-A's. The only thing I've done to it so far is install
> a Wilderness rack from Garvin. I've been wanting to replace the
> stock bumpers with something a little more substantial but
> I have that old Italian disease (Myfunds-r-low) Anyway on the
> way home from work yesterday I ran over some junk in the road,
> (turned out to be a busted up headboard that musta fell offa
> someone's truck) And somehow it blew a 2 inch hole in the
> sidewall of my rear tire. Luckily I was only doing about 35 mph
> cause it went flat right now. The weirdest thing was as soon
> as I pulled to the side of the road 2 guys form nowhere were
> at my door & were in the process of helping me change to tire
> & it's good luck because it wasn't till then that I even thought
> about the POS bottle jack that comes with the Jeep. One of the
> good Samaritans had a rollaround hydro jack in his car that I used.
> It really got me thinking I need to get a real jack for this thing.
> Now don't slap me in the back of the head but will the stock
> bumpers hold up to the Hi-Lift jack? They seem kinda cheesy.
> I've got the rack to bolt it to. Now it looks like I'm going to spend
> a good part of my Xmas Eve looking for a good price on a new tire.
>
> TIA - George
>
poorly suited for that operation.
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:j8idnT4BgpuHYFbcRVn-gA@comcast.com...
> OK Fellas I'm kinda new to this Jeep stuff, I've had my TJ (X)
> just over a year & it's running stock wheels & tires Goodyear,
> Wranglers GS-A's. The only thing I've done to it so far is install
> a Wilderness rack from Garvin. I've been wanting to replace the
> stock bumpers with something a little more substantial but
> I have that old Italian disease (Myfunds-r-low) Anyway on the
> way home from work yesterday I ran over some junk in the road,
> (turned out to be a busted up headboard that musta fell offa
> someone's truck) And somehow it blew a 2 inch hole in the
> sidewall of my rear tire. Luckily I was only doing about 35 mph
> cause it went flat right now. The weirdest thing was as soon
> as I pulled to the side of the road 2 guys form nowhere were
> at my door & were in the process of helping me change to tire
> & it's good luck because it wasn't till then that I even thought
> about the POS bottle jack that comes with the Jeep. One of the
> good Samaritans had a rollaround hydro jack in his car that I used.
> It really got me thinking I need to get a real jack for this thing.
> Now don't slap me in the back of the head but will the stock
> bumpers hold up to the Hi-Lift jack? They seem kinda cheesy.
> I've got the rack to bolt it to. Now it looks like I'm going to spend
> a good part of my Xmas Eve looking for a good price on a new tire.
>
> TIA - George
>
#45
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
That POS bottle jack is the best tool for changing a flat tire. A HiLift is
poorly suited for that operation.
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:j8idnT4BgpuHYFbcRVn-gA@comcast.com...
> OK Fellas I'm kinda new to this Jeep stuff, I've had my TJ (X)
> just over a year & it's running stock wheels & tires Goodyear,
> Wranglers GS-A's. The only thing I've done to it so far is install
> a Wilderness rack from Garvin. I've been wanting to replace the
> stock bumpers with something a little more substantial but
> I have that old Italian disease (Myfunds-r-low) Anyway on the
> way home from work yesterday I ran over some junk in the road,
> (turned out to be a busted up headboard that musta fell offa
> someone's truck) And somehow it blew a 2 inch hole in the
> sidewall of my rear tire. Luckily I was only doing about 35 mph
> cause it went flat right now. The weirdest thing was as soon
> as I pulled to the side of the road 2 guys form nowhere were
> at my door & were in the process of helping me change to tire
> & it's good luck because it wasn't till then that I even thought
> about the POS bottle jack that comes with the Jeep. One of the
> good Samaritans had a rollaround hydro jack in his car that I used.
> It really got me thinking I need to get a real jack for this thing.
> Now don't slap me in the back of the head but will the stock
> bumpers hold up to the Hi-Lift jack? They seem kinda cheesy.
> I've got the rack to bolt it to. Now it looks like I'm going to spend
> a good part of my Xmas Eve looking for a good price on a new tire.
>
> TIA - George
>
poorly suited for that operation.
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:j8idnT4BgpuHYFbcRVn-gA@comcast.com...
> OK Fellas I'm kinda new to this Jeep stuff, I've had my TJ (X)
> just over a year & it's running stock wheels & tires Goodyear,
> Wranglers GS-A's. The only thing I've done to it so far is install
> a Wilderness rack from Garvin. I've been wanting to replace the
> stock bumpers with something a little more substantial but
> I have that old Italian disease (Myfunds-r-low) Anyway on the
> way home from work yesterday I ran over some junk in the road,
> (turned out to be a busted up headboard that musta fell offa
> someone's truck) And somehow it blew a 2 inch hole in the
> sidewall of my rear tire. Luckily I was only doing about 35 mph
> cause it went flat right now. The weirdest thing was as soon
> as I pulled to the side of the road 2 guys form nowhere were
> at my door & were in the process of helping me change to tire
> & it's good luck because it wasn't till then that I even thought
> about the POS bottle jack that comes with the Jeep. One of the
> good Samaritans had a rollaround hydro jack in his car that I used.
> It really got me thinking I need to get a real jack for this thing.
> Now don't slap me in the back of the head but will the stock
> bumpers hold up to the Hi-Lift jack? They seem kinda cheesy.
> I've got the rack to bolt it to. Now it looks like I'm going to spend
> a good part of my Xmas Eve looking for a good price on a new tire.
>
> TIA - George
>
#46
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
That POS bottle jack is the best tool for changing a flat tire. A HiLift is
poorly suited for that operation.
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:j8idnT4BgpuHYFbcRVn-gA@comcast.com...
> OK Fellas I'm kinda new to this Jeep stuff, I've had my TJ (X)
> just over a year & it's running stock wheels & tires Goodyear,
> Wranglers GS-A's. The only thing I've done to it so far is install
> a Wilderness rack from Garvin. I've been wanting to replace the
> stock bumpers with something a little more substantial but
> I have that old Italian disease (Myfunds-r-low) Anyway on the
> way home from work yesterday I ran over some junk in the road,
> (turned out to be a busted up headboard that musta fell offa
> someone's truck) And somehow it blew a 2 inch hole in the
> sidewall of my rear tire. Luckily I was only doing about 35 mph
> cause it went flat right now. The weirdest thing was as soon
> as I pulled to the side of the road 2 guys form nowhere were
> at my door & were in the process of helping me change to tire
> & it's good luck because it wasn't till then that I even thought
> about the POS bottle jack that comes with the Jeep. One of the
> good Samaritans had a rollaround hydro jack in his car that I used.
> It really got me thinking I need to get a real jack for this thing.
> Now don't slap me in the back of the head but will the stock
> bumpers hold up to the Hi-Lift jack? They seem kinda cheesy.
> I've got the rack to bolt it to. Now it looks like I'm going to spend
> a good part of my Xmas Eve looking for a good price on a new tire.
>
> TIA - George
>
poorly suited for that operation.
"Jersey" <IamHellbound@nospam.comcast.net> wrote in message
news:j8idnT4BgpuHYFbcRVn-gA@comcast.com...
> OK Fellas I'm kinda new to this Jeep stuff, I've had my TJ (X)
> just over a year & it's running stock wheels & tires Goodyear,
> Wranglers GS-A's. The only thing I've done to it so far is install
> a Wilderness rack from Garvin. I've been wanting to replace the
> stock bumpers with something a little more substantial but
> I have that old Italian disease (Myfunds-r-low) Anyway on the
> way home from work yesterday I ran over some junk in the road,
> (turned out to be a busted up headboard that musta fell offa
> someone's truck) And somehow it blew a 2 inch hole in the
> sidewall of my rear tire. Luckily I was only doing about 35 mph
> cause it went flat right now. The weirdest thing was as soon
> as I pulled to the side of the road 2 guys form nowhere were
> at my door & were in the process of helping me change to tire
> & it's good luck because it wasn't till then that I even thought
> about the POS bottle jack that comes with the Jeep. One of the
> good Samaritans had a rollaround hydro jack in his car that I used.
> It really got me thinking I need to get a real jack for this thing.
> Now don't slap me in the back of the head but will the stock
> bumpers hold up to the Hi-Lift jack? They seem kinda cheesy.
> I've got the rack to bolt it to. Now it looks like I'm going to spend
> a good part of my Xmas Eve looking for a good price on a new tire.
>
> TIA - George
>
#47
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
Hi George,
In the fifties we had to use the dangerous bumper jack to jack the
car up high enough for the tire to clear the fender skirts:
http://www.nls.net/mp/mikemonett/Nash52/Nash52.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jersey wrote:
>
> Ya know come to think, I'm old enough to remember when that was the (standard)
> type of jack that came with all cars & trucks & they did the job but I also remember
> wondering if the thing was going to go flying or slip out from under the car. Also it's
> real easy to get caught up in the moment while changing a flat (or getting yourself
> outa a swamp-hole which may just be the case down here in Florida) but you do get
> caught up & find your self doing things that you wouldn't normally do. To get my Jeep's
> blowout changed the other day we did a couple things that weren't very safe & I remember
> that I even commented that "I was sure OSHA wouldn't approve of this." But when
> your on the side of the road & traffic is flying by & your half on the road, half off or close
> to a ditch, sand all over & pieces of tires, nut, bolts, broken bottles, beer cans & other
> assorted roadside trash you're not thinking safety so much as you might be thinking
> what's the quickest way to get this tire changed & get the hell outa here. I guess
> there's always AAA..........................
>
> Happy Holidays Ya'll - George
In the fifties we had to use the dangerous bumper jack to jack the
car up high enough for the tire to clear the fender skirts:
http://www.nls.net/mp/mikemonett/Nash52/Nash52.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jersey wrote:
>
> Ya know come to think, I'm old enough to remember when that was the (standard)
> type of jack that came with all cars & trucks & they did the job but I also remember
> wondering if the thing was going to go flying or slip out from under the car. Also it's
> real easy to get caught up in the moment while changing a flat (or getting yourself
> outa a swamp-hole which may just be the case down here in Florida) but you do get
> caught up & find your self doing things that you wouldn't normally do. To get my Jeep's
> blowout changed the other day we did a couple things that weren't very safe & I remember
> that I even commented that "I was sure OSHA wouldn't approve of this." But when
> your on the side of the road & traffic is flying by & your half on the road, half off or close
> to a ditch, sand all over & pieces of tires, nut, bolts, broken bottles, beer cans & other
> assorted roadside trash you're not thinking safety so much as you might be thinking
> what's the quickest way to get this tire changed & get the hell outa here. I guess
> there's always AAA..........................
>
> Happy Holidays Ya'll - George
#48
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
Hi George,
In the fifties we had to use the dangerous bumper jack to jack the
car up high enough for the tire to clear the fender skirts:
http://www.nls.net/mp/mikemonett/Nash52/Nash52.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jersey wrote:
>
> Ya know come to think, I'm old enough to remember when that was the (standard)
> type of jack that came with all cars & trucks & they did the job but I also remember
> wondering if the thing was going to go flying or slip out from under the car. Also it's
> real easy to get caught up in the moment while changing a flat (or getting yourself
> outa a swamp-hole which may just be the case down here in Florida) but you do get
> caught up & find your self doing things that you wouldn't normally do. To get my Jeep's
> blowout changed the other day we did a couple things that weren't very safe & I remember
> that I even commented that "I was sure OSHA wouldn't approve of this." But when
> your on the side of the road & traffic is flying by & your half on the road, half off or close
> to a ditch, sand all over & pieces of tires, nut, bolts, broken bottles, beer cans & other
> assorted roadside trash you're not thinking safety so much as you might be thinking
> what's the quickest way to get this tire changed & get the hell outa here. I guess
> there's always AAA..........................
>
> Happy Holidays Ya'll - George
In the fifties we had to use the dangerous bumper jack to jack the
car up high enough for the tire to clear the fender skirts:
http://www.nls.net/mp/mikemonett/Nash52/Nash52.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jersey wrote:
>
> Ya know come to think, I'm old enough to remember when that was the (standard)
> type of jack that came with all cars & trucks & they did the job but I also remember
> wondering if the thing was going to go flying or slip out from under the car. Also it's
> real easy to get caught up in the moment while changing a flat (or getting yourself
> outa a swamp-hole which may just be the case down here in Florida) but you do get
> caught up & find your self doing things that you wouldn't normally do. To get my Jeep's
> blowout changed the other day we did a couple things that weren't very safe & I remember
> that I even commented that "I was sure OSHA wouldn't approve of this." But when
> your on the side of the road & traffic is flying by & your half on the road, half off or close
> to a ditch, sand all over & pieces of tires, nut, bolts, broken bottles, beer cans & other
> assorted roadside trash you're not thinking safety so much as you might be thinking
> what's the quickest way to get this tire changed & get the hell outa here. I guess
> there's always AAA..........................
>
> Happy Holidays Ya'll - George
#49
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
Hi George,
In the fifties we had to use the dangerous bumper jack to jack the
car up high enough for the tire to clear the fender skirts:
http://www.nls.net/mp/mikemonett/Nash52/Nash52.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jersey wrote:
>
> Ya know come to think, I'm old enough to remember when that was the (standard)
> type of jack that came with all cars & trucks & they did the job but I also remember
> wondering if the thing was going to go flying or slip out from under the car. Also it's
> real easy to get caught up in the moment while changing a flat (or getting yourself
> outa a swamp-hole which may just be the case down here in Florida) but you do get
> caught up & find your self doing things that you wouldn't normally do. To get my Jeep's
> blowout changed the other day we did a couple things that weren't very safe & I remember
> that I even commented that "I was sure OSHA wouldn't approve of this." But when
> your on the side of the road & traffic is flying by & your half on the road, half off or close
> to a ditch, sand all over & pieces of tires, nut, bolts, broken bottles, beer cans & other
> assorted roadside trash you're not thinking safety so much as you might be thinking
> what's the quickest way to get this tire changed & get the hell outa here. I guess
> there's always AAA..........................
>
> Happy Holidays Ya'll - George
In the fifties we had to use the dangerous bumper jack to jack the
car up high enough for the tire to clear the fender skirts:
http://www.nls.net/mp/mikemonett/Nash52/Nash52.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jersey wrote:
>
> Ya know come to think, I'm old enough to remember when that was the (standard)
> type of jack that came with all cars & trucks & they did the job but I also remember
> wondering if the thing was going to go flying or slip out from under the car. Also it's
> real easy to get caught up in the moment while changing a flat (or getting yourself
> outa a swamp-hole which may just be the case down here in Florida) but you do get
> caught up & find your self doing things that you wouldn't normally do. To get my Jeep's
> blowout changed the other day we did a couple things that weren't very safe & I remember
> that I even commented that "I was sure OSHA wouldn't approve of this." But when
> your on the side of the road & traffic is flying by & your half on the road, half off or close
> to a ditch, sand all over & pieces of tires, nut, bolts, broken bottles, beer cans & other
> assorted roadside trash you're not thinking safety so much as you might be thinking
> what's the quickest way to get this tire changed & get the hell outa here. I guess
> there's always AAA..........................
>
> Happy Holidays Ya'll - George
#50
Guest
Posts: n/a
Re: Hi-Lift Jack Thread
SIDS victim, cleaned
½ cup cooking oil
Carrots
onions
broccoli
whole cabbage
fresh green beans
potato
turnip
celery
tomato
½ stick butter
1 cup cooked pasta (macaroni, shells, etc.)
Remove as much meat as possible, cube, and brown in hot oil.
Add a little water, season, then add the carcass.
Simmer for half an hour keeping the stock thick.
Remove the carcass and add the vegetables slowly to the stock,
so that it remains boiling the whole time.
Cover the pot and simmer till vegetables are tender
(2 hours approximately).
Continue seasoning to taste.
Before serving, add butter and pasta,
serve piping with hot bread and butter.
Offspring Rolls
Similar to Vietnamese style fried rolls, they have lots of meat
(of course this can consist of chicken, beef, pork, or shrimp).
Who can resist this classic appetizer; or light lunch served with
a fresh salad? Versatility is probably this recipe?s greatest virtue,
as one can use the best part of a prime, rare, yearling, or the
morticians occasional horror: a small miracle stopped short by a
d
½ cup cooking oil
Carrots
onions
broccoli
whole cabbage
fresh green beans
potato
turnip
celery
tomato
½ stick butter
1 cup cooked pasta (macaroni, shells, etc.)
Remove as much meat as possible, cube, and brown in hot oil.
Add a little water, season, then add the carcass.
Simmer for half an hour keeping the stock thick.
Remove the carcass and add the vegetables slowly to the stock,
so that it remains boiling the whole time.
Cover the pot and simmer till vegetables are tender
(2 hours approximately).
Continue seasoning to taste.
Before serving, add butter and pasta,
serve piping with hot bread and butter.
Offspring Rolls
Similar to Vietnamese style fried rolls, they have lots of meat
(of course this can consist of chicken, beef, pork, or shrimp).
Who can resist this classic appetizer; or light lunch served with
a fresh salad? Versatility is probably this recipe?s greatest virtue,
as one can use the best part of a prime, rare, yearling, or the
morticians occasional horror: a small miracle stopped short by a
d