Flushing brake lines
#31
Guest
Posts: n/a
Re: Flushing brake lines
So what is / was the black stuff?
"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:1124113456.6c7a2504e401b45f9c14ec6804000ea2@t eranews...
> The black stuff isn't as bad as the water that can accumulate. That is
> where your pitted cylinder walls and pistons come from.
>
> Earle
>
> "Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
> news:Ji_Le.73048$yC5.31100@tornado.ohiordc.rr.com. ..
>> That's why VW recommends flushing your bake system every two years. I've
>> seen some that were neglected and it looked like tobacco spit!
>>
>> JoBo
>>
>> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> news:6abcf$430018aa$42a1cc8c$20517@FUSE.NET...
>> > Two different clean containers were used. Both systems were flushed
> with
>> > Valvoline Synpower Synthetic Formula brake fluid
>> >
>> > There were also some of these dark floaters in Ed's master cylinder
>> > when
>> > we drained it and they were a bit larger. We drained the reservoirs,
>> > refilled it with new fluid and bled the lines till they ran clear using
>> > the old method where one guy pumps the brake and watched the fluid
>> > level
>> > and the stupid one crawls under the Jeep and opens and closes the bleed
>> > valves.
>> >
>> >
>> >
>> > "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
>> > news:woOdnaju9_XAj53eRVn-tw@comcast.com...
>> >>
>> >> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> >> news:3783d$43000560$42a1cc8c$8984@FUSE.NET...
>> >>> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
>> >>> afternoon.
>> >>>
>> >>> In both our Jeeps when the lines were flushed clean we found small
> black
>> >>> floaters in the drained fluid.
>> >>
>> >> Could have been in the lines, but it could also have been in the
>> >> container you were draining into....
>> >>>
>> >>> On another note when we replaced the air filter in Ed's 4 liter XJ we
>> >>> found the inside of the throttle body to be caked with carbon or
>> >>> soot.
>> >>> What was the cause of that?
>> >>>
>> >> Side effects of the crankcase vent system, probably...not unheard of
>> >> on
> a
>> >> 9-year old engine.
>> >>
>> >>> Billy_Ray@SPAM.fuse.net (remove SPAM)
>> >>> 2002 Jeep WJ 4 Liter Automatic
>> >>> Brilliant Black Crystal Pearl Coat
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:1124113456.6c7a2504e401b45f9c14ec6804000ea2@t eranews...
> The black stuff isn't as bad as the water that can accumulate. That is
> where your pitted cylinder walls and pistons come from.
>
> Earle
>
> "Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
> news:Ji_Le.73048$yC5.31100@tornado.ohiordc.rr.com. ..
>> That's why VW recommends flushing your bake system every two years. I've
>> seen some that were neglected and it looked like tobacco spit!
>>
>> JoBo
>>
>> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> news:6abcf$430018aa$42a1cc8c$20517@FUSE.NET...
>> > Two different clean containers were used. Both systems were flushed
> with
>> > Valvoline Synpower Synthetic Formula brake fluid
>> >
>> > There were also some of these dark floaters in Ed's master cylinder
>> > when
>> > we drained it and they were a bit larger. We drained the reservoirs,
>> > refilled it with new fluid and bled the lines till they ran clear using
>> > the old method where one guy pumps the brake and watched the fluid
>> > level
>> > and the stupid one crawls under the Jeep and opens and closes the bleed
>> > valves.
>> >
>> >
>> >
>> > "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
>> > news:woOdnaju9_XAj53eRVn-tw@comcast.com...
>> >>
>> >> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> >> news:3783d$43000560$42a1cc8c$8984@FUSE.NET...
>> >>> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
>> >>> afternoon.
>> >>>
>> >>> In both our Jeeps when the lines were flushed clean we found small
> black
>> >>> floaters in the drained fluid.
>> >>
>> >> Could have been in the lines, but it could also have been in the
>> >> container you were draining into....
>> >>>
>> >>> On another note when we replaced the air filter in Ed's 4 liter XJ we
>> >>> found the inside of the throttle body to be caked with carbon or
>> >>> soot.
>> >>> What was the cause of that?
>> >>>
>> >> Side effects of the crankcase vent system, probably...not unheard of
>> >> on
> a
>> >> 9-year old engine.
>> >>
>> >>> Billy_Ray@SPAM.fuse.net (remove SPAM)
>> >>> 2002 Jeep WJ 4 Liter Automatic
>> >>> Brilliant Black Crystal Pearl Coat
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
#32
Guest
Posts: n/a
Re: Flushing brake lines
So what is / was the black stuff?
"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:1124113456.6c7a2504e401b45f9c14ec6804000ea2@t eranews...
> The black stuff isn't as bad as the water that can accumulate. That is
> where your pitted cylinder walls and pistons come from.
>
> Earle
>
> "Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
> news:Ji_Le.73048$yC5.31100@tornado.ohiordc.rr.com. ..
>> That's why VW recommends flushing your bake system every two years. I've
>> seen some that were neglected and it looked like tobacco spit!
>>
>> JoBo
>>
>> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> news:6abcf$430018aa$42a1cc8c$20517@FUSE.NET...
>> > Two different clean containers were used. Both systems were flushed
> with
>> > Valvoline Synpower Synthetic Formula brake fluid
>> >
>> > There were also some of these dark floaters in Ed's master cylinder
>> > when
>> > we drained it and they were a bit larger. We drained the reservoirs,
>> > refilled it with new fluid and bled the lines till they ran clear using
>> > the old method where one guy pumps the brake and watched the fluid
>> > level
>> > and the stupid one crawls under the Jeep and opens and closes the bleed
>> > valves.
>> >
>> >
>> >
>> > "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
>> > news:woOdnaju9_XAj53eRVn-tw@comcast.com...
>> >>
>> >> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> >> news:3783d$43000560$42a1cc8c$8984@FUSE.NET...
>> >>> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
>> >>> afternoon.
>> >>>
>> >>> In both our Jeeps when the lines were flushed clean we found small
> black
>> >>> floaters in the drained fluid.
>> >>
>> >> Could have been in the lines, but it could also have been in the
>> >> container you were draining into....
>> >>>
>> >>> On another note when we replaced the air filter in Ed's 4 liter XJ we
>> >>> found the inside of the throttle body to be caked with carbon or
>> >>> soot.
>> >>> What was the cause of that?
>> >>>
>> >> Side effects of the crankcase vent system, probably...not unheard of
>> >> on
> a
>> >> 9-year old engine.
>> >>
>> >>> Billy_Ray@SPAM.fuse.net (remove SPAM)
>> >>> 2002 Jeep WJ 4 Liter Automatic
>> >>> Brilliant Black Crystal Pearl Coat
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:1124113456.6c7a2504e401b45f9c14ec6804000ea2@t eranews...
> The black stuff isn't as bad as the water that can accumulate. That is
> where your pitted cylinder walls and pistons come from.
>
> Earle
>
> "Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
> news:Ji_Le.73048$yC5.31100@tornado.ohiordc.rr.com. ..
>> That's why VW recommends flushing your bake system every two years. I've
>> seen some that were neglected and it looked like tobacco spit!
>>
>> JoBo
>>
>> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> news:6abcf$430018aa$42a1cc8c$20517@FUSE.NET...
>> > Two different clean containers were used. Both systems were flushed
> with
>> > Valvoline Synpower Synthetic Formula brake fluid
>> >
>> > There were also some of these dark floaters in Ed's master cylinder
>> > when
>> > we drained it and they were a bit larger. We drained the reservoirs,
>> > refilled it with new fluid and bled the lines till they ran clear using
>> > the old method where one guy pumps the brake and watched the fluid
>> > level
>> > and the stupid one crawls under the Jeep and opens and closes the bleed
>> > valves.
>> >
>> >
>> >
>> > "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
>> > news:woOdnaju9_XAj53eRVn-tw@comcast.com...
>> >>
>> >> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> >> news:3783d$43000560$42a1cc8c$8984@FUSE.NET...
>> >>> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
>> >>> afternoon.
>> >>>
>> >>> In both our Jeeps when the lines were flushed clean we found small
> black
>> >>> floaters in the drained fluid.
>> >>
>> >> Could have been in the lines, but it could also have been in the
>> >> container you were draining into....
>> >>>
>> >>> On another note when we replaced the air filter in Ed's 4 liter XJ we
>> >>> found the inside of the throttle body to be caked with carbon or
>> >>> soot.
>> >>> What was the cause of that?
>> >>>
>> >> Side effects of the crankcase vent system, probably...not unheard of
>> >> on
> a
>> >> 9-year old engine.
>> >>
>> >>> Billy_Ray@SPAM.fuse.net (remove SPAM)
>> >>> 2002 Jeep WJ 4 Liter Automatic
>> >>> Brilliant Black Crystal Pearl Coat
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
#33
Guest
Posts: n/a
Re: Flushing brake lines
So what is / was the black stuff?
"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:1124113456.6c7a2504e401b45f9c14ec6804000ea2@t eranews...
> The black stuff isn't as bad as the water that can accumulate. That is
> where your pitted cylinder walls and pistons come from.
>
> Earle
>
> "Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
> news:Ji_Le.73048$yC5.31100@tornado.ohiordc.rr.com. ..
>> That's why VW recommends flushing your bake system every two years. I've
>> seen some that were neglected and it looked like tobacco spit!
>>
>> JoBo
>>
>> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> news:6abcf$430018aa$42a1cc8c$20517@FUSE.NET...
>> > Two different clean containers were used. Both systems were flushed
> with
>> > Valvoline Synpower Synthetic Formula brake fluid
>> >
>> > There were also some of these dark floaters in Ed's master cylinder
>> > when
>> > we drained it and they were a bit larger. We drained the reservoirs,
>> > refilled it with new fluid and bled the lines till they ran clear using
>> > the old method where one guy pumps the brake and watched the fluid
>> > level
>> > and the stupid one crawls under the Jeep and opens and closes the bleed
>> > valves.
>> >
>> >
>> >
>> > "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
>> > news:woOdnaju9_XAj53eRVn-tw@comcast.com...
>> >>
>> >> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> >> news:3783d$43000560$42a1cc8c$8984@FUSE.NET...
>> >>> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
>> >>> afternoon.
>> >>>
>> >>> In both our Jeeps when the lines were flushed clean we found small
> black
>> >>> floaters in the drained fluid.
>> >>
>> >> Could have been in the lines, but it could also have been in the
>> >> container you were draining into....
>> >>>
>> >>> On another note when we replaced the air filter in Ed's 4 liter XJ we
>> >>> found the inside of the throttle body to be caked with carbon or
>> >>> soot.
>> >>> What was the cause of that?
>> >>>
>> >> Side effects of the crankcase vent system, probably...not unheard of
>> >> on
> a
>> >> 9-year old engine.
>> >>
>> >>> Billy_Ray@SPAM.fuse.net (remove SPAM)
>> >>> 2002 Jeep WJ 4 Liter Automatic
>> >>> Brilliant Black Crystal Pearl Coat
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
"Earle Horton" <nurse--NOSPAM--busters@msn.com> wrote in message
news:1124113456.6c7a2504e401b45f9c14ec6804000ea2@t eranews...
> The black stuff isn't as bad as the water that can accumulate. That is
> where your pitted cylinder walls and pistons come from.
>
> Earle
>
> "Jo Bo" <jromasSPAM@columbus.rr.com> wrote in message
> news:Ji_Le.73048$yC5.31100@tornado.ohiordc.rr.com. ..
>> That's why VW recommends flushing your bake system every two years. I've
>> seen some that were neglected and it looked like tobacco spit!
>>
>> JoBo
>>
>> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> news:6abcf$430018aa$42a1cc8c$20517@FUSE.NET...
>> > Two different clean containers were used. Both systems were flushed
> with
>> > Valvoline Synpower Synthetic Formula brake fluid
>> >
>> > There were also some of these dark floaters in Ed's master cylinder
>> > when
>> > we drained it and they were a bit larger. We drained the reservoirs,
>> > refilled it with new fluid and bled the lines till they ran clear using
>> > the old method where one guy pumps the brake and watched the fluid
>> > level
>> > and the stupid one crawls under the Jeep and opens and closes the bleed
>> > valves.
>> >
>> >
>> >
>> > "Matt Macchiarolo" <matt@nospamplease.com> wrote in message
>> > news:woOdnaju9_XAj53eRVn-tw@comcast.com...
>> >>
>> >> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
>> >> news:3783d$43000560$42a1cc8c$8984@FUSE.NET...
>> >>> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
>> >>> afternoon.
>> >>>
>> >>> In both our Jeeps when the lines were flushed clean we found small
> black
>> >>> floaters in the drained fluid.
>> >>
>> >> Could have been in the lines, but it could also have been in the
>> >> container you were draining into....
>> >>>
>> >>> On another note when we replaced the air filter in Ed's 4 liter XJ we
>> >>> found the inside of the throttle body to be caked with carbon or
>> >>> soot.
>> >>> What was the cause of that?
>> >>>
>> >> Side effects of the crankcase vent system, probably...not unheard of
>> >> on
> a
>> >> 9-year old engine.
>> >>
>> >>> Billy_Ray@SPAM.fuse.net (remove SPAM)
>> >>> 2002 Jeep WJ 4 Liter Automatic
>> >>> Brilliant Black Crystal Pearl Coat
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
#34
Guest
Posts: n/a
Re: Flushing brake lines
Cup and O-ring wear. Sane reason we change automatic transmissions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
#35
Guest
Posts: n/a
Re: Flushing brake lines
Cup and O-ring wear. Sane reason we change automatic transmissions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
#36
Guest
Posts: n/a
Re: Flushing brake lines
Cup and O-ring wear. Sane reason we change automatic transmissions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
#37
Guest
Posts: n/a
Re: Flushing brake lines
Cup and O-ring wear. Sane reason we change automatic transmissions.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> So what is / was the black stuff?
#38
Guest
Posts: n/a
Re: Flushing brake lines
Ouch....
Those black bits were piston cups or o-rings and whatever component they
came from is going to fail fast. I would be paying close attention to
the brake pedal feel for a while, especially when holding it down at
stops....
Those bits often break off the guts of the MC when doing the 'old'
bleed. (Garages 'love' people that do their own brake flushe$$$) If
the pedal depresses way down as the bleeder is opened, it can force the
piston cups past a rust or wear ridge which can and usually does take
chunks out of old hardened o-rings or cups. The MC then usually fails
soon after.
It isn't so bad on a new master because all the rings and such are still
soft with no rust ridge.
Same thing for black bits can happen after a brake shoe or pad change.
As the pistons are compressed, bits of ring can break off which will
eventually cause a leak failure.
The black crap in the XJ's intake is CCV caused blowby starting
usually. The CCV system is very touchy on those so when the tiny tube
and 'metered' hole get a little gunk in them, the crankcase intake line
starts to feed smoke into the top of the throttle body. It will get bad
enough to start spitting oil onto the air filter in the corner too soon.
Here is a good link on that for him. I just used carb cleaner and a
chunk of wire to clean my CCV tube and a paper clip does the metered
hole in the grommet.
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Billy Ray wrote:
>
> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
> afternoon.
>
> In both our Jeeps when the lines were flushed clean we found small black
> floaters in the drained fluid.
>
> On another note when we replaced the air filter in Ed's 4 liter XJ we found
> the inside of the throttle body to be caked with carbon or soot. What was
> the cause of that?
>
> --
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Brilliant Black Crystal Pearl Coat
Those black bits were piston cups or o-rings and whatever component they
came from is going to fail fast. I would be paying close attention to
the brake pedal feel for a while, especially when holding it down at
stops....
Those bits often break off the guts of the MC when doing the 'old'
bleed. (Garages 'love' people that do their own brake flushe$$$) If
the pedal depresses way down as the bleeder is opened, it can force the
piston cups past a rust or wear ridge which can and usually does take
chunks out of old hardened o-rings or cups. The MC then usually fails
soon after.
It isn't so bad on a new master because all the rings and such are still
soft with no rust ridge.
Same thing for black bits can happen after a brake shoe or pad change.
As the pistons are compressed, bits of ring can break off which will
eventually cause a leak failure.
The black crap in the XJ's intake is CCV caused blowby starting
usually. The CCV system is very touchy on those so when the tiny tube
and 'metered' hole get a little gunk in them, the crankcase intake line
starts to feed smoke into the top of the throttle body. It will get bad
enough to start spitting oil onto the air filter in the corner too soon.
Here is a good link on that for him. I just used carb cleaner and a
chunk of wire to clean my CCV tube and a paper clip does the metered
hole in the grommet.
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Billy Ray wrote:
>
> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
> afternoon.
>
> In both our Jeeps when the lines were flushed clean we found small black
> floaters in the drained fluid.
>
> On another note when we replaced the air filter in Ed's 4 liter XJ we found
> the inside of the throttle body to be caked with carbon or soot. What was
> the cause of that?
>
> --
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Brilliant Black Crystal Pearl Coat
#39
Guest
Posts: n/a
Re: Flushing brake lines
Ouch....
Those black bits were piston cups or o-rings and whatever component they
came from is going to fail fast. I would be paying close attention to
the brake pedal feel for a while, especially when holding it down at
stops....
Those bits often break off the guts of the MC when doing the 'old'
bleed. (Garages 'love' people that do their own brake flushe$$$) If
the pedal depresses way down as the bleeder is opened, it can force the
piston cups past a rust or wear ridge which can and usually does take
chunks out of old hardened o-rings or cups. The MC then usually fails
soon after.
It isn't so bad on a new master because all the rings and such are still
soft with no rust ridge.
Same thing for black bits can happen after a brake shoe or pad change.
As the pistons are compressed, bits of ring can break off which will
eventually cause a leak failure.
The black crap in the XJ's intake is CCV caused blowby starting
usually. The CCV system is very touchy on those so when the tiny tube
and 'metered' hole get a little gunk in them, the crankcase intake line
starts to feed smoke into the top of the throttle body. It will get bad
enough to start spitting oil onto the air filter in the corner too soon.
Here is a good link on that for him. I just used carb cleaner and a
chunk of wire to clean my CCV tube and a paper clip does the metered
hole in the grommet.
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Billy Ray wrote:
>
> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
> afternoon.
>
> In both our Jeeps when the lines were flushed clean we found small black
> floaters in the drained fluid.
>
> On another note when we replaced the air filter in Ed's 4 liter XJ we found
> the inside of the throttle body to be caked with carbon or soot. What was
> the cause of that?
>
> --
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Brilliant Black Crystal Pearl Coat
Those black bits were piston cups or o-rings and whatever component they
came from is going to fail fast. I would be paying close attention to
the brake pedal feel for a while, especially when holding it down at
stops....
Those bits often break off the guts of the MC when doing the 'old'
bleed. (Garages 'love' people that do their own brake flushe$$$) If
the pedal depresses way down as the bleeder is opened, it can force the
piston cups past a rust or wear ridge which can and usually does take
chunks out of old hardened o-rings or cups. The MC then usually fails
soon after.
It isn't so bad on a new master because all the rings and such are still
soft with no rust ridge.
Same thing for black bits can happen after a brake shoe or pad change.
As the pistons are compressed, bits of ring can break off which will
eventually cause a leak failure.
The black crap in the XJ's intake is CCV caused blowby starting
usually. The CCV system is very touchy on those so when the tiny tube
and 'metered' hole get a little gunk in them, the crankcase intake line
starts to feed smoke into the top of the throttle body. It will get bad
enough to start spitting oil onto the air filter in the corner too soon.
Here is a good link on that for him. I just used carb cleaner and a
chunk of wire to clean my CCV tube and a paper clip does the metered
hole in the grommet.
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Billy Ray wrote:
>
> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
> afternoon.
>
> In both our Jeeps when the lines were flushed clean we found small black
> floaters in the drained fluid.
>
> On another note when we replaced the air filter in Ed's 4 liter XJ we found
> the inside of the throttle body to be caked with carbon or soot. What was
> the cause of that?
>
> --
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Brilliant Black Crystal Pearl Coat
#40
Guest
Posts: n/a
Re: Flushing brake lines
Ouch....
Those black bits were piston cups or o-rings and whatever component they
came from is going to fail fast. I would be paying close attention to
the brake pedal feel for a while, especially when holding it down at
stops....
Those bits often break off the guts of the MC when doing the 'old'
bleed. (Garages 'love' people that do their own brake flushe$$$) If
the pedal depresses way down as the bleeder is opened, it can force the
piston cups past a rust or wear ridge which can and usually does take
chunks out of old hardened o-rings or cups. The MC then usually fails
soon after.
It isn't so bad on a new master because all the rings and such are still
soft with no rust ridge.
Same thing for black bits can happen after a brake shoe or pad change.
As the pistons are compressed, bits of ring can break off which will
eventually cause a leak failure.
The black crap in the XJ's intake is CCV caused blowby starting
usually. The CCV system is very touchy on those so when the tiny tube
and 'metered' hole get a little gunk in them, the crankcase intake line
starts to feed smoke into the top of the throttle body. It will get bad
enough to start spitting oil onto the air filter in the corner too soon.
Here is a good link on that for him. I just used carb cleaner and a
chunk of wire to clean my CCV tube and a paper clip does the metered
hole in the grommet.
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Billy Ray wrote:
>
> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
> afternoon.
>
> In both our Jeeps when the lines were flushed clean we found small black
> floaters in the drained fluid.
>
> On another note when we replaced the air filter in Ed's 4 liter XJ we found
> the inside of the throttle body to be caked with carbon or soot. What was
> the cause of that?
>
> --
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Brilliant Black Crystal Pearl Coat
Those black bits were piston cups or o-rings and whatever component they
came from is going to fail fast. I would be paying close attention to
the brake pedal feel for a while, especially when holding it down at
stops....
Those bits often break off the guts of the MC when doing the 'old'
bleed. (Garages 'love' people that do their own brake flushe$$$) If
the pedal depresses way down as the bleeder is opened, it can force the
piston cups past a rust or wear ridge which can and usually does take
chunks out of old hardened o-rings or cups. The MC then usually fails
soon after.
It isn't so bad on a new master because all the rings and such are still
soft with no rust ridge.
Same thing for black bits can happen after a brake shoe or pad change.
As the pistons are compressed, bits of ring can break off which will
eventually cause a leak failure.
The black crap in the XJ's intake is CCV caused blowby starting
usually. The CCV system is very touchy on those so when the tiny tube
and 'metered' hole get a little gunk in them, the crankcase intake line
starts to feed smoke into the top of the throttle body. It will get bad
enough to start spitting oil onto the air filter in the corner too soon.
Here is a good link on that for him. I just used carb cleaner and a
chunk of wire to clean my CCV tube and a paper clip does the metered
hole in the grommet.
http://www.off-road.com/jeep/cheroke...ltr/blowby.htm
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Billy Ray wrote:
>
> My neighbor and I flushed the brakes on his '96 XJ and My '02 WJ this
> afternoon.
>
> In both our Jeeps when the lines were flushed clean we found small black
> floaters in the drained fluid.
>
> On another note when we replaced the air filter in Ed's 4 liter XJ we found
> the inside of the throttle body to be caked with carbon or soot. What was
> the cause of that?
>
> --
> Billy_Ray@SPAM.fuse.net (remove SPAM)
> 2002 Jeep WJ 4 Liter Automatic
> Brilliant Black Crystal Pearl Coat