Dana 30
#31
Guest
Posts: n/a
Re: Dana 30
The STOCK '91 and the STOCK '95 have different vacumn hookups and
wiring. Whatever.
JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>
wiring. Whatever.
JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>
#32
Guest
Posts: n/a
Re: Dana 30
On Feb 20, 9:40 pm, "JimG" <J...@nospam.com> wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?
I'm using my existing disco so it should just bolt right up with no
wiring BS
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?
I'm using my existing disco so it should just bolt right up with no
wiring BS
#33
Guest
Posts: n/a
Re: Dana 30
On Feb 20, 9:40 pm, "JimG" <J...@nospam.com> wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?
I'm using my existing disco so it should just bolt right up with no
wiring BS
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?
I'm using my existing disco so it should just bolt right up with no
wiring BS
#34
Guest
Posts: n/a
Re: Dana 30
On Feb 20, 9:40 pm, "JimG" <J...@nospam.com> wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?
I'm using my existing disco so it should just bolt right up with no
wiring BS
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
> > Part numbers won't match, the '95 has a slightly different vacmumn motor
> > setup. Requires moving the wire from the switch on the firewall down to
> > the switch on the axle. No big deal, just one of those irritating things.
>
> > ufatbastehd wrote:
> >> On Feb 20, 3:30 pm, The Merg wrote:
>
> >>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> >>>don't think they changed those between 91-95.
> >>>I'm just guessing, though.
> >>>Go to a parts website, look up the respective parts for the 91 and the
> >>>95 and see if the part #s match.
>
> >>>ufatbastehd wrote:
>
> >>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> >>>>Can I use the calipers from my 91 on the 95 axle?
>
> >>>>Also does the 95 have the larger TJ style axle ujoints?
>
> >> DOH! why did'nt I think of that?
I'm using my existing disco so it should just bolt right up with no
wiring BS
Thread
Thread Starter
Forum
Replies
Last Post
kodiakid@gmail.com
Jeep Mailing List
32
03-10-2006 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)