Dana 30
#2
Guest
Posts: n/a
Re: Dana 30
'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.
ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.
ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
#3
Guest
Posts: n/a
Re: Dana 30
'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.
ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.
ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
#4
Guest
Posts: n/a
Re: Dana 30
'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.
ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
don't think they changed those between 91-95.
I'm just guessing, though.
Go to a parts website, look up the respective parts for the 91 and the
95 and see if the part #s match.
ufatbastehd wrote:
> I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
#5
Guest
Posts: n/a
Re: Dana 30
Not sure about the u-joints but the calipers will work. I just did this
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
#6
Guest
Posts: n/a
Re: Dana 30
Not sure about the u-joints but the calipers will work. I just did this
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
#7
Guest
Posts: n/a
Re: Dana 30
Not sure about the u-joints but the calipers will work. I just did this
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
"ufatbastehd" wrote in message...
>I may get a Dana 30 out of a 95YJ for my 91 YJ.
> Can I use the calipers from my 91 on the 95 axle?
>
>
> Also does the 95 have the larger TJ style axle ujoints?
>
#8
Guest
Posts: n/a
Re: Dana 30
On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?
DOH! why did'nt I think of that?
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?
DOH! why did'nt I think of that?
#9
Guest
Posts: n/a
Re: Dana 30
On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?
DOH! why did'nt I think of that?
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?
DOH! why did'nt I think of that?
#10
Guest
Posts: n/a
Re: Dana 30
On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?
DOH! why did'nt I think of that?
> '95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
> don't think they changed those between 91-95.
> I'm just guessing, though.
> Go to a parts website, look up the respective parts for the 91 and the
> 95 and see if the part #s match.
>
> ufatbastehd wrote:
> > I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?
DOH! why did'nt I think of that?