95 they went to 297 Ujoints, 260 prior to that.

"JimG" <JimG@nospam.com> wrote in message
news:eVICh.3235$B25.3163@news01.roc.ny...
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
>
> "ufatbastehd" wrote in message...
>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>> Can I use the calipers from my 91 on the 95 axle?
>>
>>
>> Also does the 95 have the larger TJ style axle ujoints?
>>
>
>

 

95 they went to 297 Ujoints, 260 prior to that.

"JimG" <JimG@nospam.com> wrote in message
news:eVICh.3235$B25.3163@news01.roc.ny...
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
>
> "ufatbastehd" wrote in message...
>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>> Can I use the calipers from my 91 on the 95 axle?
>>
>>
>> Also does the 95 have the larger TJ style axle ujoints?
>>
>
>

 

95 they went to 297 Ujoints, 260 prior to that.

"JimG" <JimG@nospam.com> wrote in message
news:eVICh.3235$B25.3163@news01.roc.ny...
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
>
> "ufatbastehd" wrote in message...
>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>> Can I use the calipers from my 91 on the 95 axle?
>>
>>
>> Also does the 95 have the larger TJ style axle ujoints?
>>
>
>

 

On Feb 20, 3:32 pm, "JimG" <J...@nospam.com> wrote:
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
> "ufatbastehd" wrote in message...
> >I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?

Thanks

 

On Feb 20, 3:32 pm, "JimG" <J...@nospam.com> wrote:
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
> "ufatbastehd" wrote in message...
> >I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?

Thanks

 

On Feb 20, 3:32 pm, "JimG" <J...@nospam.com> wrote:
> Not sure about the u-joints but the calipers will work. I just did this
> same swap on my sons 91 YJ... put in a 95 axle set for the 4.11 gears.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> 4.56 Gears, TrueTrac rear
> 33" BFG AT on 15x8 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
> Warn X8000i
>
> "ufatbastehd" wrote in message...
> >I may get a Dana 30 out of a 95YJ for my 91 YJ.
> > Can I use the calipers from my 91 on the 95 axle?
>
> > Also does the 95 have the larger TJ style axle ujoints?

Thanks

 

Part numbers won't match, the '95 has a slightly different vacmumn motor
setup. Requires moving the wire from the switch on the firewall down to
the switch on the axle. No big deal, just one of those irritating things.

ufatbastehd wrote:
> On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
>
>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>don't think they changed those between 91-95.
>>I'm just guessing, though.
>>Go to a parts website, look up the respective parts for the 91 and the
>>95 and see if the part #s match.
>>
>>ufatbastehd wrote:
>>
>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>Can I use the calipers from my 91 on the 95 axle?
>>
>>>Also does the 95 have the larger TJ style axle ujoints?
>
>
>
>
> DOH! why did'nt I think of that?
>

 

Part numbers won't match, the '95 has a slightly different vacmumn motor
setup. Requires moving the wire from the switch on the firewall down to
the switch on the axle. No big deal, just one of those irritating things.

ufatbastehd wrote:
> On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
>
>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>don't think they changed those between 91-95.
>>I'm just guessing, though.
>>Go to a parts website, look up the respective parts for the 91 and the
>>95 and see if the part #s match.
>>
>>ufatbastehd wrote:
>>
>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>Can I use the calipers from my 91 on the 95 axle?
>>
>>>Also does the 95 have the larger TJ style axle ujoints?
>
>
>
>
> DOH! why did'nt I think of that?
>

 

Part numbers won't match, the '95 has a slightly different vacmumn motor
setup. Requires moving the wire from the switch on the firewall down to
the switch on the axle. No big deal, just one of those irritating things.

ufatbastehd wrote:
> On Feb 20, 3:30 pm, The Merg <greg.merg...@REMOVEgmail.com> wrote:
>
>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>don't think they changed those between 91-95.
>>I'm just guessing, though.
>>Go to a parts website, look up the respective parts for the 91 and the
>>95 and see if the part #s match.
>>
>>ufatbastehd wrote:
>>
>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>Can I use the calipers from my 91 on the 95 axle?
>>
>>>Also does the 95 have the larger TJ style axle ujoints?
>
>
>
>
> DOH! why did'nt I think of that?
>

 

I did not have to do that... same hook-up on the vacuum disconnect as the 91
axle.

"RoyJ" < wrote in message...
> Part numbers won't match, the '95 has a slightly different vacmumn motor
> setup. Requires moving the wire from the switch on the firewall down to
> the switch on the axle. No big deal, just one of those irritating things.
>
> ufatbastehd wrote:
>> On Feb 20, 3:30 pm, The Merg wrote:
>>
>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>don't think they changed those between 91-95.
>>>I'm just guessing, though.
>>>Go to a parts website, look up the respective parts for the 91 and the
>>>95 and see if the part #s match.
>>>
>>>ufatbastehd wrote:
>>>
>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>Can I use the calipers from my 91 on the 95 axle?
>>>
>>>>Also does the 95 have the larger TJ style axle ujoints?
>>
>>
>>
>>
>> DOH! why did'nt I think of that?
>>