Dana 30
02-20-2007, 09:40 PM
#21
Guest
Posts: n/a
Re: Dana 30
I did not have to do that... same hook-up on the vacuum disconnect as the 91
axle.
"RoyJ" < wrote in message...
> Part numbers won't match, the '95 has a slightly different vacmumn motor
> setup. Requires moving the wire from the switch on the firewall down to
> the switch on the axle. No big deal, just one of those irritating things.
>
> ufatbastehd wrote:
>> On Feb 20, 3:30 pm, The Merg wrote:
>>
>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>don't think they changed those between 91-95.
>>>I'm just guessing, though.
>>>Go to a parts website, look up the respective parts for the 91 and the
>>>95 and see if the part #s match.
>>>
>>>ufatbastehd wrote:
>>>
>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>Can I use the calipers from my 91 on the 95 axle?
>>>
>>>>Also does the 95 have the larger TJ style axle ujoints?
>>
>>
>>
>>
>> DOH! why did'nt I think of that?
>>
axle.
"RoyJ" < wrote in message...
> Part numbers won't match, the '95 has a slightly different vacmumn motor
> setup. Requires moving the wire from the switch on the firewall down to
> the switch on the axle. No big deal, just one of those irritating things.
>
> ufatbastehd wrote:
>> On Feb 20, 3:30 pm, The Merg wrote:
>>
>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>don't think they changed those between 91-95.
>>>I'm just guessing, though.
>>>Go to a parts website, look up the respective parts for the 91 and the
>>>95 and see if the part #s match.
>>>
>>>ufatbastehd wrote:
>>>
>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>Can I use the calipers from my 91 on the 95 axle?
>>>
>>>>Also does the 95 have the larger TJ style axle ujoints?
>>
>>
>>
>>
>> DOH! why did'nt I think of that?
>>
02-20-2007, 09:40 PM
#22
Guest
Posts: n/a
Re: Dana 30
I did not have to do that... same hook-up on the vacuum disconnect as the 91
axle.
"RoyJ" < wrote in message...
> Part numbers won't match, the '95 has a slightly different vacmumn motor
> setup. Requires moving the wire from the switch on the firewall down to
> the switch on the axle. No big deal, just one of those irritating things.
>
> ufatbastehd wrote:
>> On Feb 20, 3:30 pm, The Merg wrote:
>>
>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>don't think they changed those between 91-95.
>>>I'm just guessing, though.
>>>Go to a parts website, look up the respective parts for the 91 and the
>>>95 and see if the part #s match.
>>>
>>>ufatbastehd wrote:
>>>
>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>Can I use the calipers from my 91 on the 95 axle?
>>>
>>>>Also does the 95 have the larger TJ style axle ujoints?
>>
>>
>>
>>
>> DOH! why did'nt I think of that?
>>
axle.
"RoyJ" < wrote in message...
> Part numbers won't match, the '95 has a slightly different vacmumn motor
> setup. Requires moving the wire from the switch on the firewall down to
> the switch on the axle. No big deal, just one of those irritating things.
>
> ufatbastehd wrote:
>> On Feb 20, 3:30 pm, The Merg wrote:
>>
>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>don't think they changed those between 91-95.
>>>I'm just guessing, though.
>>>Go to a parts website, look up the respective parts for the 91 and the
>>>95 and see if the part #s match.
>>>
>>>ufatbastehd wrote:
>>>
>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>Can I use the calipers from my 91 on the 95 axle?
>>>
>>>>Also does the 95 have the larger TJ style axle ujoints?
>>
>>
>>
>>
>> DOH! why did'nt I think of that?
>>
02-20-2007, 11:18 PM
#23
Guest
Posts: n/a
Re: Dana 30
Hook up is the same, but you don't have the '4wd' light on the dash.
JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>
JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>
02-20-2007, 11:18 PM
#24
Guest
Posts: n/a
Re: Dana 30
Hook up is the same, but you don't have the '4wd' light on the dash.
JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>
JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>
02-20-2007, 11:18 PM
#25
Guest
Posts: n/a
Re: Dana 30
Hook up is the same, but you don't have the '4wd' light on the dash.
JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>
JimG wrote:
> I did not have to do that... same hook-up on the vacuum disconnect as the 91
> axle.
>
> "RoyJ" < wrote in message...
>
>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>setup. Requires moving the wire from the switch on the firewall down to
>>the switch on the axle. No big deal, just one of those irritating things.
>>
>>ufatbastehd wrote:
>>
>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>
>>>
>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers. I
>>>>don't think they changed those between 91-95.
>>>>I'm just guessing, though.
>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>95 and see if the part #s match.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>
>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>
>>>
>>>
>>>
>>>DOH! why did'nt I think of that?
>>>
>
>
>
02-21-2007, 08:19 AM
#26
Guest
Posts: n/a
Re: Dana 30
Sure do... works fine.
"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>
"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>
02-21-2007, 08:19 AM
#27
Guest
Posts: n/a
Re: Dana 30
Sure do... works fine.
"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>
"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>
02-21-2007, 08:19 AM
#28
Guest
Posts: n/a
Re: Dana 30
Sure do... works fine.
"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>
"RoyJ" wrote in message...
> Hook up is the same, but you don't have the '4wd' light on the dash.
>
> JimG wrote:
>> I did not have to do that... same hook-up on the vacuum disconnect as the
>> 91 axle.
>>
>> "RoyJ" < wrote in message...
>>
>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>setup. Requires moving the wire from the switch on the firewall down to
>>>the switch on the axle. No big deal, just one of those irritating things.
>>>
>>>ufatbastehd wrote:
>>>
>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>
>>>>
>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>I
>>>>>don't think they changed those between 91-95.
>>>>>I'm just guessing, though.
>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>95 and see if the part #s match.
>>>>>
>>>>>ufatbastehd wrote:
>>>>>
>>>>>
>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>
>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>
>>>>
>>>>
>>>>
>>>>DOH! why did'nt I think of that?
>>>>
>>
>>
02-21-2007, 09:21 AM
#29
Guest
Posts: n/a
Re: Dana 30
The STOCK '91 and the STOCK '95 have different vacumn hookups and
wiring. Whatever.
JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>
wiring. Whatever.
JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>
02-21-2007, 09:21 AM
#30
Guest
Posts: n/a
Re: Dana 30
The STOCK '91 and the STOCK '95 have different vacumn hookups and
wiring. Whatever.
JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>
wiring. Whatever.
JimG wrote:
> Sure do... works fine.
>
> "RoyJ" wrote in message...
>
>>Hook up is the same, but you don't have the '4wd' light on the dash.
>>
>>JimG wrote:
>>
>>>I did not have to do that... same hook-up on the vacuum disconnect as the
>>>91 axle.
>>>
>>>"RoyJ" < wrote in message...
>>>
>>>
>>>>Part numbers won't match, the '95 has a slightly different vacmumn motor
>>>>setup. Requires moving the wire from the switch on the firewall down to
>>>>the switch on the axle. No big deal, just one of those irritating things.
>>>>
>>>>ufatbastehd wrote:
>>>>
>>>>
>>>>>On Feb 20, 3:30 pm, The Merg wrote:
>>>>>
>>>>>
>>>>>
>>>>>>'95 is a YJ, so hypothetically it uses the same ujoints and calipers.
>>>>>>I
>>>>>>don't think they changed those between 91-95.
>>>>>>I'm just guessing, though.
>>>>>>Go to a parts website, look up the respective parts for the 91 and the
>>>>>>95 and see if the part #s match.
>>>>>>
>>>>>>ufatbastehd wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I may get a Dana 30 out of a 95YJ for my 91 YJ.
>>>>>>>Can I use the calipers from my 91 on the 95 axle?
>>>>>>
>>>>>>>Also does the 95 have the larger TJ style axle ujoints?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>DOH! why did'nt I think of that?
>>>>>
>>>
>>>
>