Peter Stolz

"SnoMan" <admin@snoman.com> wrote in message
news:6t7v739d62ursmuglr69aq30l2cd312nuu@4ax.com...
> On Sun, 24 Jun 2007 21:15:46 -0500, "Peter Stolz"
> <pstolz@sbcglobal.net> wrote:
>
>>Thanks for the help! I'll check all that stuff and maybe I can put off
>>the
>>one piece for a while. I'm running in sleeper mode at stock height with
>>only 31" BFG MT KM right now, but I figured with the power that's in front
>>of the axle, the two piece design might be failing.
>>Pete
>>--
>>'84 CJ7 with factory rebuilt 360, NV4500, Edelbrock carb & intake,
>>headers,
>>2.5" duals, homemade on-board air, etc...
>>'04 Audi S4 that's bone stock
>
>
> I like your driveline setup. What version of the NV4500 did you use
> and which Tcase did you mate it with? Did you "cam" your 360? (I
> assume AMC 360) You are definatly pressing the limits of your AMC 20 2
> piece rear axle with your engine/tranny setup. THere was a time when
> the AMC 401 was a real hot ticket in a Jeep but those engines are hard
> to come by theses days. 360 is a good engine as I have a 28 year old
> on in a old J20 truck that still runs well. I plan to restore truck
> one day (I have owned it for 22 years) It is a in storage in the barn
> right now and has not been on the road for a few years now since
> exhaust system rusted out. One thing that was nice about my old J20 is
> that it came from factory with altitude compensanting carb which you
> do not see many of OEM. I can tell you it worked great because when I
> had it out in rockies in mid 90's I had no idle or mixture problems
> from sea level to over 10,000 feet.
> -----------------
> TheSnoMan.com
>

Sorry it took so long to reply. I was out of town workin'. The 4500 is the
newer Dodge (not sure of any proper designation) with the 5.61 first gear.
The older ones had I think a 6.34 or something close. I couldn't get that
anymore, so I ordered up mine from JB Conversions. I tried to find a 401 at
the time (1996ish) but the only one available was a short block in Idaho.
That's like a 1000 miles away so I called the boneyards around here and
found a long block AMC 360 from an '82 Waggy that was literally two miles
from my house. They charged me $125 for it and they even left the AC
compressor on it. I got the hell out of there as fast as I could before the
figured it out. I then used that compressor to build my own on-board air
system. I sent the block off to Gopher for a new rebuilt. I have a Comp
cam for it sitting on my bench in the garage, but haven't had time to put
her in yet.
Pete

Peter Stolz

Oh, yeah, and I'm running the stock Dana 300 Tcase.


"SnoMan" <admin@snoman.com> wrote in message
news:6t7v739d62ursmuglr69aq30l2cd312nuu@4ax.com...
> On Sun, 24 Jun 2007 21:15:46 -0500, "Peter Stolz"
> <pstolz@sbcglobal.net> wrote:
>
>>Thanks for the help! I'll check all that stuff and maybe I can put off
>>the
>>one piece for a while. I'm running in sleeper mode at stock height with
>>only 31" BFG MT KM right now, but I figured with the power that's in front
>>of the axle, the two piece design might be failing.
>>Pete
>>--
>>'84 CJ7 with factory rebuilt 360, NV4500, Edelbrock carb & intake,
>>headers,
>>2.5" duals, homemade on-board air, etc...
>>'04 Audi S4 that's bone stock
>
>
> I like your driveline setup. What version of the NV4500 did you use
> and which Tcase did you mate it with? Did you "cam" your 360? (I
> assume AMC 360) You are definatly pressing the limits of your AMC 20 2
> piece rear axle with your engine/tranny setup. THere was a time when
> the AMC 401 was a real hot ticket in a Jeep but those engines are hard
> to come by theses days. 360 is a good engine as I have a 28 year old
> on in a old J20 truck that still runs well. I plan to restore truck
> one day (I have owned it for 22 years) It is a in storage in the barn
> right now and has not been on the road for a few years now since
> exhaust system rusted out. One thing that was nice about my old J20 is
> that it came from factory with altitude compensanting carb which you
> do not see many of OEM. I can tell you it worked great because when I
> had it out in rockies in mid 90's I had no idle or mixture problems
> from sea level to over 10,000 feet.
> -----------------
> TheSnoMan.com
>

Peter Stolz

Oh, yeah, and I'm running the stock Dana 300 Tcase.


"SnoMan" <admin@snoman.com> wrote in message
news:6t7v739d62ursmuglr69aq30l2cd312nuu@4ax.com...
> On Sun, 24 Jun 2007 21:15:46 -0500, "Peter Stolz"
> <pstolz@sbcglobal.net> wrote:
>
>>Thanks for the help! I'll check all that stuff and maybe I can put off
>>the
>>one piece for a while. I'm running in sleeper mode at stock height with
>>only 31" BFG MT KM right now, but I figured with the power that's in front
>>of the axle, the two piece design might be failing.
>>Pete
>>--
>>'84 CJ7 with factory rebuilt 360, NV4500, Edelbrock carb & intake,
>>headers,
>>2.5" duals, homemade on-board air, etc...
>>'04 Audi S4 that's bone stock
>
>
> I like your driveline setup. What version of the NV4500 did you use
> and which Tcase did you mate it with? Did you "cam" your 360? (I
> assume AMC 360) You are definatly pressing the limits of your AMC 20 2
> piece rear axle with your engine/tranny setup. THere was a time when
> the AMC 401 was a real hot ticket in a Jeep but those engines are hard
> to come by theses days. 360 is a good engine as I have a 28 year old
> on in a old J20 truck that still runs well. I plan to restore truck
> one day (I have owned it for 22 years) It is a in storage in the barn
> right now and has not been on the road for a few years now since
> exhaust system rusted out. One thing that was nice about my old J20 is
> that it came from factory with altitude compensanting carb which you
> do not see many of OEM. I can tell you it worked great because when I
> had it out in rockies in mid 90's I had no idle or mixture problems
> from sea level to over 10,000 feet.
> -----------------
> TheSnoMan.com
>

Peter Stolz

Oh, yeah, and I'm running the stock Dana 300 Tcase.


"SnoMan" <admin@snoman.com> wrote in message
news:6t7v739d62ursmuglr69aq30l2cd312nuu@4ax.com...
> On Sun, 24 Jun 2007 21:15:46 -0500, "Peter Stolz"
> <pstolz@sbcglobal.net> wrote:
>
>>Thanks for the help! I'll check all that stuff and maybe I can put off
>>the
>>one piece for a while. I'm running in sleeper mode at stock height with
>>only 31" BFG MT KM right now, but I figured with the power that's in front
>>of the axle, the two piece design might be failing.
>>Pete
>>--
>>'84 CJ7 with factory rebuilt 360, NV4500, Edelbrock carb & intake,
>>headers,
>>2.5" duals, homemade on-board air, etc...
>>'04 Audi S4 that's bone stock
>
>
> I like your driveline setup. What version of the NV4500 did you use
> and which Tcase did you mate it with? Did you "cam" your 360? (I
> assume AMC 360) You are definatly pressing the limits of your AMC 20 2
> piece rear axle with your engine/tranny setup. THere was a time when
> the AMC 401 was a real hot ticket in a Jeep but those engines are hard
> to come by theses days. 360 is a good engine as I have a 28 year old
> on in a old J20 truck that still runs well. I plan to restore truck
> one day (I have owned it for 22 years) It is a in storage in the barn
> right now and has not been on the road for a few years now since
> exhaust system rusted out. One thing that was nice about my old J20 is
> that it came from factory with altitude compensanting carb which you
> do not see many of OEM. I can tell you it worked great because when I
> had it out in rockies in mid 90's I had no idle or mixture problems
> from sea level to over 10,000 feet.
> -----------------
> TheSnoMan.com
>

Peter Stolz

Oh, yeah, and I'm running the stock Dana 300 Tcase.


"SnoMan" <admin@snoman.com> wrote in message
news:6t7v739d62ursmuglr69aq30l2cd312nuu@4ax.com...
> On Sun, 24 Jun 2007 21:15:46 -0500, "Peter Stolz"
> <pstolz@sbcglobal.net> wrote:
>
>>Thanks for the help! I'll check all that stuff and maybe I can put off
>>the
>>one piece for a while. I'm running in sleeper mode at stock height with
>>only 31" BFG MT KM right now, but I figured with the power that's in front
>>of the axle, the two piece design might be failing.
>>Pete
>>--
>>'84 CJ7 with factory rebuilt 360, NV4500, Edelbrock carb & intake,
>>headers,
>>2.5" duals, homemade on-board air, etc...
>>'04 Audi S4 that's bone stock
>
>
> I like your driveline setup. What version of the NV4500 did you use
> and which Tcase did you mate it with? Did you "cam" your 360? (I
> assume AMC 360) You are definatly pressing the limits of your AMC 20 2
> piece rear axle with your engine/tranny setup. THere was a time when
> the AMC 401 was a real hot ticket in a Jeep but those engines are hard
> to come by theses days. 360 is a good engine as I have a 28 year old
> on in a old J20 truck that still runs well. I plan to restore truck
> one day (I have owned it for 22 years) It is a in storage in the barn
> right now and has not been on the road for a few years now since
> exhaust system rusted out. One thing that was nice about my old J20 is
> that it came from factory with altitude compensanting carb which you
> do not see many of OEM. I can tell you it worked great because when I
> had it out in rockies in mid 90's I had no idle or mixture problems
> from sea level to over 10,000 feet.
> -----------------
> TheSnoMan.com
>