angle wedge on Rubicon lift
05-01-2005, 01:23 AM
#21
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:bf64151ed1f943e3bf7b6d96c3a359dd@CarKB.com...
> But if I put the wedge in the front(thick part forward) wouldn't this
> cause
> the pinion to point down?
only if youve already done an SOA lift. if your springs are under your
axle, the thick part in front will raise your pinion. if your springs are
over your axle, thick part in the front would lower your pinion.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:bf64151ed1f943e3bf7b6d96c3a359dd@CarKB.com...
> But if I put the wedge in the front(thick part forward) wouldn't this
> cause
> the pinion to point down?
only if youve already done an SOA lift. if your springs are under your
axle, the thick part in front will raise your pinion. if your springs are
over your axle, thick part in the front would lower your pinion.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
05-01-2005, 09:21 AM
#22
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
You 'really' need to learn how to ask the correct question.....
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
05-01-2005, 09:21 AM
#23
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
You 'really' need to learn how to ask the correct question.....
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
05-01-2005, 09:21 AM
#24
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
You 'really' need to learn how to ask the correct question.....
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
05-01-2005, 09:21 AM
#25
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
You 'really' need to learn how to ask the correct question.....
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
I answered you once already yesterday, I guess you didn't believe me.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> 89 YJ installing my lift, have angle wedges (degree spacers) for between
> the axle and the spring. Which way do they go?? Thick part in front or
> towards the back???
>
> --
> Message posted via http://www.carkb.com
05-01-2005, 11:59 AM
#26
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
sorry mike, I'll go look for it. I did make a posting but didn't see where
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
05-01-2005, 11:59 AM
#27
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
sorry mike, I'll go look for it. I did make a posting but didn't see where
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
05-01-2005, 11:59 AM
#28
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
sorry mike, I'll go look for it. I did make a posting but didn't see where
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
05-01-2005, 11:59 AM
#29
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
sorry mike, I'll go look for it. I did make a posting but didn't see where
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
it was posted, so I posted again....
I think it's my computer is slow. I answered bill twice yesterday.....
--
Message posted via http://www.carkb.com
05-01-2005, 12:33 PM
#30
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
That happens, but having 3 or 4 threads going on about the same thing
can be bad news. Folks are giving you bad advice because they don't
know what you are asking or have figured out in one of the other
threads.
Your front driveshaft already has a CV or 'double cardan' joint so the
diff is supposed to point straight at it with the weight of the Jeep on
the springs but depending on how high you are, this can really wreck the
front end alignment so you need a compromise.
I think the wedges are to line up the steering, not the driveshaft now
that you posted about longer shackles I 'think' I saw in one of the
threads???
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> sorry mike, I'll go look for it. I did make a posting but didn't see where
> it was posted, so I posted again....
> I think it's my computer is slow. I answered bill twice yesterday.....
>
> --
> Message posted via http://www.carkb.com
can be bad news. Folks are giving you bad advice because they don't
know what you are asking or have figured out in one of the other
threads.
Your front driveshaft already has a CV or 'double cardan' joint so the
diff is supposed to point straight at it with the weight of the Jeep on
the springs but depending on how high you are, this can really wreck the
front end alignment so you need a compromise.
I think the wedges are to line up the steering, not the driveshaft now
that you posted about longer shackles I 'think' I saw in one of the
threads???
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
"Robb S via CarKB.com" wrote:
>
> sorry mike, I'll go look for it. I did make a posting but didn't see where
> it was posted, so I posted again....
> I think it's my computer is slow. I answered bill twice yesterday.....
>
> --
> Message posted via http://www.carkb.com