angle wedge on Rubicon lift
#141
Guest
Posts: n/a
Re: angle wedge on Rubicon lift
I recently installed the RE 4 inch standard lift kit..it comes with a 4
degree shim as well....i have puchased more shim..its now shimmed to 8
degrees and still have a vibration at 70 kph.....
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4278C5BE.8AD1974D@sympatico.ca...
> You are not making sense....
>
> No drag link, no steering.
>
> No shims up front with longer shackles means you cannot drive faster
> than 30 mph and still be able to steer.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Robb S via CarKB.com" wrote:
>>
>> after speaking with rubicon about being sent only 1 set of 4 degree
>> shims,
>> they tell me they are for the rear and not the front. They did away with
>> the front because everyone just goes and get a cv driveshaft. What to do
>> until then, who knows...LOL anyway, their suggestion is to do away with
>> the drag link all together...
>>
>> --
>> Message posted via http://www.carkb.com
degree shim as well....i have puchased more shim..its now shimmed to 8
degrees and still have a vibration at 70 kph.....
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4278C5BE.8AD1974D@sympatico.ca...
> You are not making sense....
>
> No drag link, no steering.
>
> No shims up front with longer shackles means you cannot drive faster
> than 30 mph and still be able to steer.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Robb S via CarKB.com" wrote:
>>
>> after speaking with rubicon about being sent only 1 set of 4 degree
>> shims,
>> they tell me they are for the rear and not the front. They did away with
>> the front because everyone just goes and get a cv driveshaft. What to do
>> until then, who knows...LOL anyway, their suggestion is to do away with
>> the drag link all together...
>>
>> --
>> Message posted via http://www.carkb.com
Thread
Thread Starter
Forum
Replies
Last Post
Davenport
Jeep Mailing List
6
03-26-2006 05:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)