97 jeep grand cherokee abs issue
02-07-2007, 08:16 AM
#11
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
I am not sure why you are working on the ABS system, did it exhibit
some sort of problem?
All I can find on a Trouble Code 30 refers to an Oxygen Sensor
fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
If that is correct, you need to replace that Sensor.
Good Luck, Bruce
02-07-2007, 08:16 AM
#12
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
I am not sure why you are working on the ABS system, did it exhibit
some sort of problem?
All I can find on a Trouble Code 30 refers to an Oxygen Sensor
fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
If that is correct, you need to replace that Sensor.
Good Luck, Bruce
02-07-2007, 08:16 AM
#13
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
I am not sure why you are working on the ABS system, did it exhibit
some sort of problem?
All I can find on a Trouble Code 30 refers to an Oxygen Sensor
fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
If that is correct, you need to replace that Sensor.
Good Luck, Bruce
02-07-2007, 02:27 PM
#14
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
yes. the abs light is on and it is an abs code 30. unfortunately, no manual
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
02-07-2007, 02:27 PM
#15
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
yes. the abs light is on and it is an abs code 30. unfortunately, no manual
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
02-07-2007, 02:27 PM
#16
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
yes. the abs light is on and it is an abs code 30. unfortunately, no manual
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
02-07-2007, 02:27 PM
#17
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
yes. the abs light is on and it is an abs code 30. unfortunately, no manual
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
that i have seen has the abs codes in it...we got this code from the
diagnostic computer when we plugged it into the obd port on the car.
thanks.
Highcountry wrote:
>I am not sure why you are working on the ABS system, did it exhibit
>some sort of problem?
>
>All I can find on a Trouble Code 30 refers to an Oxygen Sensor
>fault. Specifically in the Pre-Heat portion of the Oxygen Sensor.
>If that is correct, you need to replace that Sensor.
>
>Good Luck, Bruce
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
02-07-2007, 09:08 PM
#18
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
does the module have 12 volts with on going to it and how about ground????
"mwfaith1971 via CarKB.com" wrote:
> my jeep has a code 30 on the abs (pump motor circuit bad). we have done
> diagnostics on the system and have come to the conclusion that the CAB is the
> problem. (hotwired the pump and there's nothing wrong with it and traced and
> tested all wires - again, nothing wrong). would there be anything else that
> could be the cause of the problem that we may have missed or should i get the
> CAB remanned and see what happens?
>
> thanks
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
"mwfaith1971 via CarKB.com" wrote:
> my jeep has a code 30 on the abs (pump motor circuit bad). we have done
> diagnostics on the system and have come to the conclusion that the CAB is the
> problem. (hotwired the pump and there's nothing wrong with it and traced and
> tested all wires - again, nothing wrong). would there be anything else that
> could be the cause of the problem that we may have missed or should i get the
> CAB remanned and see what happens?
>
> thanks
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
02-07-2007, 09:08 PM
#19
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
does the module have 12 volts with on going to it and how about ground????
"mwfaith1971 via CarKB.com" wrote:
> my jeep has a code 30 on the abs (pump motor circuit bad). we have done
> diagnostics on the system and have come to the conclusion that the CAB is the
> problem. (hotwired the pump and there's nothing wrong with it and traced and
> tested all wires - again, nothing wrong). would there be anything else that
> could be the cause of the problem that we may have missed or should i get the
> CAB remanned and see what happens?
>
> thanks
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
"mwfaith1971 via CarKB.com" wrote:
> my jeep has a code 30 on the abs (pump motor circuit bad). we have done
> diagnostics on the system and have come to the conclusion that the CAB is the
> problem. (hotwired the pump and there's nothing wrong with it and traced and
> tested all wires - again, nothing wrong). would there be anything else that
> could be the cause of the problem that we may have missed or should i get the
> CAB remanned and see what happens?
>
> thanks
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
02-07-2007, 09:08 PM
#20
Guest
Posts: n/a
Re: 97 jeep grand cherokee abs issue
does the module have 12 volts with on going to it and how about ground????
"mwfaith1971 via CarKB.com" wrote:
> my jeep has a code 30 on the abs (pump motor circuit bad). we have done
> diagnostics on the system and have come to the conclusion that the CAB is the
> problem. (hotwired the pump and there's nothing wrong with it and traced and
> tested all wires - again, nothing wrong). would there be anything else that
> could be the cause of the problem that we may have missed or should i get the
> CAB remanned and see what happens?
>
> thanks
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1
"mwfaith1971 via CarKB.com" wrote:
> my jeep has a code 30 on the abs (pump motor circuit bad). we have done
> diagnostics on the system and have come to the conclusion that the CAB is the
> problem. (hotwired the pump and there's nothing wrong with it and traced and
> tested all wires - again, nothing wrong). would there be anything else that
> could be the cause of the problem that we may have missed or should i get the
> CAB remanned and see what happens?
>
> thanks
>
> --
> Message posted via CarKB.com
> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200702/1