'93 Grand cherokee start problem.
10-10-2005, 10:07 AM
#41
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
Ron Croonenberg did pass the time by typing:
> the setup in my ZJ looks like the one in the pics sent by Bill ------.
>
> http://members.***.net/wilsond/Fixes...tml#CPSdetails
Most will, that's my ZJ with the 42RE transmission.
That one connects by the dipstick tube on the passenger side.
> Billy Ray wrote:
>
>> Well.... could be. Most of the other references have it on the passenger
>> side and I sure gave a good look there for it.
>>
>> After taking a break and looking around underneath we found it on the
>> driver's side and the wiring ran up to a connector on the intake manifold.
>>
>> http://www.imagestation.com/album/?id=2119338336
That is the other one, there were two transmissions that year.
http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
And your correct, that sensor will be connected by the manifold.
This will give you some ideas on how to get that sucker out.
http://members.***.net/wilsond/cps/
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> the setup in my ZJ looks like the one in the pics sent by Bill ------.
>
> http://members.***.net/wilsond/Fixes...tml#CPSdetails
Most will, that's my ZJ with the 42RE transmission.
That one connects by the dipstick tube on the passenger side.
> Billy Ray wrote:
>
>> Well.... could be. Most of the other references have it on the passenger
>> side and I sure gave a good look there for it.
>>
>> After taking a break and looking around underneath we found it on the
>> driver's side and the wiring ran up to a connector on the intake manifold.
>>
>> http://www.imagestation.com/album/?id=2119338336
That is the other one, there were two transmissions that year.
http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
And your correct, that sensor will be connected by the manifold.
This will give you some ideas on how to get that sucker out.
http://members.***.net/wilsond/cps/
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
10-10-2005, 10:07 AM
#42
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
Ron Croonenberg did pass the time by typing:
> the setup in my ZJ looks like the one in the pics sent by Bill ------.
>
> http://members.***.net/wilsond/Fixes...tml#CPSdetails
Most will, that's my ZJ with the 42RE transmission.
That one connects by the dipstick tube on the passenger side.
> Billy Ray wrote:
>
>> Well.... could be. Most of the other references have it on the passenger
>> side and I sure gave a good look there for it.
>>
>> After taking a break and looking around underneath we found it on the
>> driver's side and the wiring ran up to a connector on the intake manifold.
>>
>> http://www.imagestation.com/album/?id=2119338336
That is the other one, there were two transmissions that year.
http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
And your correct, that sensor will be connected by the manifold.
This will give you some ideas on how to get that sucker out.
http://members.***.net/wilsond/cps/
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> the setup in my ZJ looks like the one in the pics sent by Bill ------.
>
> http://members.***.net/wilsond/Fixes...tml#CPSdetails
Most will, that's my ZJ with the 42RE transmission.
That one connects by the dipstick tube on the passenger side.
> Billy Ray wrote:
>
>> Well.... could be. Most of the other references have it on the passenger
>> side and I sure gave a good look there for it.
>>
>> After taking a break and looking around underneath we found it on the
>> driver's side and the wiring ran up to a connector on the intake manifold.
>>
>> http://www.imagestation.com/album/?id=2119338336
That is the other one, there were two transmissions that year.
http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
And your correct, that sensor will be connected by the manifold.
This will give you some ideas on how to get that sucker out.
http://members.***.net/wilsond/cps/
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
10-10-2005, 10:07 AM
#43
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
Ron Croonenberg did pass the time by typing:
> the setup in my ZJ looks like the one in the pics sent by Bill ------.
>
> http://members.***.net/wilsond/Fixes...tml#CPSdetails
Most will, that's my ZJ with the 42RE transmission.
That one connects by the dipstick tube on the passenger side.
> Billy Ray wrote:
>
>> Well.... could be. Most of the other references have it on the passenger
>> side and I sure gave a good look there for it.
>>
>> After taking a break and looking around underneath we found it on the
>> driver's side and the wiring ran up to a connector on the intake manifold.
>>
>> http://www.imagestation.com/album/?id=2119338336
That is the other one, there were two transmissions that year.
http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
And your correct, that sensor will be connected by the manifold.
This will give you some ideas on how to get that sucker out.
http://members.***.net/wilsond/cps/
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> the setup in my ZJ looks like the one in the pics sent by Bill ------.
>
> http://members.***.net/wilsond/Fixes...tml#CPSdetails
Most will, that's my ZJ with the 42RE transmission.
That one connects by the dipstick tube on the passenger side.
> Billy Ray wrote:
>
>> Well.... could be. Most of the other references have it on the passenger
>> side and I sure gave a good look there for it.
>>
>> After taking a break and looking around underneath we found it on the
>> driver's side and the wiring ran up to a connector on the intake manifold.
>>
>> http://www.imagestation.com/album/?id=2119338336
That is the other one, there were two transmissions that year.
http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
And your correct, that sensor will be connected by the manifold.
This will give you some ideas on how to get that sucker out.
http://members.***.net/wilsond/cps/
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
10-10-2005, 12:00 PM
#44
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
> Most will, that's my ZJ with the 42RE transmission.
> That one connects by the dipstick tube on the passenger side.
ah..ok...
> That is the other one, there were two transmissions that year.
> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
> And your correct, that sensor will be connected by the manifold.
>
> This will give you some ideas on how to get that sucker out.
> http://members.***.net/wilsond/cps/
was it a lot of fun replacing that one ?
(I think I might try the poor mans diagnostic with multimeter first)
Ron
10-10-2005, 12:00 PM
#45
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
> Most will, that's my ZJ with the 42RE transmission.
> That one connects by the dipstick tube on the passenger side.
ah..ok...
> That is the other one, there were two transmissions that year.
> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
> And your correct, that sensor will be connected by the manifold.
>
> This will give you some ideas on how to get that sucker out.
> http://members.***.net/wilsond/cps/
was it a lot of fun replacing that one ?
(I think I might try the poor mans diagnostic with multimeter first)
Ron
10-10-2005, 12:00 PM
#46
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
> Most will, that's my ZJ with the 42RE transmission.
> That one connects by the dipstick tube on the passenger side.
ah..ok...
> That is the other one, there were two transmissions that year.
> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
> And your correct, that sensor will be connected by the manifold.
>
> This will give you some ideas on how to get that sucker out.
> http://members.***.net/wilsond/cps/
was it a lot of fun replacing that one ?
(I think I might try the poor mans diagnostic with multimeter first)
Ron
10-10-2005, 02:03 PM
#47
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
Ron Croonenberg did pass the time by typing:
>> Most will, that's my ZJ with the 42RE transmission.
>> That one connects by the dipstick tube on the passenger side.
>
> ah..ok...
>
>> That is the other one, there were two transmissions that year.
>> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
>> And your correct, that sensor will be connected by the manifold.
>>
>> This will give you some ideas on how to get that sucker out.
>> http://members.***.net/wilsond/cps/
>
> was it a lot of fun replacing that one ?
Yep. Loads. Actually it wasn't that bad but it did take
time figuring out how to get the tools in there and on that
bolt without dropping them in my face more than a couple of times.
> (I think I might try the poor mans diagnostic with multimeter first)
I took those measurements just for grins. The best measurement
would be with a digital o-scope. But not everyone has those tools
at hand. http://www.revbeergoggles.com/temp/o-scope.jpg
I've been wanting to record what the pulses look like but other
things have taken priority.
--
DougW
>> Most will, that's my ZJ with the 42RE transmission.
>> That one connects by the dipstick tube on the passenger side.
>
> ah..ok...
>
>> That is the other one, there were two transmissions that year.
>> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
>> And your correct, that sensor will be connected by the manifold.
>>
>> This will give you some ideas on how to get that sucker out.
>> http://members.***.net/wilsond/cps/
>
> was it a lot of fun replacing that one ?
Yep. Loads. Actually it wasn't that bad but it did take
time figuring out how to get the tools in there and on that
bolt without dropping them in my face more than a couple of times.
> (I think I might try the poor mans diagnostic with multimeter first)
I took those measurements just for grins. The best measurement
would be with a digital o-scope. But not everyone has those tools
at hand. http://www.revbeergoggles.com/temp/o-scope.jpg
I've been wanting to record what the pulses look like but other
things have taken priority.
--
DougW
10-10-2005, 02:03 PM
#48
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
Ron Croonenberg did pass the time by typing:
>> Most will, that's my ZJ with the 42RE transmission.
>> That one connects by the dipstick tube on the passenger side.
>
> ah..ok...
>
>> That is the other one, there were two transmissions that year.
>> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
>> And your correct, that sensor will be connected by the manifold.
>>
>> This will give you some ideas on how to get that sucker out.
>> http://members.***.net/wilsond/cps/
>
> was it a lot of fun replacing that one ?
Yep. Loads. Actually it wasn't that bad but it did take
time figuring out how to get the tools in there and on that
bolt without dropping them in my face more than a couple of times.
> (I think I might try the poor mans diagnostic with multimeter first)
I took those measurements just for grins. The best measurement
would be with a digital o-scope. But not everyone has those tools
at hand. http://www.revbeergoggles.com/temp/o-scope.jpg
I've been wanting to record what the pulses look like but other
things have taken priority.
--
DougW
>> Most will, that's my ZJ with the 42RE transmission.
>> That one connects by the dipstick tube on the passenger side.
>
> ah..ok...
>
>> That is the other one, there were two transmissions that year.
>> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
>> And your correct, that sensor will be connected by the manifold.
>>
>> This will give you some ideas on how to get that sucker out.
>> http://members.***.net/wilsond/cps/
>
> was it a lot of fun replacing that one ?
Yep. Loads. Actually it wasn't that bad but it did take
time figuring out how to get the tools in there and on that
bolt without dropping them in my face more than a couple of times.
> (I think I might try the poor mans diagnostic with multimeter first)
I took those measurements just for grins. The best measurement
would be with a digital o-scope. But not everyone has those tools
at hand. http://www.revbeergoggles.com/temp/o-scope.jpg
I've been wanting to record what the pulses look like but other
things have taken priority.
--
DougW
10-10-2005, 02:03 PM
#49
Guest
Posts: n/a
Re: '93 Grand cherokee start problem.
Ron Croonenberg did pass the time by typing:
>> Most will, that's my ZJ with the 42RE transmission.
>> That one connects by the dipstick tube on the passenger side.
>
> ah..ok...
>
>> That is the other one, there were two transmissions that year.
>> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
>> And your correct, that sensor will be connected by the manifold.
>>
>> This will give you some ideas on how to get that sucker out.
>> http://members.***.net/wilsond/cps/
>
> was it a lot of fun replacing that one ?
Yep. Loads. Actually it wasn't that bad but it did take
time figuring out how to get the tools in there and on that
bolt without dropping them in my face more than a couple of times.
> (I think I might try the poor mans diagnostic with multimeter first)
I took those measurements just for grins. The best measurement
would be with a digital o-scope. But not everyone has those tools
at hand. http://www.revbeergoggles.com/temp/o-scope.jpg
I've been wanting to record what the pulses look like but other
things have taken priority.
--
DougW
>> Most will, that's my ZJ with the 42RE transmission.
>> That one connects by the dipstick tube on the passenger side.
>
> ah..ok...
>
>> That is the other one, there were two transmissions that year.
>> http://members.***.net/wilsond/Fixes/sensor-cps-new.jpg
>> And your correct, that sensor will be connected by the manifold.
>>
>> This will give you some ideas on how to get that sucker out.
>> http://members.***.net/wilsond/cps/
>
> was it a lot of fun replacing that one ?
Yep. Loads. Actually it wasn't that bad but it did take
time figuring out how to get the tools in there and on that
bolt without dropping them in my face more than a couple of times.
> (I think I might try the poor mans diagnostic with multimeter first)
I took those measurements just for grins. The best measurement
would be with a digital o-scope. But not everyone has those tools
at hand. http://www.revbeergoggles.com/temp/o-scope.jpg
I've been wanting to record what the pulses look like but other
things have taken priority.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
KrownLakeshore
Krown Lakeshore - Jeep Accessories
0
06-09-2010 12:42 PM
jondmclin@yahoo.com
Jeep Mailing List
9
02-25-2007 09:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)