'88 Grand Wagon frame rusted
04-17-2007, 07:22 PM
#61
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Do you do this on purpose or do you have no clue how to trim a thread?
> From what I have read on several groups, you do this consistently.
I know what you purpose is, to be a troll with a ego problem. You try
to discredit anyone that you feel threatened by. Said part is
knowledge is not a threat except to maybe someone to inmature as
yourself to realize. You may think otherwise but you are still a green
horn in a 4x4 world though you are a legend in your own mind.
-----------------
TheSnoMan.com
wrote:
>Do you do this on purpose or do you have no clue how to trim a thread?
> From what I have read on several groups, you do this consistently.
I know what you purpose is, to be a troll with a ego problem. You try
to discredit anyone that you feel threatened by. Said part is
knowledge is not a threat except to maybe someone to inmature as
yourself to realize. You may think otherwise but you are still a green
horn in a 4x4 world though you are a legend in your own mind.
-----------------
TheSnoMan.com
04-17-2007, 07:22 PM
#62
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
wrote:
>Do you do this on purpose or do you have no clue how to trim a thread?
> From what I have read on several groups, you do this consistently.
I know what you purpose is, to be a troll with a ego problem. You try
to discredit anyone that you feel threatened by. Said part is
knowledge is not a threat except to maybe someone to inmature as
yourself to realize. You may think otherwise but you are still a green
horn in a 4x4 world though you are a legend in your own mind.
-----------------
TheSnoMan.com
wrote:
>Do you do this on purpose or do you have no clue how to trim a thread?
> From what I have read on several groups, you do this consistently.
I know what you purpose is, to be a troll with a ego problem. You try
to discredit anyone that you feel threatened by. Said part is
knowledge is not a threat except to maybe someone to inmature as
yourself to realize. You may think otherwise but you are still a green
horn in a 4x4 world though you are a legend in your own mind.
-----------------
TheSnoMan.com
04-17-2007, 07:29 PM
#63
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
On Tue, 17 Apr 2007 14:41:59 -0600, "Earle Horton"
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
04-17-2007, 07:29 PM
#64
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
On Tue, 17 Apr 2007 14:41:59 -0600, "Earle Horton"
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
04-17-2007, 07:29 PM
#65
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
On Tue, 17 Apr 2007 14:41:59 -0600, "Earle Horton"
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
04-17-2007, 07:29 PM
#66
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
On Tue, 17 Apr 2007 14:41:59 -0600, "Earle Horton"
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
<apodo@gracioso.usa> wrote:
>A replacement frame for a CJ is $1,799.99. This is made by a company that
>has done a few of them, so some economy of scale kicks in. A Wagoneer frame
>would have to be a one-off, so maybe double the price, plus shipping, plus
>installation.
Why a new frame in aftermarket for a steep price? Get a frame from
down south or out west that has never seen salt and even if you spend
several hundred buck getting it shipped in you will still be far ahead
of the game money wise. Also like a said earlier, that frame design
was used for over 20 years (actually close to 30 years) unlike frames
in other detriot 4x4's so that makes it a a bit eaiser to find one in
that you are not confinned to just a few model years. BTW, it I really
want a custom frame I would still find a clean old frame and then have
it fully boxed and have a stronger frame that cost less than a
aftermarket replacement.
-----------------
TheSnoMan.com
04-17-2007, 07:32 PM
#67
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
"SnoMan" <admin@snoman.com> wrote in message
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
04-17-2007, 07:32 PM
#68
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
"SnoMan" <admin@snoman.com> wrote in message
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
04-17-2007, 07:32 PM
#69
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
"SnoMan" <admin@snoman.com> wrote in message
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
04-17-2007, 07:32 PM
#70
Guest
Posts: n/a
Re: Re: '88 Grand Wagon frame rusted
"SnoMan" <admin@snoman.com> wrote in message
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
news:qela239s9vqaak55heqfks8opdhs8ftn56@4ax.com...
> On Tue, 17 Apr 2007 16:13:11 -0400, Mike Romain <romainm@sympatico.ca>
> wrote:
>
> >Do you do this on purpose or do you have no clue how to trim a thread?
> > From what I have read on several groups, you do this consistently.
>
>
> I know what you purpose is, to be a troll with a ego problem. You try
"your purpose", "a troll with an ego problem"
> to discredit anyone that you feel threatened by. Said part is
"sad part"
> knowledge is not a threat except to maybe someone to inmature as
"maybe to someone as immature as"
> yourself to realize. You may think otherwise but you are still a green
> horn in a 4x4 world though you are a legend in your own mind.
When you flame in ungrammatical English, it just makes people laugh.
Earle Horton
http://xorton.blogspot.com
