73 cj5
05-26-2004, 08:45 AM
#41
Guest
Posts: n/a
Re: 73 cj5
i was told i did not have a balist resistor i was told i have a resistive
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
05-26-2004, 09:15 AM
#42
Guest
Posts: n/a
Re: 73 cj5
That vintage shoud have a ballast resistor. The issuie here is simply that
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
05-26-2004, 09:15 AM
#43
Guest
Posts: n/a
Re: 73 cj5
That vintage shoud have a ballast resistor. The issuie here is simply that
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
05-26-2004, 09:15 AM
#44
Guest
Posts: n/a
Re: 73 cj5
That vintage shoud have a ballast resistor. The issuie here is simply that
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
05-26-2004, 09:15 AM
#45
Guest
Posts: n/a
Re: 73 cj5
That vintage shoud have a ballast resistor. The issuie here is simply that
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
you have no power to the coil when the key is in the "ON" position, opnly
when it is in the "start" position. YTou need a wiring diagram showing the
starting circuit for that MY & powertrain. Then you need to replace the
missing wiring.
Did this friggin' thing run before you bought it? If so, what happened
afterwqards? In other words, what repairs or mods were done that caused this
problem?
"KC" <kcmidget@cfl.rr.com> wrote in message
news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> i was told i did not have a balist resistor i was told i have a resistive
> wire ?
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B3FFE8.A752AEE3@***.net...
> > Then it's this resistor ballast or a connection to it that's bolted
> > to the firewall more to the center than this one:
> > http://www.----------.com/SteveCoilResistor.jpg
> > God Bless America, ßill O|||||||O
> > mailto:--------------------
> > KC wrote:
> > >
> > > that is exactly what is happening
> >
>
>
05-26-2004, 09:37 AM
#46
Guest
Posts: n/a
Re: 73 cj5
I'm pretty sure that he said that he doesn't have the ceramic resistor,
but rather the OEM resistive wire spliced into the harness.
In any case, KC should measure the voltage at the [+] terminal at the coil
with the key switch in the "run" position.
On Tue, 25 May 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
05-26-2004, 09:37 AM
#47
Guest
Posts: n/a
Re: 73 cj5
I'm pretty sure that he said that he doesn't have the ceramic resistor,
but rather the OEM resistive wire spliced into the harness.
In any case, KC should measure the voltage at the [+] terminal at the coil
with the key switch in the "run" position.
On Tue, 25 May 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
05-26-2004, 09:37 AM
#48
Guest
Posts: n/a
Re: 73 cj5
I'm pretty sure that he said that he doesn't have the ceramic resistor,
but rather the OEM resistive wire spliced into the harness.
In any case, KC should measure the voltage at the [+] terminal at the coil
with the key switch in the "run" position.
On Tue, 25 May 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
05-26-2004, 09:37 AM
#49
Guest
Posts: n/a
Re: 73 cj5
I'm pretty sure that he said that he doesn't have the ceramic resistor,
but rather the OEM resistive wire spliced into the harness.
In any case, KC should measure the voltage at the [+] terminal at the coil
with the key switch in the "run" position.
On Tue, 25 May 2004, L.W.([iso-8859-1] ßill) ------ III wrote:
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
05-26-2004, 09:56 AM
#50
Guest
Posts: n/a
Re: 73 cj5
it did not run when i purchased it thanks for all your help
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c9259b0hkd@enews1.newsguy.com...
> That vintage shoud have a ballast resistor. The issuie here is simply that
> you have no power to the coil when the key is in the "ON" position, opnly
> when it is in the "start" position. YTou need a wiring diagram showing the
> starting circuit for that MY & powertrain. Then you need to replace the
> missing wiring.
>
> Did this friggin' thing run before you bought it? If so, what happened
> afterwqards? In other words, what repairs or mods were done that caused
this
> problem?
>
>
> "KC" <kcmidget@cfl.rr.com> wrote in message
> news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> > i was told i did not have a balist resistor i was told i have a
resistive
> > wire ?
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B3FFE8.A752AEE3@***.net...
> > > Then it's this resistor ballast or a connection to it that's
bolted
> > > to the firewall more to the center than this one:
> > > http://www.----------.com/SteveCoilResistor.jpg
> > > God Bless America, ßill O|||||||O
> > > mailto:--------------------
> > > KC wrote:
> > > >
> > > > that is exactly what is happening
> > >
> >
> >
>
>
>
"Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
news:c9259b0hkd@enews1.newsguy.com...
> That vintage shoud have a ballast resistor. The issuie here is simply that
> you have no power to the coil when the key is in the "ON" position, opnly
> when it is in the "start" position. YTou need a wiring diagram showing the
> starting circuit for that MY & powertrain. Then you need to replace the
> missing wiring.
>
> Did this friggin' thing run before you bought it? If so, what happened
> afterwqards? In other words, what repairs or mods were done that caused
this
> problem?
>
>
> "KC" <kcmidget@cfl.rr.com> wrote in message
> news:ak0tc.23252$0X2.690619@twister.tampabay.rr.co m...
> > i was told i did not have a balist resistor i was told i have a
resistive
> > wire ?
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B3FFE8.A752AEE3@***.net...
> > > Then it's this resistor ballast or a connection to it that's
bolted
> > > to the firewall more to the center than this one:
> > > http://www.----------.com/SteveCoilResistor.jpg
> > > God Bless America, ßill O|||||||O
> > > mailto:--------------------
> > > KC wrote:
> > > >
> > > > that is exactly what is happening
> > >
> >
> >
>
>
>
