73 cj5
#31
Guest
Posts: n/a
Re: 73 cj5
that is exactly what is happening
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40B3CFB8.A3B45187@sympatico.ca...
> You forgot to answer the question....
>
> Does it 'run' as long as the starter is turning and then die when the
> key goes to 'run' or not?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> KC wrote:
> >
> > I don't have one on the fire wall. I do have a resistive wire that Ohms
out
> > at 480 any other ideas? tia
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B0FF9F.155F110D@***.net...
> > > Like it's running as long as you have the ignition key turned to
> > > start, like the coil's only being powered by the starter solenoid? See
> > > if your volt meter shows any power at the coil resister ballast,
usually
> > > a white porcelain block bolted to your firewall, while the ignition is
> > > in the on position.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > KC wrote:
> > > >
> > > > ok got the electrical part fixed now it turns over and starts just
wont
> > stay
> > > > started
> > > > any suggestions
> > > > thank you so much
> > >
>
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40B3CFB8.A3B45187@sympatico.ca...
> You forgot to answer the question....
>
> Does it 'run' as long as the starter is turning and then die when the
> key goes to 'run' or not?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> KC wrote:
> >
> > I don't have one on the fire wall. I do have a resistive wire that Ohms
out
> > at 480 any other ideas? tia
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B0FF9F.155F110D@***.net...
> > > Like it's running as long as you have the ignition key turned to
> > > start, like the coil's only being powered by the starter solenoid? See
> > > if your volt meter shows any power at the coil resister ballast,
usually
> > > a white porcelain block bolted to your firewall, while the ignition is
> > > in the on position.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > KC wrote:
> > > >
> > > > ok got the electrical part fixed now it turns over and starts just
wont
> > stay
> > > > started
> > > > any suggestions
> > > > thank you so much
> > >
>
#32
Guest
Posts: n/a
Re: 73 cj5
that is exactly what is happening
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40B3CFB8.A3B45187@sympatico.ca...
> You forgot to answer the question....
>
> Does it 'run' as long as the starter is turning and then die when the
> key goes to 'run' or not?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> KC wrote:
> >
> > I don't have one on the fire wall. I do have a resistive wire that Ohms
out
> > at 480 any other ideas? tia
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B0FF9F.155F110D@***.net...
> > > Like it's running as long as you have the ignition key turned to
> > > start, like the coil's only being powered by the starter solenoid? See
> > > if your volt meter shows any power at the coil resister ballast,
usually
> > > a white porcelain block bolted to your firewall, while the ignition is
> > > in the on position.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > KC wrote:
> > > >
> > > > ok got the electrical part fixed now it turns over and starts just
wont
> > stay
> > > > started
> > > > any suggestions
> > > > thank you so much
> > >
>
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40B3CFB8.A3B45187@sympatico.ca...
> You forgot to answer the question....
>
> Does it 'run' as long as the starter is turning and then die when the
> key goes to 'run' or not?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> KC wrote:
> >
> > I don't have one on the fire wall. I do have a resistive wire that Ohms
out
> > at 480 any other ideas? tia
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B0FF9F.155F110D@***.net...
> > > Like it's running as long as you have the ignition key turned to
> > > start, like the coil's only being powered by the starter solenoid? See
> > > if your volt meter shows any power at the coil resister ballast,
usually
> > > a white porcelain block bolted to your firewall, while the ignition is
> > > in the on position.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > KC wrote:
> > > >
> > > > ok got the electrical part fixed now it turns over and starts just
wont
> > stay
> > > > started
> > > > any suggestions
> > > > thank you so much
> > >
>
#33
Guest
Posts: n/a
Re: 73 cj5
that is exactly what is happening
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40B3CFB8.A3B45187@sympatico.ca...
> You forgot to answer the question....
>
> Does it 'run' as long as the starter is turning and then die when the
> key goes to 'run' or not?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> KC wrote:
> >
> > I don't have one on the fire wall. I do have a resistive wire that Ohms
out
> > at 480 any other ideas? tia
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B0FF9F.155F110D@***.net...
> > > Like it's running as long as you have the ignition key turned to
> > > start, like the coil's only being powered by the starter solenoid? See
> > > if your volt meter shows any power at the coil resister ballast,
usually
> > > a white porcelain block bolted to your firewall, while the ignition is
> > > in the on position.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > KC wrote:
> > > >
> > > > ok got the electrical part fixed now it turns over and starts just
wont
> > stay
> > > > started
> > > > any suggestions
> > > > thank you so much
> > >
>
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40B3CFB8.A3B45187@sympatico.ca...
> You forgot to answer the question....
>
> Does it 'run' as long as the starter is turning and then die when the
> key goes to 'run' or not?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> KC wrote:
> >
> > I don't have one on the fire wall. I do have a resistive wire that Ohms
out
> > at 480 any other ideas? tia
> > "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> > news:40B0FF9F.155F110D@***.net...
> > > Like it's running as long as you have the ignition key turned to
> > > start, like the coil's only being powered by the starter solenoid? See
> > > if your volt meter shows any power at the coil resister ballast,
usually
> > > a white porcelain block bolted to your firewall, while the ignition is
> > > in the on position.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > KC wrote:
> > > >
> > > > ok got the electrical part fixed now it turns over and starts just
wont
> > stay
> > > > started
> > > > any suggestions
> > > > thank you so much
> > >
>
#34
Guest
Posts: n/a
Re: 73 cj5
Then it's this resistor ballast or a connection to it that's bolted
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
#35
Guest
Posts: n/a
Re: 73 cj5
Then it's this resistor ballast or a connection to it that's bolted
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
#36
Guest
Posts: n/a
Re: 73 cj5
Then it's this resistor ballast or a connection to it that's bolted
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
#37
Guest
Posts: n/a
Re: 73 cj5
Then it's this resistor ballast or a connection to it that's bolted
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
to the firewall more to the center than this one:
http://www.----------.com/SteveCoilResistor.jpg
God Bless America, ßill O|||||||O
mailto:--------------------
KC wrote:
>
> that is exactly what is happening
#38
Guest
Posts: n/a
Re: 73 cj5
i was told i did not have a balist resistor i was told i have a resistive
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
#39
Guest
Posts: n/a
Re: 73 cj5
i was told i did not have a balist resistor i was told i have a resistive
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
#40
Guest
Posts: n/a
Re: 73 cj5
i was told i did not have a balist resistor i was told i have a resistive
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>
wire ?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B3FFE8.A752AEE3@***.net...
> Then it's this resistor ballast or a connection to it that's bolted
> to the firewall more to the center than this one:
> http://www.----------.com/SteveCoilResistor.jpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
> KC wrote:
> >
> > that is exactly what is happening
>